Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  tegra2: Optimize out-of-tree build for Ventana.
  tegra: Move boards over to use arch-level board UART function
  tegra: Add support for UART init in cpu board.c
  tegra: Add a function mux feature
  tegra: add clock_ll_start_uart() to enable UART prior to reloc
  tegra: Move clock_early_init() to arch_cpu_init()
  tegra: Move cpu_init_cp15() to arch_cpu_init()
  arm: Tegra: Fix Harmony and Ventana builds in u-boot-tegra/master
  tegra: Fix build error in plutux, medcom
  tegra2: Add Avionic Design Medcom support.
  tegra2: Add Avionic Design Plutux support.
  tegra2: Add common Avionic Design Tamonten support.
  tegra2: Move tegra2_mmc_init() prototype to public header.
  tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000.
  tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
  tegra2: Plumb in SPI/UART switch code
  tegra2: spi: Support SPI / UART switch
  tegra2: Implement SPI / UART GPIO switch
  tegra2: Enable SPI environment on Seaboard
  tegra2: config: Enable SPI flash on Seaboard
  tegra2: spi: Add SPI driver for Tegra2 SOC
  tegra2: Add UARTB support
  tegra2: Tidy UART selection
  arm, davinci: Fix build warnings for cam_enc_4xx
  Devkit8000: Switch over to enable_gpmc_cs_config
  arm, davinci: Add support for generating AIS images to the Makefile
  mkimage: Fix variable length header support
  arm, da850evm: Add an SPL for SPI boot
  arm, davinci: Add SPL support for DA850 SoCs
  sf: Add spi_boot() to allow booting from SPI flash in an SPL
  spl: display_options.o is required for SPI flash support in SPL
  ARM: omap3: add support to Technexion twister board
  ARM: omap3: added common configuration for Technexion TAM3517
  vision2: Fix checkpatch warning

.gitignore

@@ -35,6 +35,7 @@
 /u-boot.dis
 /u-boot.lds
 /u-boot.ubl
+/u-boot.ais
 /u-boot.dtb
 /u-boot.sb
 

MAINTAINERS

@@ -572,6 +572,7 @@ Stefano Babic <sbabic@denx.de>
 	mx51evk		i.MX51
 	polaris		xscale/pxa
 	trizepsiv	xscale/pxa
+	twister		omap3
  	vision2		i.MX51
 
 Jason Liu <r64343@freescale.com>
@@ -782,6 +783,11 @@ Stelian Pop <stelian@popies.net>
 	at91sam9263ek	ARM926EJS (AT91SAM9263 SoC)
 	at91sam9rlek	ARM926EJS (AT91SAM9RL SoC)
 
+Thierry Reding <thierry.reding@avionic-design.de>
+
+	plutux		Tegra2 (ARM7 & A9 Dual Core)
+	medcom		Tegra2 (ARM7 & A9 Dual Core)
+
 Tom Rini <trini@ti.com>
 
 	omap3_evm	ARM ARMV7 (OMAP3xx SoC)

Makefile

@@ -429,6 +429,18 @@ $(obj)u-boot.ubl:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
 		rm $(obj)u-boot-ubl.bin
 		rm $(obj)spl/u-boot-spl-pad.bin
 
+$(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+		$(obj)tools/mkimage -s -n /dev/null -T aisimage \
+			-e $(CONFIG_SPL_TEXT_BASE) \
+			-d $(obj)spl/u-boot-spl.bin \
+			$(obj)spl/u-boot-spl.ais
+		$(OBJCOPY) ${OBJCFLAGS} -I binary \
+			--pad-to=$(CONFIG_SPL_MAX_SIZE) -O binary \
+			$(obj)spl/u-boot-spl.ais $(obj)spl/u-boot-spl-pad.ais
+		cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.bin > \
+			$(obj)u-boot.ais
+		rm $(obj)spl/u-boot-spl{,-pad}.ais
+
 $(obj)u-boot.sb:       $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
 		elftosb -zdf imx28 -c $(TOPDIR)/board/$(BOARDDIR)/u-boot.bd \
 			-o $(obj)u-boot.sb
@@ -762,6 +774,7 @@ clobber:	tidy
 	@rm -f $(obj)u-boot.kwb
 	@rm -f $(obj)u-boot.imx
 	@rm -f $(obj)u-boot.ubl
+	@rm -f $(obj)u-boot.ais
 	@rm -f $(obj)u-boot.dtb
 	@rm -f $(obj)u-boot.sb
 	@rm -f $(obj)tools/inca-swap-bytes

arch/arm/cpu/arm926ejs/davinci/Makefile

@@ -38,7 +38,8 @@ COBJS-$(CONFIG_DRIVER_TI_EMAC)	+= lxt972.o dp83848.o et1011c.o ksz8873.o
 
 ifdef CONFIG_SPL_BUILD
 COBJS-y	+= spl.o
-COBJS-y	+= dm365_lowlevel.o
+COBJS-$(CONFIG_SOC_DM365)	+= dm365_lowlevel.o
+COBJS-$(CONFIG_SOC_DA8XX)	+= da850_lowlevel.o
 endif
 
 SOBJS	= reset.o

arch/arm/cpu/arm926ejs/davinci/spl.c

@@ -26,6 +26,17 @@
 #include <nand.h>
 #include <asm/arch/dm365_lowlevel.h>
 #include <ns16550.h>
+#include <malloc.h>
+#include <spi_flash.h>
+
+#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
+
+DECLARE_GLOBAL_DATA_PTR;
+/* Define global data structure pointer to it*/
+static gd_t gdata __attribute__ ((section(".data")));
+static bd_t bdata __attribute__ ((section(".data")));
+
+#else
 
 void puts(const char *str)
 {
@@ -41,6 +52,8 @@ void putc(char c)
 	NS16550_putc((NS16550_t)(CONFIG_SYS_NS16550_COM1), c);
 }
 
+#endif /* CONFIG_SPL_LIBCOMMON_SUPPORT */
+
 inline void hang(void)
 {
 	puts("### ERROR ### Please RESET the board ###\n");
@@ -50,14 +63,34 @@ inline void hang(void)
 
 void board_init_f(ulong dummy)
 {
+#ifdef CONFIG_SOC_DM365
 	dm36x_lowlevel_init(0);
+#endif
+#ifdef CONFIG_SOC_DA8XX
+	arch_cpu_init();
+#endif
 	relocate_code(CONFIG_SPL_STACK, NULL, CONFIG_SPL_TEXT_BASE);
 }
 
 void board_init_r(gd_t *id, ulong dummy)
 {
-
+#ifdef CONFIG_SOC_DM365
 	nand_init();
 	puts("Nand boot...\n");
 	nand_boot();
+#endif
+#ifdef CONFIG_SOC_DA8XX
+	mem_malloc_init(CONFIG_SYS_TEXT_BASE - CONFIG_SYS_MALLOC_LEN,
+			CONFIG_SYS_MALLOC_LEN);
+
+	gd = &gdata;
+	gd->bd = &bdata;
+	gd->flags |= GD_FLG_RELOC;
+	gd->baudrate = CONFIG_BAUDRATE;
+	serial_init();          /* serial communications setup */
+	gd->have_console = 1;
+
+	puts("SPI boot...\n");
+	spi_boot();
+#endif
 }

arch/arm/cpu/armv7/tegra2/Makefile

@@ -33,7 +33,7 @@ include $(TOPDIR)/config.mk
 LIB	=  $(obj)lib$(SOC).o
 
 SOBJS	:= lowlevel_init.o
-COBJS	:= ap20.o board.o clock.o pinmux.o sys_info.o timer.o
+COBJS	:= ap20.o board.o clock.o funcmux.o pinmux.o sys_info.o timer.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))

arch/arm/cpu/armv7/tegra2/board.c

@@ -24,12 +24,22 @@
 #include <common.h>
 #include <asm/io.h>
 #include "ap20.h"
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/tegra2.h>
 #include <asm/arch/pmc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+enum {
+	/* UARTs which we can enable */
+	UARTA	= 1 << 0,
+	UARTB	= 1 << 1,
+	UARTD	= 1 << 3,
+	UART_COUNT = 4,
+};
+
 /*
  * Boot ROM initializes the odmdata in APBDEV_PMC_SCRATCH20_0,
  * so we are using this value to identify memory size.
@@ -80,6 +90,54 @@ int arch_cpu_init(void)
 {
 	/* Fire up the Cortex A9 */
 	tegra2_start();
+
+	/* We didn't do this init in start.S, so do it now */
+	cpu_init_cp15();
+
+	/* Initialize essential common plls */
+	clock_early_init();
+
 	return 0;
 }
 #endif
+
+/**
+ * Set up the specified uarts
+ *
+ * @param uarts_ids	Mask containing UARTs to init (UARTx)
+ */
+static void setup_uarts(int uart_ids)
+{
+	static enum periph_id id_for_uart[] = {
+		PERIPH_ID_UART1,
+		PERIPH_ID_UART2,
+		PERIPH_ID_UART3,
+		PERIPH_ID_UART4,
+	};
+	size_t i;
+
+	for (i = 0; i < UART_COUNT; i++) {
+		if (uart_ids & (1 << i)) {
+			enum periph_id id = id_for_uart[i];
+
+			funcmux_select(id, 0);
+			clock_ll_start_uart(id);
+		}
+	}
+}
+
+void board_init_uart_f(void)
+{
+	int uart_ids = 0;	/* bit mask of which UART ids to enable */
+
+#ifdef CONFIG_TEGRA2_ENABLE_UARTA
+	uart_ids |= UARTA;
+#endif
+#ifdef CONFIG_TEGRA2_ENABLE_UARTB
+	uart_ids |= UARTB;
+#endif
+#ifdef CONFIG_TEGRA2_ENABLE_UARTD
+	uart_ids |= UARTD;
+#endif
+	setup_uarts(uart_ids);
+}

arch/arm/cpu/armv7/tegra2/clock.c

@@ -904,6 +904,20 @@ static int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
 	return 0;
 }
 
+void clock_ll_start_uart(enum periph_id periph_id)
+{
+	/* Assert UART reset and enable clock */
+	reset_set_enable(periph_id, 1);
+	clock_enable(periph_id);
+	clock_ll_set_source(periph_id, 0); /* UARTx_CLK_SRC = 00, PLLP_OUT0 */
+
+	/* wait for 2us */
+	udelay(2);
+
+	/* De-assert reset to UART */
+	reset_set_enable(periph_id, 0);
+}
+
 int clock_verify(void)
 {
 	struct clk_pll *pll = get_pll(CLOCK_ID_PERIPH);

arch/arm/cpu/armv7/tegra2/config.mk

@@ -29,3 +29,5 @@
 ifdef CONFIG_TEGRA2
 CFLAGS_arch/arm/lib/board.o += -march=armv4t
 endif
+
+USE_PRIVATE_LIBGCC = yes

arch/arm/cpu/armv7/tegra2/funcmux.c

@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Tegra2 high-level function multiplexing */
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/pinmux.h>
+
+int funcmux_select(enum periph_id id, int config)
+{
+	if (config != 0) {
+		debug("%s: invalid config %d for periph_id %d", __func__,
+		      config, id);
+		return -1;
+	}
+	switch (id) {
+	case PERIPH_ID_UART1:
+		pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA);
+		pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA);
+		pinmux_tristate_disable(PINGRP_IRRX);
+		pinmux_tristate_disable(PINGRP_IRTX);
+		break;
+
+	case PERIPH_ID_UART2:
+		pinmux_set_func(PINGRP_UAD, PMUX_FUNC_IRDA);
+		pinmux_tristate_disable(PINGRP_UAD);
+		break;
+
+	case PERIPH_ID_UART4:
+		pinmux_set_func(PINGRP_GMC, PMUX_FUNC_UARTD);
+		pinmux_tristate_disable(PINGRP_GMC);
+		break;
+
+	default:
+		debug("%s: invalid periph_id %d", __func__, id);
+		return -1;
+	}
+
+	return 0;
+}

arch/arm/include/asm/arch-tegra2/board.h

@@ -0,0 +1,30 @@
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA_BOARD_H_
+#define _TEGRA_BOARD_H_
+
+/* Setup UARTs for the board according to the selected config */
+void board_init_uart_f(void);
+
+#endif

arch/arm/include/asm/arch-tegra2/clock.h

@@ -344,6 +344,17 @@ unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
  */
 unsigned clock_get_rate(enum clock_id clkid);
 
+/**
+ * Start up a UART using low-level calls
+ *
+ * Prior to relocation clock_start_periph_pll() cannot be called. This
+ * function provides a way to set up a UART using low-level calls which
+ * do not require BSS.
+ *
+ * @param periph_id	Peripheral ID of UART to enable (e,g, PERIPH_ID_UART1)
+ */
+void clock_ll_start_uart(enum periph_id periph_id);
+
 /*
  * Checks that clocks are valid and prints a warning if not
  *

arch/arm/include/asm/arch-tegra2/funcmux.h

@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Tegra2 high-level function multiplexing */
+
+#ifndef __FUNCMUX_H
+#define __FUNCMUX_H
+
+/**
+ * Select a config for a particular peripheral.
+ *
+ * Each peripheral can operate through a number of configurations,
+ * which are sets of pins that it uses to bring out its signals.
+ * The basic config is 0, and higher numbers indicate different
+ * pinmux settings to bring the peripheral out on other pins,
+ *
+ * @param id		Peripheral id
+ * @param config	Configuration to use (generally 0)
+ * @return 0 if ok, -1 on error (e.g. incorrect id or config)
+ */
+int funcmux_select(enum periph_id id, int config);
+
+#endif

arch/arm/include/asm/arch-tegra2/mmc.h

@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2011, Google Inc. All rights reserved.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA2_MMC_H_
+#define _TEGRA2_MMC_H_
+
+int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio);
+
+#endif /* TEGRA2_MMC_H_ */

arch/arm/include/asm/arch-tegra2/tegra2.h

@@ -38,6 +38,7 @@
 #define NV_PA_APB_UARTC_BASE	(NV_PA_APB_MISC_BASE + 0x6200)
 #define NV_PA_APB_UARTD_BASE	(NV_PA_APB_MISC_BASE + 0x6300)
 #define NV_PA_APB_UARTE_BASE	(NV_PA_APB_MISC_BASE + 0x6400)
+#define TEGRA2_SPI_BASE		(NV_PA_APB_MISC_BASE + 0xC380)
 #define NV_PA_PMC_BASE		0x7000E400
 #define NV_PA_CSITE_BASE	0x70040000
 

arch/arm/include/asm/arch-tegra2/tegra2_spi.h

@@ -0,0 +1,76 @@
+/*
+ * NVIDIA Tegra2 SPI-FLASH controller
+ *
+ * Copyright 2010-2011 NVIDIA Corporation
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA2_SPI_H_
+#define _TEGRA2_SPI_H_
+
+#include <asm/types.h>
+
+struct spi_tegra {
+	u32 command;	/* SPI_COMMAND_0 register  */
+	u32 status;	/* SPI_STATUS_0 register */
+	u32 rx_cmp;	/* SPI_RX_CMP_0 register  */
+	u32 dma_ctl;	/* SPI_DMA_CTL_0 register */
+	u32 tx_fifo;	/* SPI_TX_FIFO_0 register */
+	u32 rsvd[3];	/* offsets 0x14 to 0x1F reserved */
+	u32 rx_fifo;	/* SPI_RX_FIFO_0 register */
+};
+
+#define SPI_CMD_GO			(1 << 30)
+#define SPI_CMD_ACTIVE_SCLK_SHIFT	26
+#define SPI_CMD_ACTIVE_SCLK_MASK	(3 << SPI_CMD_ACTIVE_SCLK_SHIFT)
+#define SPI_CMD_CK_SDA			(1 << 21)
+#define SPI_CMD_ACTIVE_SDA_SHIFT	18
+#define SPI_CMD_ACTIVE_SDA_MASK		(3 << SPI_CMD_ACTIVE_SDA_SHIFT)
+#define SPI_CMD_CS_POL			(1 << 16)
+#define SPI_CMD_TXEN			(1 << 15)
+#define SPI_CMD_RXEN			(1 << 14)
+#define SPI_CMD_CS_VAL			(1 << 13)
+#define SPI_CMD_CS_SOFT			(1 << 12)
+#define SPI_CMD_CS_DELAY		(1 << 9)
+#define SPI_CMD_CS3_EN			(1 << 8)
+#define SPI_CMD_CS2_EN			(1 << 7)
+#define SPI_CMD_CS1_EN			(1 << 6)
+#define SPI_CMD_CS0_EN			(1 << 5)
+#define SPI_CMD_BIT_LENGTH		(1 << 4)
+#define SPI_CMD_BIT_LENGTH_MASK		0x0000001F
+
+#define SPI_STAT_BSY			(1 << 31)
+#define SPI_STAT_RDY			(1 << 30)
+#define SPI_STAT_RXF_FLUSH		(1 << 29)
+#define SPI_STAT_TXF_FLUSH		(1 << 28)
+#define SPI_STAT_RXF_UNR		(1 << 27)
+#define SPI_STAT_TXF_OVF		(1 << 26)
+#define SPI_STAT_RXF_EMPTY		(1 << 25)
+#define SPI_STAT_RXF_FULL		(1 << 24)
+#define SPI_STAT_TXF_EMPTY		(1 << 23)
+#define SPI_STAT_TXF_FULL		(1 << 22)
+#define SPI_STAT_SEL_TXRX_N		(1 << 16)
+#define SPI_STAT_CUR_BLKCNT		(1 << 15)
+
+#define SPI_TIMEOUT		1000
+#define TEGRA2_SPI_MAX_FREQ	52000000
+
+
+#endif	/* _TEGRA2_SPI_H_ */

arch/arm/include/asm/arch-tegra2/uart-spi-switch.h

@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _UART_SPI_SWITCH_H
+#define _UART_SPI_SWITCH_H
+
+#if defined(CONFIG_SPI_UART_SWITCH)
+/*
+ * Signal that we are about to use the UART. This unfortunate hack is
+ * required by Seaboard, which cannot use its console and SPI at the same
+ * time! If the board file provides this, the board config will declare it.
+ * Let this be a lesson for others.
+ */
+void pinmux_select_uart(NS16550_t regs);
+
+/*
+ * Signal that we are about the use the SPI bus.
+ */
+void pinmux_select_spi(void);
+
+#else /* not CONFIG_SPI_UART_SWITCH */
+
+static inline void pinmux_select_uart(NS16550_t regs) {}
+static inline void pinmux_select_spi(void) {}
+
+#endif
+
+#endif

board/avionic-design/common/tamonten.c

@@ -0,0 +1,116 @@
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ *  (C) Copyright 2011
+ *  Avionic Design GmbH <www.avionic-design.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/board.h>
+#include <asm/arch/tegra2.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/uart.h>
+#include <asm/arch/mmc.h>
+#include "tamonten.h"
+
+#ifdef CONFIG_TEGRA2_MMC
+#include <mmc.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct tegra2_sysinfo sysinfo = {
+	CONFIG_TEGRA2_BOARD_STRING
+};
+
+/*
+ * Routine: timer_init
+ * Description: init the timestamp and lastinc value
+ */
+int timer_init(void)
+{
+	return 0;
+}
+
+#ifdef CONFIG_TEGRA2_MMC
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the pin muxes/tristate values for the SDMMC(s)
+ */
+static void pin_mux_mmc(void)
+{
+	/* SDMMC4: config 3, x8 on 2nd set of pins */
+	pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
+	pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4);
+	pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4);
+
+	pinmux_tristate_disable(PINGRP_ATB);
+	pinmux_tristate_disable(PINGRP_GMA);
+	pinmux_tristate_disable(PINGRP_GME);
+}
+#endif
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+	clock_init();
+	clock_verify();
+
+	/* boot param addr */
+	gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
+
+	return 0;
+}
+
+#ifdef CONFIG_TEGRA2_MMC
+/* this is a weak define that we are overriding */
+int board_mmc_init(bd_t *bd)
+{
+	debug("board_mmc_init called\n");
+	/* Enable muxes, etc. for SDMMC controllers */
+	pin_mux_mmc();
+	gpio_config_mmc();
+
+	debug("board_mmc_init: init eMMC\n");
+	/* init dev 0, eMMC chip, with 4-bit bus */
+	tegra2_mmc_init(0, 4, -1, GPIO_PH2);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+	/* Initialize selected UARTs */
+	board_init_uart_f();
+	return 0;
+}
+#endif /* EARLY_INIT */

board/avionic-design/common/tamonten.h

@@ -0,0 +1,32 @@
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ *  (C) Copyright 2011
+ *  Avionic Design GmbH <www.avionic-design.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TAMONTEN_H_
+#define _TAMONTEN_H_
+
+void tegra2_start(void);
+void gpio_config_mmc(void);
+
+#endif /* TAMONTEN_H */

board/avionic-design/medcom/Makefile

@@ -0,0 +1,50 @@
+#
+#  (C) Copyright 2010,2011
+#  NVIDIA Corporation <www.nvidia.com>
+#  (C) Copyright 2011
+#  Avionic Design GmbH <www.avionic-design.de>
+#
+#  See file CREDITS for list of people who contributed to this
+#  project.
+#
+#  This program is free software; you can redistribute it and/or
+#  modify it under the terms of the GNU General Public License as
+#  published by the Free Software Foundation; either version 2 of
+#  the License, or (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+#  MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= $(BOARD).o
+COBJS	+= ../common/tamonten.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/avionic-design/medcom/medcom.c

@@ -0,0 +1,45 @@
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ *  (C) Copyright 2011
+ *  Avionic Design GmbH <www.avionic-design.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/tegra2.h>
+#ifdef CONFIG_TEGRA2_MMC
+#include <mmc.h>
+#endif
+
+#ifdef CONFIG_TEGRA2_MMC
+/*
+ * Routine: gpio_config_mmc
+ * Description: Set GPIOs for SD card
+ */
+void gpio_config_mmc(void)
+{
+	/* configure pin as input for card detect */
+	gpio_request(GPIO_PH2, "SD4 CD");
+	gpio_direction_input(GPIO_PH2);
+}
+#endif

board/avionic-design/plutux/Makefile

@@ -0,0 +1,50 @@
+#
+#  (C) Copyright 2010,2011
+#  NVIDIA Corporation <www.nvidia.com>
+#  (C) Copyright 2011
+#  Avionic Design GmbH <www.avionic-design.de>
+#
+#  See file CREDITS for list of people who contributed to this
+#  project.
+#
+#  This program is free software; you can redistribute it and/or
+#  modify it under the terms of the GNU General Public License as
+#  published by the Free Software Foundation; either version 2 of
+#  the License, or (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+#  MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= $(BOARD).o
+COBJS	+= ../common/tamonten.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/avionic-design/plutux/plutux.c

@@ -0,0 +1,45 @@
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ *  (C) Copyright 2011
+ *  Avionic Design GmbH <www.avionic-design.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/tegra2.h>
+#ifdef CONFIG_TEGRA2_MMC
+#include <mmc.h>
+#endif
+
+#ifdef CONFIG_TEGRA2_MMC
+/*
+ * Routine: gpio_config_mmc
+ * Description: Set GPIOs for SD card
+ */
+void gpio_config_mmc(void)
+{
+	/* configure pin as input for card detect */
+	gpio_request(GPIO_PH2, "SD4 CD");
+	gpio_direction_input(GPIO_PH2);
+}
+#endif

board/davinci/da8xxevm/da850evm.c

@@ -108,7 +108,7 @@ static const struct pinmux_config gpio_pins[] = {
 #endif
 };
 
-static const struct pinmux_resource pinmuxes[] = {
+const struct pinmux_resource pinmuxes[] = {
 #ifdef CONFIG_DRIVER_TI_EMAC
 	PINMUX_ITEM(emac_pins_mdio),
 #ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII
@@ -135,6 +135,8 @@ static const struct pinmux_resource pinmuxes[] = {
 	PINMUX_ITEM(gpio_pins),
 };
 
+const int pinmuxes_size = ARRAY_SIZE(pinmuxes);
+
 static const struct lpsc_resource lpsc[] = {
 	{ DAVINCI_LPSC_AEMIF },	/* NAND, NOR */
 	{ DAVINCI_LPSC_SPI1 },	/* Serial Flash */

board/davinci/da8xxevm/u-boot-spl.lds

@@ -0,0 +1,73 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
+		LENGTH = CONFIG_SPL_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+	__start = .;
+	  arch/arm/cpu/arm926ejs/start.o	(.text)
+	  *(.text*)
+	} >.sram
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+	. = ALIGN(4);
+	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+	. = ALIGN(4);
+	.rel.dyn : {
+		__rel_dyn_start = .;
+		*(.rel*)
+		__rel_dyn_end = .;
+	} >.sram
+
+	.dynsym : {
+		__dynsym_start = .;
+		*(.dynsym)
+	} >.sram
+
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start = .;
+		*(.bss*)
+		. = ALIGN(4);
+		__bss_end__ = .;
+	} >.sram
+
+	__image_copy_end = .;
+	_end = .;
+}

board/nvidia/common/Makefile

@@ -0,0 +1,47 @@
+# Copyright (c) 2011 The Chromium OS Authors.
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)board/$(VENDOR)/common)
+endif
+
+LIB	= $(obj)lib$(VENDOR).o
+
+COBJS-y += board.o
+COBJS-$(CONFIG_SPI_UART_SWITCH) += uart-spi-switch.o
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/nvidia/common/board.c

@@ -27,10 +27,12 @@
 #include <asm/arch/tegra2.h>
 #include <asm/arch/sys_proto.h>
 
+#include <asm/arch/board.h>
 #include <asm/arch/clk_rst.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/uart.h>
+#include <spi.h>
 #include "board.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -48,63 +50,22 @@ int timer_init(void)
 	return 0;
 }
 
-static void enable_uart(enum periph_id pid)
-{
-	/* Assert UART reset and enable clock */
-	reset_set_enable(pid, 1);
-	clock_enable(pid);
-	clock_ll_set_source(pid, 0);	/* UARTx_CLK_SRC = 00, PLLP_OUT0 */
-
-	/* wait for 2us */
-	udelay(2);
-
-	/* De-assert reset to UART */
-	reset_set_enable(pid, 0);
-}
-
-/*
- * Routine: clock_init_uart
- * Description: init the PLL and clock for the UART(s)
- */
-static void clock_init_uart(void)
-{
-#if defined(CONFIG_TEGRA2_ENABLE_UARTA)
-	enable_uart(PERIPH_ID_UART1);
-#endif	/* CONFIG_TEGRA2_ENABLE_UARTA */
-#if defined(CONFIG_TEGRA2_ENABLE_UARTD)
-	enable_uart(PERIPH_ID_UART4);
-#endif	/* CONFIG_TEGRA2_ENABLE_UARTD */
-}
-
-/*
- * Routine: pin_mux_uart
- * Description: setup the pin muxes/tristate values for the UART(s)
- */
-static void pin_mux_uart(void)
-{
-#if defined(CONFIG_TEGRA2_ENABLE_UARTA)
-	pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA);
-	pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA);
-
-	pinmux_tristate_disable(PINGRP_IRRX);
-	pinmux_tristate_disable(PINGRP_IRTX);
-#endif	/* CONFIG_TEGRA2_ENABLE_UARTA */
-#if defined(CONFIG_TEGRA2_ENABLE_UARTD)
-	pinmux_set_func(PINGRP_GMC, PMUX_FUNC_UARTD);
-
-	pinmux_tristate_disable(PINGRP_GMC);
-#endif	/* CONFIG_TEGRA2_ENABLE_UARTD */
-}
-
 /*
  * Routine: board_init
  * Description: Early hardware init.
  */
 int board_init(void)
 {
+	/* Do clocks and UART first so that printf() works */
 	clock_init();
 	clock_verify();
 
+#ifdef CONFIG_SPI_UART_SWITCH
+	gpio_config_uart();
+#endif
+#ifdef CONFIG_TEGRA2_SPI
+	spi_init();
+#endif
 	/* boot param addr */
 	gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
 
@@ -114,20 +75,14 @@ int board_init(void)
 #ifdef CONFIG_BOARD_EARLY_INIT_F
 int board_early_init_f(void)
 {
-	/* We didn't do this init in start.S, so do it now */
-	cpu_init_cp15();
-
-	/* Initialize essential common plls */
-	clock_early_init();
-
-	/* Initialize UART clocks */
-	clock_init_uart();
-
-	/* Initialize periph pinmuxes */
-	pin_mux_uart();
+	board_init_uart_f();
 
 	/* Initialize periph GPIOs */
+#ifdef CONFIG_SPI_UART_SWITCH
+	gpio_early_init_uart();
+#else
 	gpio_config_uart();
+#endif
 	return 0;
 }
 #endif	/* EARLY_INIT */

board/nvidia/common/board.h

@@ -25,6 +25,6 @@
 #define _BOARD_H_
 
 void gpio_config_uart(void);
-int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio);
+void gpio_early_init_uart(void);
 
 #endif	/* BOARD_H */

board/nvidia/common/uart-spi-switch.c

@@ -0,0 +1,138 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <asm/gpio.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/uart-spi-switch.h>
+#include <asm/arch/tegra2.h>
+#include <asm/arch/tegra2_spi.h>
+
+
+/* position of the UART/SPI select switch */
+enum spi_uart_switch {
+	SWITCH_UNKNOWN,
+	SWITCH_SPI,
+	SWITCH_UART,
+	SWITCH_BOTH
+};
+
+/* Information about the spi/uart switch */
+struct spi_uart {
+	int gpio;                       /* GPIO to control switch */
+	NS16550_t regs;                 /* Address of UART affected */
+	u32 port;                       /* Port number of UART affected */
+};
+
+static struct spi_uart local;
+static enum spi_uart_switch switch_pos; /* Current switch position */
+
+
+static void get_config(struct spi_uart *config)
+{
+#if defined CONFIG_SPI_CORRUPTS_UART
+	config->gpio = CONFIG_UART_DISABLE_GPIO;
+	config->regs = (NS16550_t)CONFIG_SPI_CORRUPTS_UART;
+	config->port = CONFIG_SPI_CORRUPTS_UART_NR;
+#else
+	config->gpio = -1;
+#endif
+}
+
+/*
+ * Init the UART / SPI switch. This can be called before relocation so we must
+ * not access BSS.
+ */
+void gpio_early_init_uart(void)
+{
+	struct spi_uart config;
+
+	get_config(&config);
+	if (config.gpio != -1) {
+		/* Cannot provide a label prior to relocation */
+		gpio_request(config.gpio, NULL);
+		gpio_direction_output(config.gpio, 0);
+	}
+}
+
+/*
+ * Configure the UART / SPI switch.
+ */
+void gpio_config_uart(void)
+{
+	get_config(&local);
+	if (local.gpio != -1) {
+		gpio_direction_output(local.gpio, 0);
+		switch_pos = SWITCH_UART;
+	} else {
+		/*
+		 * If we're here we don't have a SPI switch; go ahead and
+		 * enable the SPI now.  We didn't in spi_init() so we wouldn't
+		 * kill the UART.
+		 */
+		pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH);
+		switch_pos = SWITCH_BOTH;
+	}
+}
+
+static void spi_uart_switch(struct spi_uart *config,
+			      enum spi_uart_switch new_pos)
+{
+	if (switch_pos == SWITCH_BOTH || new_pos == switch_pos)
+		return;
+
+	/* if the UART was selected, allow it to drain */
+	if (switch_pos == SWITCH_UART)
+		NS16550_drain(config->regs, config->port);
+
+	/* We need to dynamically change the pinmux, shared w/UART RXD/CTS */
+	pinmux_set_func(PINGRP_GMC, new_pos == SWITCH_SPI ?
+				PMUX_FUNC_SFLASH : PMUX_FUNC_UARTD);
+
+	/*
+	* On Seaboard, MOSI/MISO are shared w/UART.
+	* Use GPIO I3 (UART_DISABLE) to tristate UART during SPI activity.
+	* Enable UART later (cs_deactivate) so we can use it for U-Boot comms.
+	*/
+	gpio_direction_output(config->gpio, new_pos == SWITCH_SPI);
+	switch_pos = new_pos;
+
+	/* if the SPI was selected, clear any junk bytes in the UART */
+	if (switch_pos == SWITCH_UART) {
+		/* TODO: What if it is part-way through clocking in junk? */
+		udelay(100);
+		NS16550_clear(config->regs, config->port);
+	}
+}
+
+void pinmux_select_uart(NS16550_t regs)
+{
+	/* Also prevents calling spi_uart_switch() before relocation */
+	if (regs == local.regs)
+		spi_uart_switch(&local, SWITCH_UART);
+}
+
+void pinmux_select_spi(void)
+{
+	spi_uart_switch(&local, SWITCH_SPI);
+}

board/nvidia/harmony/Makefile

@@ -31,7 +31,6 @@ endif
 LIB	= $(obj)lib$(BOARD).o
 
 COBJS	:= $(BOARD).o
-COBJS	+= ../common/board.o
 
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))

board/nvidia/harmony/harmony.c

@@ -25,11 +25,11 @@
 #include <asm/io.h>
 #include <asm/arch/tegra2.h>
 #include <asm/arch/pinmux.h>
+#include <asm/arch/mmc.h>
 #include <asm/gpio.h>
 #ifdef CONFIG_TEGRA2_MMC
 #include <mmc.h>
 #endif
-#include "../common/board.h"
 
 /*
  * Routine: gpio_config_uart

board/nvidia/seaboard/Makefile

@@ -31,7 +31,6 @@ endif
 LIB	= $(obj)lib$(BOARD).o
 
 COBJS	:= $(BOARD).o
-COBJS	+= ../common/board.o
 
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))

board/nvidia/seaboard/seaboard.c

@@ -25,12 +25,14 @@
 #include <asm/io.h>
 #include <asm/arch/tegra2.h>
 #include <asm/arch/pinmux.h>
+#include <asm/arch/mmc.h>
 #include <asm/gpio.h>
 #ifdef CONFIG_TEGRA2_MMC
 #include <mmc.h>
 #endif
-#include "../common/board.h"
 
+/* TODO: Remove this code when the SPI switch is working */
+#ifndef CONFIG_SPI_UART_SWITCH
 /*
  * Routine: gpio_config_uart_seaboard
  * Description: Force GPIO_PI3 low on Seaboard so UART4 works.
@@ -48,6 +50,7 @@ void gpio_config_uart(void)
 		return;
 	gpio_config_uart_seaboard();
 }
+#endif
 
 #ifdef CONFIG_TEGRA2_MMC
 /*

board/nvidia/ventana/Makefile

@@ -25,14 +25,12 @@
 include $(TOPDIR)/config.mk
 
 ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../seaboard)
-$(shell mkdir -p $(obj)../common)
+$(shell mkdir -p $(obj)../common $(obj)../seaboard)
 endif
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	+= ../seaboard/seaboard.o
-COBJS	+= ../common/board.o
+COBJS	= ../seaboard/seaboard.o
 
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))

board/technexion/twister/Makefile

@@ -0,0 +1,38 @@
+#
+# Copyright (C) 2011 Ilya Yanok, Emcraft Systems
+#
+# Based on ti/evm/Makefile
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= $(BOARD).o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend

board/technexion/twister/twister.c

@@ -0,0 +1,116 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <i2c.h>
+#include <asm/gpio.h>
+#include "twister.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Timing definitions for Ethernet Controller */
+static const u32 gpmc_smc911[] = {
+	NET_GPMC_CONFIG1,
+	NET_GPMC_CONFIG2,
+	NET_GPMC_CONFIG3,
+	NET_GPMC_CONFIG4,
+	NET_GPMC_CONFIG5,
+	NET_GPMC_CONFIG6,
+};
+
+static const u32 gpmc_XR16L2751[] = {
+	XR16L2751_GPMC_CONFIG1,
+	XR16L2751_GPMC_CONFIG2,
+	XR16L2751_GPMC_CONFIG3,
+	XR16L2751_GPMC_CONFIG4,
+	XR16L2751_GPMC_CONFIG5,
+	XR16L2751_GPMC_CONFIG6,
+};
+
+int board_init(void)
+{
+	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+
+	/* boot param addr */
+	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+	/* Chip select 1  and 3 are used for XR16L2751 UART controller */
+	enable_gpmc_cs_config(gpmc_XR16L2751, &gpmc_cfg->cs[1],
+		XR16L2751_UART1_BASE, GPMC_SIZE_16M);
+
+	enable_gpmc_cs_config(gpmc_XR16L2751, &gpmc_cfg->cs[3],
+		XR16L2751_UART2_BASE, GPMC_SIZE_16M);
+
+	gpio_request(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO, "USB_PHY1_RESET");
+	gpio_direction_output(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO, 1);
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	dieid_num_r();
+
+	return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *		hardware. Many pins need to be moved from protect to primary
+ *		mode.
+ */
+void set_muxconf_regs(void)
+{
+	MUX_TWISTER();
+}
+
+int board_eth_init(bd_t *bis)
+{
+	davinci_emac_initialize();
+
+	/* init cs for extern lan */
+	enable_gpmc_cs_config(gpmc_smc911, &gpmc_cfg->cs[5],
+		CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
+	if (smc911x_initialize(0, CONFIG_SMC911X_BASE) <= 0)
+		printf("\nError initializing SMC911x controlleri\n");
+
+	return 0;
+}
+
+#if defined(CONFIG_OMAP_HSMMC) && \
+	!defined(CONFIG_SPL_BUILD)
+int board_mmc_init(bd_t *bis)
+{
+	return omap_mmc_init(0);
+}
+#endif

board/technexion/twister/twister.h

@@ -0,0 +1,411 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * Copyright (C) 2010 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#ifndef _TAM3517_H_
+#define _TAM3517_H_
+
+const omap3_sysinfo sysinfo = {
+	DDR_DISCRETE,
+	"TAM3517 TWISTER Board",
+	"NAND",
+};
+
+#define XR16L2751_GPMC_CONFIG1	0x00000000
+#define XR16L2751_GPMC_CONFIG2	0x001e1e01
+#define XR16L2751_GPMC_CONFIG3	0x00080300
+#define XR16L2751_GPMC_CONFIG4	0x1c091c09
+#define XR16L2751_GPMC_CONFIG5	0x04181f1f
+#define XR16L2751_GPMC_CONFIG6	0x00000FCF
+
+#define XR16L2751_UART1_BASE	0x21000000
+#define XR16L2751_UART2_BASE	0x23000000
+
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN	- Pull type selection is active
+ * M0	- Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_TWISTER() \
+	/* SDRC */\
+	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS0N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS1N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS2N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS3N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_CKE0),		(M0)) \
+	MUX_VAL(CP(SDRC_CKE1),		(M0)) \
+	MUX_VAL(CP(STRBEN_DLY0),	(IEN  | PTD | EN  | M0)) \
+			 /*sdrc_strben_dly0*/\
+	MUX_VAL(CP(STRBEN_DLY1),	(IEN  | PTD | EN  | M0)) \
+			/*sdrc_strben_dly1*/\
+	/* GPMC */\
+	MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS1),		(IEN | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTD | EN  | M2)) /*PWM9*/\
+	MUX_VAL(CP(GPMC_NCS3),		(IEN | PTU | EN | M0)) \
+	MUX_VAL(CP(GPMC_NCS4),		(IEN | PTD | EN | M4)) \
+	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS6),		(IDIS  | PTD | EN | M3)) /*PWM11*/ \
+	MUX_VAL(CP(GPMC_NCS7),		(IDIS  | PTD | EN | M4)) /*GPIO_58*/ \
+	MUX_VAL(CP(GPMC_CLK),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M4)) /*GPIO_64*/\
+	MUX_VAL(CP(GPMC_WAIT3),		(IEN  | PTU | EN  | M4)) \
+	/* DSS */\
+	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) \
+	/* CAMERA */\
+	MUX_VAL(CP(CAM_HS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*GPIO_98*/\
+	MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M4)) /*GPIO_167*/\
+	MUX_VAL(CP(CAM_STROBE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M0)) \
+	/* MMC */\
+	MUX_VAL(CP(MMC1_CLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M4)) \
+			/* CardDetect */\
+	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M4)) \
+	\
+	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN | M0)) \
+	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | DIS  | M0)) \
+	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | DIS  | M0)) \
+	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | DIS  | M0)) \
+	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | DIS  | M0)) \
+	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | DIS  | M0)) \
+	MUX_VAL(CP(MMC2_DAT4),		(IDIS  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC2_DAT5),		(IDIS  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC2_DAT6),		(IDIS  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC2_DAT7),		(IDIS  | PTU | EN  | M4)) \
+	/* McBSP */\
+	MUX_VAL(CP(MCBSP_CLKS),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_CLKR),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_FSR),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(MCBSP1_DX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_DR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_FSX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(MCBSP2_FSX),		(IEN | PTD | EN | M4)) /*GPIO_116*/ \
+	MUX_VAL(CP(MCBSP2_CLKX),	(IEN | PTD | EN | M4)) \
+	MUX_VAL(CP(MCBSP2_DR),		(IEN | PTD | EN | M4)) \
+	MUX_VAL(CP(MCBSP2_DX),		(IEN | PTD | EN | M4)) \
+	\
+	MUX_VAL(CP(MCBSP3_DX),		(IEN | PTU | EN | M4)) \
+	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTU | EN | M4)) \
+	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTU | EN | M4)) \
+	MUX_VAL(CP(MCBSP3_FSX),		(IEN  | PTU | EN | M4)) \
+	\
+	MUX_VAL(CP(MCBSP4_CLKX),	(IEN | PTD | DIS | M4)) /*GPIO_152*/\
+	MUX_VAL(CP(MCBSP4_DR),		(IDIS | PTD | DIS | M4)) /*GPIO_153*/\
+	MUX_VAL(CP(MCBSP4_DX),		(IDIS | PTD | DIS | M4)) /*GPIO_154*/\
+	MUX_VAL(CP(MCBSP4_FSX),		(IEN | PTD | DIS | M4)) /*GPIO_155*/\
+	/* UART */\
+	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART1_RTS),		(IEN | PTU | EN | M4)) \
+	MUX_VAL(CP(UART1_CTS),		(IEN | PTU | EN | M4)) \
+	\
+	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(UART3_CTS_RCTX),	(IDIS  | PTD | DIS | M4)) /*GPIO_163*/ \
+	MUX_VAL(CP(UART3_RTS_SD),	(IEN | PTD | DIS | M4)) /*GPIO_164*/\
+	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) \
+	/* I2C */\
+	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) \
+	/* McSPI */\
+	MUX_VAL(CP(MCSPI1_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_CS0),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(MCSPI1_CS1),		(IEN | PTD | EN | M4)) /*GPIO_175*/\
+	MUX_VAL(CP(MCSPI1_CS2),		(IEN | PTD | EN | M4)) /*GPIO_176*/\
+	MUX_VAL(CP(MCSPI1_CS3),		(IEN | PTD | EN | M4)) \
+	\
+	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | EN  | M4)) \
+	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTD | EN  | M4)) \
+	/* CCDC */\
+	MUX_VAL(CP(CCDC_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_FIELD),		(IEN  | PTD | DIS | M1)) \
+	MUX_VAL(CP(CCDC_HD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_VD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_WEN),		(IEN  | PTD | DIS | M1)) \
+	MUX_VAL(CP(CCDC_DATA0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA7),		(IEN  | PTD | DIS | M0)) \
+	/* RMII */\
+	MUX_VAL(CP(RMII_MDIO_DATA),	(IEN  |  M0)) \
+	MUX_VAL(CP(RMII_MDIO_CLK),	(M0)) \
+	MUX_VAL(CP(RMII_RXD0)	,	(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_RXD1),		(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_CRS_DV),	(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_RXER),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXD0),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXD1),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXEN),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_50MHZ_CLK),	(IEN  | PTD | EN  | M0)) \
+	/* HECC */\
+	MUX_VAL(CP(HECC1_TXD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(HECC1_RXD),		(IEN  | PTU | EN  | M0)) \
+	/* HSUSB */\
+	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_STP),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(USB0_DRVBUS),	(IEN  | PTD | EN  | M0)) \
+	/* HDQ */\
+	MUX_VAL(CP(HDQ_SIO),		(IEN | PTD | EN | M4)) \
+	/* Control and debug */\
+	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(SYS_NRESWARM),	(IDIS | PTU | DIS | M4)) \
+			/* - GPIO30 */\
+	MUX_VAL(CP(SYS_BOOT0),		(IEN  | PTD | DIS | M4)) /*GPIO_2*/\
+	MUX_VAL(CP(SYS_BOOT1),		(IEN  | PTD | DIS | M4)) /*GPIO_3 */\
+	MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) /*GPIO_4*/\
+	MUX_VAL(CP(SYS_BOOT3),		(IEN  | PTD | DIS | M4)) /*GPIO_5*/\
+	MUX_VAL(CP(SYS_BOOT4),		(IEN  | PTD | DIS | M4)) /*GPIO_6*/\
+	MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /*GPIO_7*/\
+	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M4)) /*GPIO_8*/\
+							 /* - VIO_1V8*/\
+	MUX_VAL(CP(SYS_BOOT7),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SYS_BOOT8),		(IEN  | PTD | EN  | M0)) \
+	\
+	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M0)) \
+	/* JTAG */\
+	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TMS),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TDI),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_EMU0),		(IDIS  | PTD | EN | M4)) /*GPIO_11*/ \
+	MUX_VAL(CP(JTAG_EMU1),		(IDIS  | PTD | EN | M4)) /*GPIO_31*/ \
+	/* ETK (ES2 onwards) */\
+	MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTD | DIS  | M3)) \
+					/* hsusb1_stp */ \
+	MUX_VAL(CP(ETK_CTL_ES2),	(IDIS | PTD | DIS | M3)) \
+					/* hsusb1_clk */\
+	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTD | EN  | M3)) \
+					/* hsusb1_dir */\
+	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTD | EN  | M3)) \
+					/* hsusb1_nxt */\
+	MUX_VAL(CP(ETK_D10_ES2),	(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTD | DIS | M4)) \
+	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | EN  | M4)) \
+	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | DIS | M4)) \
+	/* Die to Die */\
+	MUX_VAL(CP(D2D_MCAD34),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_MCAD35),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_MCAD36),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SPINT),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_FRINT),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTDI),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTDO),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTMS),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTCK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MSTDBY),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_MWRITE),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SWRITE),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MREAD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SREAD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) \
+
+#endif

board/timll/devkit8000/devkit8000.c

@@ -48,6 +48,16 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static u32 gpmc_net_config[GPMC_MAX_REG] = {
+	NET_GPMC_CONFIG1,
+	NET_GPMC_CONFIG2,
+	NET_GPMC_CONFIG3,
+	NET_GPMC_CONFIG4,
+	NET_GPMC_CONFIG5,
+	NET_GPMC_CONFIG6,
+	0
+};
+
 /*
  * Routine: board_init
  * Description: Early hardware init.
@@ -82,13 +92,8 @@ int misc_init_r(void)
 
 #ifdef CONFIG_DRIVER_DM9000
 	/* Configure GPMC registers for DM9000 */
-	writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[6].config1);
-	writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[6].config2);
-	writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[6].config3);
-	writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[6].config4);
-	writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[6].config5);
-	writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[6].config6);
-	writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[6].config7);
+	enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[6],
+			CONFIG_DM9000_BASE, GPMC_SIZE_16M);
 
 	/* Use OMAP DIE_ID as MAC address */
 	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {

board/ttcontrol/vision2/vision2.c

@@ -428,9 +428,8 @@ static void setup_gpios(void)
 	gpio_direction_output(4, 1);
 
 	gpio_direction_output(7, 0);
-	for (i = 65; i < 71; i++) {
+	for (i = 65; i < 71; i++)
 		gpio_direction_output(i, 0);
-	}
 
 	gpio_direction_output(94, 0);
 

boards.cfg

@@ -210,6 +210,7 @@ omap3_evm_quick_mmc          arm         armv7       evm                 ti
 omap3_evm_quick_nand         arm         armv7       evm                 ti             omap3
 omap3_sdp3430                arm         armv7       sdp3430             ti             omap3
 devkit8000                   arm         armv7       devkit8000          timll          omap3
+twister                      arm         armv7       twister             technexion     omap3
 omap4_panda                  arm         armv7       panda               ti             omap4
 omap4_sdp4430                arm         armv7       sdp4430             ti             omap4
 omap5_evm                    arm         armv7       omap5_evm           ti		omap5
@@ -244,6 +245,8 @@ xaeniax                      arm         pxa
 zipitz2                      arm         pxa
 colibri_pxa270               arm         pxa         -                   toradex
 jornada                      arm         sa1100
+plutux                       arm         armv7       plutux              avionic-design tegra2
+medcom                       arm         armv7       medcom              avionic-design tegra2
 atngw100                     avr32       at32ap      -                   atmel          at32ap700x
 atstk1002                    avr32       at32ap      atstk1000           atmel          at32ap700x
 atstk1003                    avr32       at32ap      atstk1000           atmel          at32ap700x

doc/README.SPL

@@ -65,3 +65,4 @@ CONFIG_SPL_NAND_SUPPORT (drivers/mtd/nand/libnand.o)
 CONFIG_SPL_DMA_SUPPORT (drivers/dma/libdma.o)
 CONFIG_SPL_POST_MEM_SUPPORT (post/drivers/memory.o)
 CONFIG_SPL_NAND_LOAD (drivers/mtd/nand/nand_spl_load.o)
+CONFIG_SPL_SPI_LOAD (drivers/mtd/spi/spi_spl_load.o)

doc/README.davinci

@@ -95,6 +95,15 @@ into the RAM.
 The programmers and UBL are always released as part of any standard TI
 software release associated with an SOC.
 
+Alternative boot method (DA850 EVM only):
+For the DA850 EVM an SPL (secondary program loader, see doc/README.SPL)
+is provided to load U-Boot directly from SPI flash. In this case, the
+SPL does the low level initialization that is otherwise done by the SPL.
+To build U-Boot with this SPL, do
+make da850evm_config
+make u-boot.ais
+and program the resulting u-boot.ais file to the SPI flash of the DA850 EVM.
+
 Environment Variables
 =====================
 

drivers/mmc/tegra2_mmc.h

@@ -127,7 +127,5 @@ struct mmc_host {
 	int cd_gpio;		/* Change Detect GPIO */
 };
 
-int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio);
-
 #endif	/* __ASSEMBLY__ */
 #endif	/* __TEGRA2_MMC_H_ */

drivers/mtd/spi/Makefile

@@ -25,6 +25,10 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libspi_flash.o
 
+ifdef CONFIG_SPL_BUILD
+COBJS-$(CONFIG_SPL_SPI_LOAD)	+= spi_spl_load.o
+endif
+
 COBJS-$(CONFIG_SPI_FLASH)	+= spi_flash.o
 COBJS-$(CONFIG_SPI_FLASH_ATMEL)	+= atmel.o
 COBJS-$(CONFIG_SPI_FLASH_EON)	+= eon.o

drivers/mtd/spi/spi_spl_load.c

@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2011 OMICRON electronics GmbH
+ *
+ * based on drivers/mtd/nand/nand_spl_load.c
+ *
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <spi_flash.h>
+
+/*
+ * The main entry for SPI booting. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-Boot image
+ * from SPI into SDRAM and starts it from there.
+ */
+void spi_boot(void)
+{
+	struct spi_flash *flash;
+	void (*uboot)(void) __noreturn;
+
+	/*
+	 * Load U-Boot image from SPI flash into RAM
+	 */
+
+	flash = spi_flash_probe(CONFIG_SPL_SPI_BUS, CONFIG_SPL_SPI_CS,
+				CONFIG_SF_DEFAULT_SPEED, SPI_MODE_3);
+	if (!flash) {
+		puts("failed.\n");
+		hang();
+	}
+
+	spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS,
+		       CONFIG_SYS_SPI_U_BOOT_SIZE,
+		       (void *) CONFIG_SYS_TEXT_BASE);
+
+	/*
+	 * Jump to U-Boot image
+	 */
+	uboot = (void *) CONFIG_SYS_TEXT_BASE;
+	(*uboot)();
+}

drivers/spi/Makefile

@@ -43,6 +43,7 @@ COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o
 COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
 COBJS-$(CONFIG_SH_SPI) += sh_spi.o
 COBJS-$(CONFIG_FSL_ESPI) += fsl_espi.o
+COBJS-$(CONFIG_TEGRA2_SPI) += tegra2_spi.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)

drivers/spi/tegra2_spi.c

@@ -0,0 +1,279 @@
+/*
+ * Copyright (c) 2010-2011 NVIDIA Corporation
+ * With help from the mpc8xxx SPI driver
+ * With more help from omap3_spi SPI driver
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include <malloc.h>
+#include <spi.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <ns16550.h>
+#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/uart-spi-switch.h>
+#include <asm/arch/tegra2_spi.h>
+
+struct tegra_spi_slave {
+	struct spi_slave slave;
+	struct spi_tegra *regs;
+	unsigned int freq;
+	unsigned int mode;
+};
+
+static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave)
+{
+	return container_of(slave, struct tegra_spi_slave, slave);
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	/* Tegra2 SPI-Flash - only 1 device ('bus/cs') */
+	if (bus != 0 || cs != 0)
+		return 0;
+	else
+		return 1;
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+		unsigned int max_hz, unsigned int mode)
+{
+	struct tegra_spi_slave *spi;
+
+	if (!spi_cs_is_valid(bus, cs)) {
+		printf("SPI error: unsupported bus %d / chip select %d\n",
+		       bus, cs);
+		return NULL;
+	}
+
+	if (max_hz > TEGRA2_SPI_MAX_FREQ) {
+		printf("SPI error: unsupported frequency %d Hz. Max frequency"
+			" is %d Hz\n", max_hz, TEGRA2_SPI_MAX_FREQ);
+		return NULL;
+	}
+
+	spi = malloc(sizeof(struct tegra_spi_slave));
+	if (!spi) {
+		printf("SPI error: malloc of SPI structure failed\n");
+		return NULL;
+	}
+	spi->slave.bus = bus;
+	spi->slave.cs = cs;
+	spi->freq = max_hz;
+	spi->regs = (struct spi_tegra *)TEGRA2_SPI_BASE;
+	spi->mode = mode;
+
+	return &spi->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+	struct tegra_spi_slave *spi = to_tegra_spi(slave);
+
+	free(spi);
+}
+
+void spi_init(void)
+{
+	/* do nothing */
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+	struct tegra_spi_slave *spi = to_tegra_spi(slave);
+	struct spi_tegra *regs = spi->regs;
+	u32 reg;
+
+	/* Change SPI clock to correct frequency, PLLP_OUT0 source */
+	clock_start_periph_pll(PERIPH_ID_SPI1, CLOCK_ID_PERIPH, spi->freq);
+
+	/* Clear stale status here */
+	reg = SPI_STAT_RDY | SPI_STAT_RXF_FLUSH | SPI_STAT_TXF_FLUSH | \
+		SPI_STAT_RXF_UNR | SPI_STAT_TXF_OVF;
+	writel(reg, &regs->status);
+	debug("spi_init: STATUS = %08x\n", readl(&regs->status));
+
+	/*
+	 * Use sw-controlled CS, so we can clock in data after ReadID, etc.
+	 */
+	reg = (spi->mode & 1) << SPI_CMD_ACTIVE_SDA_SHIFT;
+	if (spi->mode & 2)
+		reg |= 1 << SPI_CMD_ACTIVE_SCLK_SHIFT;
+	clrsetbits_le32(&regs->command, SPI_CMD_ACTIVE_SCLK_MASK |
+		SPI_CMD_ACTIVE_SDA_MASK, SPI_CMD_CS_SOFT | reg);
+	debug("spi_init: COMMAND = %08x\n", readl(&regs->command));
+
+	/*
+	 * SPI pins on Tegra2 are muxed - change pinmux later due to UART
+	 * issue.
+	 */
+	pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH);
+	pinmux_tristate_disable(PINGRP_LSPI);
+
+#ifndef CONFIG_SPI_UART_SWITCH
+	/*
+	 * NOTE:
+	 * Only set PinMux bits 3:2 to SPI here on boards that don't have the
+	 * SPI UART switch or subsequent UART data won't go out!  See
+	 * spi_uart_switch().
+	 */
+	/* TODO: pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH); */
+#endif
+	return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+	/*
+	 * We can't release UART_DISABLE and set pinmux to UART4 here since
+	 * some code (e,g, spi_flash_probe) uses printf() while the SPI
+	 * bus is held. That is arguably bad, but it has the advantage of
+	 * already being in the source tree.
+	 */
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+	struct tegra_spi_slave *spi = to_tegra_spi(slave);
+
+	pinmux_select_spi();
+
+	/* CS is negated on Tegra, so drive a 1 to get a 0 */
+	setbits_le32(&spi->regs->command, SPI_CMD_CS_VAL);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	struct tegra_spi_slave *spi = to_tegra_spi(slave);
+
+	/* CS is negated on Tegra, so drive a 0 to get a 1 */
+	clrbits_le32(&spi->regs->command, SPI_CMD_CS_VAL);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+		const void *data_out, void *data_in, unsigned long flags)
+{
+	struct tegra_spi_slave *spi = to_tegra_spi(slave);
+	struct spi_tegra *regs = spi->regs;
+	u32 reg, tmpdout, tmpdin = 0;
+	const u8 *dout = data_out;
+	u8 *din = data_in;
+	int num_bytes;
+	int ret;
+
+	debug("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n",
+	      slave->bus, slave->cs, *(u8 *)dout, *(u8 *)din, bitlen);
+	if (bitlen % 8)
+		return -1;
+	num_bytes = bitlen / 8;
+
+	ret = 0;
+
+	reg = readl(&regs->status);
+	writel(reg, &regs->status);	/* Clear all SPI events via R/W */
+	debug("spi_xfer entry: STATUS = %08x\n", reg);
+
+	reg = readl(&regs->command);
+	reg |= SPI_CMD_TXEN | SPI_CMD_RXEN;
+	writel(reg, &regs->command);
+	debug("spi_xfer: COMMAND = %08x\n", readl(&regs->command));
+
+	if (flags & SPI_XFER_BEGIN)
+		spi_cs_activate(slave);
+
+	/* handle data in 32-bit chunks */
+	while (num_bytes > 0) {
+		int bytes;
+		int is_read = 0;
+		int tm, i;
+
+		tmpdout = 0;
+		bytes = (num_bytes > 4) ?  4 : num_bytes;
+
+		if (dout != NULL) {
+			for (i = 0; i < bytes; ++i)
+				tmpdout = (tmpdout << 8) | dout[i];
+		}
+
+		num_bytes -= bytes;
+		if (dout)
+			dout += bytes;
+
+		clrsetbits_le32(&regs->command, SPI_CMD_BIT_LENGTH_MASK,
+				bytes * 8 - 1);
+		writel(tmpdout, &regs->tx_fifo);
+		setbits_le32(&regs->command, SPI_CMD_GO);
+
+		/*
+		 * Wait for SPI transmit FIFO to empty, or to time out.
+		 * The RX FIFO status will be read and cleared last
+		 */
+		for (tm = 0, is_read = 0; tm < SPI_TIMEOUT; ++tm) {
+			u32 status;
+
+			status = readl(&regs->status);
+
+			/* We can exit when we've had both RX and TX activity */
+			if (is_read && (status & SPI_STAT_TXF_EMPTY))
+				break;
+
+			if ((status & (SPI_STAT_BSY | SPI_STAT_RDY)) !=
+					SPI_STAT_RDY)
+				tm++;
+
+			else if (!(status & SPI_STAT_RXF_EMPTY)) {
+				tmpdin = readl(&regs->rx_fifo);
+				is_read = 1;
+
+				/* swap bytes read in */
+				if (din != NULL) {
+					for (i = bytes - 1; i >= 0; --i) {
+						din[i] = tmpdin & 0xff;
+						tmpdin >>= 8;
+					}
+					din += bytes;
+				}
+			}
+		}
+
+		if (tm >= SPI_TIMEOUT)
+			ret = tm;
+
+		/* clear ACK RDY, etc. bits */
+		writel(readl(&regs->status), &regs->status);
+	}
+
+	if (flags & SPI_XFER_END)
+		spi_cs_deactivate(slave);
+
+	debug("spi_xfer: transfer ended. Value=%08x, status = %08x\n",
+		tmpdin, readl(&regs->status));
+
+	if (ret) {
+		printf("spi_xfer: timeout during SPI transfer, tm %d\n", ret);
+		return -1;
+	}
+
+	return 0;
+}

include/configs/da850evm.h

@@ -65,6 +65,75 @@
 #define CONFIG_NR_DRAM_BANKS	1 /* we have 1 bank of DRAM */
 #define CONFIG_STACKSIZE	(256*1024) /* regular stack */
 
+#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (	\
+	DAVINCI_SYSCFG_SUSPSRC_TIMER0 |		\
+	DAVINCI_SYSCFG_SUSPSRC_SPI1 |		\
+	DAVINCI_SYSCFG_SUSPSRC_UART2 |		\
+	DAVINCI_SYSCFG_SUSPSRC_EMAC |		\
+	DAVINCI_SYSCFG_SUSPSRC_I2C)
+
+/*
+ * PLL configuration
+ */
+#define CONFIG_SYS_DV_CLKMODE          0
+#define CONFIG_SYS_DA850_PLL0_POSTDIV  1
+#define CONFIG_SYS_DA850_PLL0_PLLDIV1  0x8000
+#define CONFIG_SYS_DA850_PLL0_PLLDIV2  0x8001
+#define CONFIG_SYS_DA850_PLL0_PLLDIV3  0x8002
+#define CONFIG_SYS_DA850_PLL0_PLLDIV4  0x8003
+#define CONFIG_SYS_DA850_PLL0_PLLDIV5  0x8002
+#define CONFIG_SYS_DA850_PLL0_PLLDIV6  CONFIG_SYS_DA850_PLL0_PLLDIV1
+#define CONFIG_SYS_DA850_PLL0_PLLDIV7  0x8005
+
+#define CONFIG_SYS_DA850_PLL1_POSTDIV  1
+#define CONFIG_SYS_DA850_PLL1_PLLDIV1  0x8000
+#define CONFIG_SYS_DA850_PLL1_PLLDIV2  0x8001
+#define CONFIG_SYS_DA850_PLL1_PLLDIV3  0x8002
+
+#define CONFIG_SYS_DA850_PLL0_PLLM     24
+#define CONFIG_SYS_DA850_PLL1_PLLM     21
+
+/*
+ * DDR2 memory configuration
+ */
+#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
+					DV_DDR_PHY_EXT_STRBEN | \
+					(0x4 << DV_DDR_PHY_RD_LATENCY_SHIFT))
+
+#define CONFIG_SYS_DA850_DDR2_SDBCR (		\
+	(1 << DV_DDR_SDCR_MSDRAMEN_SHIFT) |	\
+	(1 << DV_DDR_SDCR_DDREN_SHIFT) |	\
+	(1 << DV_DDR_SDCR_SDRAMEN_SHIFT) |	\
+	(1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) |	\
+	(0x3 << DV_DDR_SDCR_CL_SHIFT) |		\
+	(0x2 << DV_DDR_SDCR_IBANK_SHIFT) |	\
+	(0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
+
+/* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */
+#define CONFIG_SYS_DA850_DDR2_SDBCR2 0
+
+#define CONFIG_SYS_DA850_DDR2_SDTIMR (		\
+	(14 << DV_DDR_SDTMR1_RFC_SHIFT) |	\
+	(2 << DV_DDR_SDTMR1_RP_SHIFT) |		\
+	(2 << DV_DDR_SDTMR1_RCD_SHIFT) |	\
+	(1 << DV_DDR_SDTMR1_WR_SHIFT) |		\
+	(5 << DV_DDR_SDTMR1_RAS_SHIFT) |	\
+	(8 << DV_DDR_SDTMR1_RC_SHIFT) |		\
+	(1 << DV_DDR_SDTMR1_RRD_SHIFT) |	\
+	(0 << DV_DDR_SDTMR1_WTR_SHIFT))
+
+#define CONFIG_SYS_DA850_DDR2_SDTIMR2 (		\
+	(7 << DV_DDR_SDTMR2_RASMAX_SHIFT) |	\
+	(0 << DV_DDR_SDTMR2_XP_SHIFT) |		\
+	(0 << DV_DDR_SDTMR2_ODT_SHIFT) |	\
+	(17 << DV_DDR_SDTMR2_XSNR_SHIFT) |	\
+	(199 << DV_DDR_SDTMR2_XSRD_SHIFT) |	\
+	(0 << DV_DDR_SDTMR2_RTP_SHIFT) |	\
+	(0 << DV_DDR_SDTMR2_CKE_SHIFT))
+
+#define CONFIG_SYS_DA850_DDR2_SDRCR    0x00000494
+#define CONFIG_SYS_DA850_DDR2_PBBPR    0x30
+
 /*
  * Serial Driver info
  */
@@ -76,6 +145,7 @@
 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_DA850_LPSC_UART DAVINCI_LPSC_UART2
 
 #define CONFIG_SPI
 #define CONFIG_SPI_FLASH
@@ -242,6 +312,23 @@
 #undef CONFIG_CMD_ENV
 #endif
 
+/* defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS 0
+#define CONFIG_SPL_SPI_CS 0
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_LDSCRIPT	"$(BOARDDIR)/u-boot-spl.lds"
+#define CONFIG_SPL_STACK	0x8001ff00
+#define CONFIG_SPL_TEXT_BASE	0x80000000
+#define CONFIG_SPL_MAX_SIZE	32768
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000
+#define CONFIG_SYS_SPI_U_BOOT_SIZE	0x30000
+
 /* additions for new relocation code, must added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		0xc0000000
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \

include/configs/harmony.h

@@ -58,4 +58,7 @@
 #define CONFIG_EFI_PARTITION
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
+
+/* Environment not stored */
+#define CONFIG_ENV_IS_NOWHERE
 #endif /* __CONFIG_H */

include/configs/medcom.h

@@ -0,0 +1,64 @@
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ *  (C) Copyright 2011
+ *  Avionic Design GmbH <www.avionic-design.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tegra2-common.h"
+
+/* High-level configuration options */
+#define TEGRA2_SYSMEM			"mem=384M@0M nvmem=128M@384M"
+#define V_PROMPT			"Tegra2 (Medcom) # "
+#define CONFIG_TEGRA2_BOARD_STRING	"Avionic Design Medcom"
+#define CONFIG_SYS_BOARD_ODMDATA	0x2b0d8011
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA2_ENABLE_UARTD	/* UARTD: debug UART */
+#define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_ENV_IS_NOWHERE
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA2_MMC
+#define CONFIG_CMD_MMC
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+#define CONFIG_FIT
+
+#define CONFIG_BOOTCOMMAND				\
+	"mmc rescan;"					\
+	"ext2load mmc 0 0x17000000 /boot/uImage;"	\
+	"bootm"
+
+#endif /* __CONFIG_H */

include/configs/plutux.h

@@ -0,0 +1,64 @@
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ *  (C) Copyright 2011
+ *  Avionic Design GmbH <www.avionic-design.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tegra2-common.h"
+
+/* High-level configuration options */
+#define TEGRA2_SYSMEM			"mem=384M@0M nvmem=128M@384M"
+#define V_PROMPT			"Tegra2 (Plutux) # "
+#define CONFIG_TEGRA2_BOARD_STRING	"Avionic Design Plutux"
+#define CONFIG_SYS_BOARD_ODMDATA	0x2b2d8011
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA2_ENABLE_UARTD	/* UARTD: debug UART */
+#define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_ENV_IS_NOWHERE
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA2_MMC
+#define CONFIG_CMD_MMC
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+#define CONFIG_FIT
+
+#define CONFIG_BOOTCOMMAND				\
+	"mmc rescan;"					\
+	"ext2load mmc 0 0x17000000 /boot/uImage;"	\
+	"bootm"
+
+#endif /* __CONFIG_H */

include/configs/seaboard.h

@@ -37,11 +37,23 @@
 #define CONFIG_TEGRA2_ENABLE_UARTD
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE
 
+/* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */
+#define CONFIG_UART_DISABLE_GPIO	GPIO_PI3
+
 #define CONFIG_MACH_TYPE		MACH_TYPE_SEABOARD
 #define CONFIG_SYS_BOARD_ODMDATA	0x300d8011 /* lp1, 1GB */
 
 #define CONFIG_BOARD_EARLY_INIT_F
 
+/* SPI */
+#define CONFIG_TEGRA2_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_SIZE		(4 << 20)
+
 /* SD/MMC */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
@@ -52,4 +64,12 @@
 #define CONFIG_EFI_PARTITION
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
+
+/* Environment in SPI */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_MAX_HZ		48000000
+#define CONFIG_ENV_SPI_MODE		SPI_MODE_0
+
+#define CONFIG_ENV_SECT_SIZE    CONFIG_ENV_SIZE
+#define CONFIG_ENV_OFFSET       (CONFIG_SPI_FLASH_SIZE - CONFIG_ENV_SECT_SIZE)
 #endif /* __CONFIG_H */

include/configs/tam3517-common.h

@@ -0,0 +1,361 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#ifndef __TAM3517_H
+#define __TAM3517_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_OMAP		/* in a TI OMAP core */
+#define CONFIG_OMAP34XX		/* which is a 34XX */
+
+#define CONFIG_SYS_TEXT_BASE 0x80008000
+
+#define CONFIG_SYS_CACHELINE_SIZE	64
+
+#define CONFIG_EMIF4	/* The chip has EMIF4 controller */
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Clock Defines */
+#define V_OSCK			26000000	/* Clock output from T2 */
+#define V_SCLK			(V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ				/* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB sector */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10) + \
+					2 * 1024 * 1024)
+/*
+ * DDR related
+ */
+#define CONFIG_OMAP3_MICRON_DDR		/* Micron DDR */
+#define CONFIG_SYS_CS0_SIZE		(256 * 1024 * 1024)
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		48000000	/* 48MHz (APLL96/2) */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SYS_NS16550_COM1		OMAP34XX_UART1
+#define CONFIG_SERIAL1			/* UART1 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
+					115200}
+#define CONFIG_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_DOS_PARTITION
+
+/* EHCI */
+#define CONFIG_OMAP3_GPIO_5
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	25
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+#define CONFIG_USB_STORAGE
+
+/* #define CONFIG_EHCI_DCACHE */
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
+#define CONFIG_CMD_FAT		/* FAT support			*/
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC		/* MMC support			*/
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_NAND		/* NAND support			*/
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+
+#undef CONFIG_CMD_FLASH		/* only NAND on the SOM */
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED		400000
+#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C_BUS		0
+#define CONFIG_SYS_I2C_BUS_SELECT	1
+#define CONFIG_DRIVER_OMAP34XX_I2C
+
+
+/*
+ * Board NAND Info.
+ */
+#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
+							/* to access */
+							/* nand at CS0 */
+
+#define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
+							/* NAND devices */
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+
+#define CONFIG_AUTO_COMPLETE
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		32	/* max number of command */
+						/* args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
+#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
+					0x01F00000) /* 31MB */
+
+#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0) /* default load */
+								/* address */
+
+/*
+ * AM3517 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
+#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ			1000
+
+/*
+ * Stack sizes
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
+#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 MiB */
+#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
+
+/*
+ * FLASH and environment organization
+ */
+
+/* **** PISMO SUPPORT *** */
+
+/* Configure the PISMO */
+#define PISMO1_NAND_SIZE		GPMC_SIZE_128M
+
+#define CONFIG_NAND_OMAP_GPMC
+#define GPMC_NAND_ECC_LP_x16_LAYOUT
+#define CONFIG_ENV_IS_IN_NAND
+#define SMNAND_ENV_OFFSET		0x180000 /* environment starts here */
+
+/* Redundant Environment */
+#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
+#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
+#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + \
+						2 * CONFIG_SYS_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
+
+/*
+ * ethernet support, EMAC
+ *
+ */
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_DRIVER_TI_EMAC_USE_RMII
+#define CONFIG_MII
+#define CONFIG_EMAC_MDIO_PHY_NUM	0
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 10
+#define CONFIG_NET_MULTI
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_CONSOLE
+#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_NAND_SOFTECC
+#define CONFIG_SPL_NAND_WORKSPACE	0x8f07f000 /* below BSS */
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+#define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
+#define CONFIG_SPL_MAX_SIZE		(45 << 10)	/* 45 K */
+#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+
+#define CONFIG_SYS_SPL_MALLOC_START	0x8f000000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
+#define CONFIG_SPL_BSS_START_ADDR	0x8f080000 /* end of RAM */
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+
+/* NAND boot config */
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
+#define CONFIG_SYS_NAND_ECCPOS		{40, 41, 42, 43, 44, 45, 46, 47,\
+					 48, 49, 50, 51, 52, 53, 54, 55,\
+					 56, 57, 58, 59, 60, 61, 62, 63}
+#define CONFIG_SYS_NAND_ECCSIZE		256
+#define CONFIG_SYS_NAND_ECCBYTES	3
+
+#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / \
+						CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * \
+						CONFIG_SYS_NAND_ECCSTEPS)
+
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_FIT
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_CMD_MTDPARTS
+
+/* Setup MTD for NAND on the SOM */
+#define MTDIDS_DEFAULT		"nand0=omap2-nand.0"
+#define MTDPARTS_DEFAULT	"mtdparts=omap2-nand.0:512k(MLO)," \
+				"512k(u-boot),128k(env1)," \
+				"128k(env2),6m(kernel),-(rootfs)"
+
+#define xstr(s)	str(s)
+#define str(s)	#s
+
+#define	CONFIG_TAM3517_SETTINGS						\
+	"netdev=eth0\0"							\
+	"nandargs=setenv bootargs root=${nandroot} "			\
+		"rootfstype=${nandrootfstype}\0"			\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip_sta=setenv bootargs ${bootargs} "			\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
+	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
+		"else run addip_sta;fi\0"				\
+	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"addtty=setenv bootargs ${bootargs}"				\
+		" console=ttyO0,${baudrate}\0"				\
+	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
+	"loadaddr=82000000\0"						\
+	"kernel_addr_r=82000000\0"					\
+	"hostname=" xstr(CONFIG_HOSTNAME) "\0"				\
+	"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"			\
+	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
+		"bootm ${kernel_addr}\0"				\
+	"nandboot=run nandargs addip addtty addmtd addmisc;"		\
+		"nand read ${kernel_addr_r} kernel\0"			\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
+		"run nfsargs addip addtty addmtd addmisc;"		\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_self=if run net_self_load;then "				\
+		"run ramargs addip addtty addmtd addmisc;"		\
+		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
+		"else echo Images not loades;fi\0"			\
+	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.img\0"			\
+	"load=tftp ${loadaddr} ${u-boot}\0"				\
+	"loadmlo=tftp ${loadaddr} ${mlo}\0"				\
+	"mlo=" xstr(CONFIG_HOSTNAME) "/MLO\0"				\
+	"uboot_addr=0x80000\0"						\
+	"update=nandecc sw;nand erase ${uboot_addr} 100000;"		\
+		"nand write ${loadaddr} ${uboot_addr} 80000\0"		\
+	"updatemlo=nandecc hw;nand erase 0 20000;"			\
+		"nand write ${loadaddr} 0 20000\0"			\
+	"upd=if run load;then echo Updating u-boot;if run update;"	\
+		"then echo U-Boot updated;"				\
+			"else echo Error updating u-boot !;"		\
+			"echo Board without bootloader !!;"		\
+		"fi;"							\
+		"else echo U-Boot not downloaded..exiting;fi\0"		\
+
+#endif /* __TAM3517_H */

include/configs/tegra2-common.h

@@ -51,8 +51,7 @@
 #define CONFIG_OF_LIBFDT		/* enable passing of devicetree */
 
 /* Environment */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE			0x20000	/* Total Size Environment */
+#define CONFIG_ENV_SIZE			0x2000	/* Total Size Environment */
 
 /*
  * Size of malloc() pool
@@ -152,7 +151,7 @@
 #define PHYS_SDRAM_1		TEGRA2_SDRC_CS0
 #define PHYS_SDRAM_1_SIZE	0x20000000	/* 512M */
 
-#define CONFIG_SYS_TEXT_BASE	0x00E08000
+#define CONFIG_SYS_TEXT_BASE	0x00108000
 #define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
 
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_STACKBASE

include/configs/twister.h

@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * Configuration for the Technexion twister board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tam3517-common.h"
+
+#define MACH_TYPE_TAM3517	2818
+#define CONFIG_MACH_TYPE	MACH_TYPE_TAM3517
+
+#define CONFIG_TAM3517_SW3_SETTINGS
+#define CONFIG_XR16L2751
+
+#define CONFIG_BOOTDELAY	10
+
+#define CONFIG_BOOTFILE		"uImage"
+
+#define CONFIG_HOSTNAME twister
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_PROMPT		"twister => "
+
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_16_BIT
+#define CONFIG_SMC911X_BASE		0x2C000000
+#define CONFIG_SMC911X_NO_EEPROM
+
+#define	CONFIG_EXTRA_ENV_SETTINGS	CONFIG_TAM3517_SETTINGS \
+	"bootcmd=run nandboot\0"
+
+#endif /* __CONFIG_H */

include/configs/ventana.h

@@ -52,4 +52,7 @@
 #define CONFIG_EFI_PARTITION
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
+
+/* Environment not stored */
+#define CONFIG_ENV_IS_NOWHERE
 #endif /* __CONFIG_H */

include/spi_flash.h

@@ -25,6 +25,7 @@
 
 #include <spi.h>
 #include <linux/types.h>
+#include <linux/compiler.h>
 
 struct spi_flash {
 	struct spi_slave *spi;
@@ -68,4 +69,6 @@ static inline int spi_flash_erase(struct spi_flash *flash, u32 offset,
 	return flash->erase(flash, offset, len);
 }
 
+void spi_boot(void) __noreturn;
+
 #endif /* _SPI_FLASH_H_ */

lib/Makefile

@@ -50,6 +50,8 @@ COBJS-$(CONFIG_SHA1) += sha1.o
 COBJS-$(CONFIG_SHA256) += sha256.o
 COBJS-y	+= strmhz.o
 COBJS-$(CONFIG_RBTREE)	+= rbtree.o
+else
+COBJS-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += display_options.o
 endif
 
 COBJS-y += ctype.o

tools/mkimage.c

@@ -383,65 +383,66 @@ NXTARG:		;
 		exit (EXIT_FAILURE);
 	}
 
-	if (!params.skipcpy &&
-		(params.type == IH_TYPE_MULTI ||
-			params.type == IH_TYPE_SCRIPT)) {
-		char *file = params.datafile;
-		uint32_t size;
-
-		for (;;) {
-			char *sep = NULL;
-
-			if (file) {
-				if ((sep = strchr(file, ':')) != NULL) {
-					*sep = '\0';
+	if (!params.skipcpy) {
+		if (params.type == IH_TYPE_MULTI ||
+		    params.type == IH_TYPE_SCRIPT) {
+			char *file = params.datafile;
+			uint32_t size;
+
+			for (;;) {
+				char *sep = NULL;
+
+				if (file) {
+					if ((sep = strchr(file, ':')) != NULL) {
+						*sep = '\0';
+					}
+
+					if (stat (file, &sbuf) < 0) {
+						fprintf (stderr, "%s: Can't stat %s: %s\n",
+							 params.cmdname, file, strerror(errno));
+						exit (EXIT_FAILURE);
+					}
+					size = cpu_to_uimage (sbuf.st_size);
+				} else {
+					size = 0;
 				}
 
-				if (stat (file, &sbuf) < 0) {
-					fprintf (stderr, "%s: Can't stat %s: %s\n",
-						params.cmdname, file, strerror(errno));
+				if (write(ifd, (char *)&size, sizeof(size)) != sizeof(size)) {
+					fprintf (stderr, "%s: Write error on %s: %s\n",
+						 params.cmdname, params.imagefile,
+						 strerror(errno));
 					exit (EXIT_FAILURE);
 				}
-				size = cpu_to_uimage (sbuf.st_size);
-			} else {
-				size = 0;
-			}
 
-			if (write(ifd, (char *)&size, sizeof(size)) != sizeof(size)) {
-				fprintf (stderr, "%s: Write error on %s: %s\n",
-					params.cmdname, params.imagefile,
-					strerror(errno));
-				exit (EXIT_FAILURE);
-			}
+				if (!file) {
+					break;
+				}
 
-			if (!file) {
-				break;
+				if (sep) {
+					*sep = ':';
+					file = sep + 1;
+				} else {
+					file = NULL;
+				}
 			}
 
-			if (sep) {
-				*sep = ':';
-				file = sep + 1;
-			} else {
-				file = NULL;
-			}
-		}
+			file = params.datafile;
 
-		file = params.datafile;
-
-		for (;;) {
-			char *sep = strchr(file, ':');
-			if (sep) {
-				*sep = '\0';
-				copy_file (ifd, file, 1);
-				*sep++ = ':';
-				file = sep;
-			} else {
-				copy_file (ifd, file, 0);
-				break;
+			for (;;) {
+				char *sep = strchr(file, ':');
+				if (sep) {
+					*sep = '\0';
+					copy_file (ifd, file, 1);
+					*sep++ = ':';
+					file = sep;
+				} else {
+					copy_file (ifd, file, 0);
+					break;
+				}
 			}
+		} else {
+			copy_file (ifd, params.datafile, 0);
 		}
-	} else {
-		copy_file (ifd, params.datafile, 0);
 	}
 
 	/* We're a bit of paranoid */