ARM: display5: Remove "factory procedure" from display5 board config

This code now is regarded as dead one and hence shall be removed.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

configs/display5_factory_defconfig

@@ -15,7 +15,7 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run factory"
+CONFIG_BOOTCOMMAND="echo SDP Display5 recovery"
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_MISC_INIT_R=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set

include/configs/display5.h

@@ -115,27 +115,6 @@
 	"name=rootfs2,size=512M,uuid=${uuid_gpt_rootfs2};" \
 	"name=data,size=-,uuid=${uuid_gpt_data}\0"
 
-#define FACTORY_PROCEDURE \
-	"echo '#######################';" \
-	"echo '# Factory Boot        #';" \
-	"echo '#######################';" \
-	"env default -a;" \
-	"saveenv;" \
-	"gpt write mmc ${mmcdev} ${partitions};" \
-	"run tftp_sf_SPL;" \
-	"run tftp_sf_uboot;" \
-	TFTP_UPDATE_KERNEL \
-	"run tftp_sf_fitImg_SWU;" \
-	"run tftp_sf_initramfs_SWU;" \
-	TFTP_UPDATE_ROOTFS \
-	"echo '#######################';" \
-	"echo '# END - OK            #';" \
-	"echo '#######################';" \
-	"setenv bootcmd 'env default -a; saveenv; run falcon_setup; reset';" \
-	"setenv boot_os 'n';" \
-	"saveenv;" \
-	"reset;"
-
 #define SWUPDATE_RECOVERY_PROCEDURE \
 	"echo '#######################';" \
 	"echo '# RECOVERY SWUupdate  #';" \
@@ -261,7 +240,6 @@
 	"bootdelay=1\0" \
 	"baudrate=115200\0" \
 	"bootcmd=" CONFIG_BOOTCOMMAND "\0" \
-	"factory=" FACTORY_PROCEDURE "\0" \
 	"ethact=FEC\0" \
 	"netdev=eth0\0" \
 	"boot_os=y\0" \