Convert CONFIG_SYS_OMAP24_I2C_SLAVE et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_OMAP24_I2C_SLAVE
   CONFIG_SYS_OMAP24_I2C_SPEED

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>

configs/am335x_baltos_defconfig

@@ -47,6 +47,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(SPL),128k(SPL.backup1),128k(SPL.backup2),128k(SPL.backup3),1920k(u-boot),-(UBI)"
 CONFIG_CMD_UBI=y
 CONFIG_ISO_PARTITION=y
+CONFIG_SYS_OMAP24_I2C_SPEED=1000
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_PHYLIB=y

configs/cm_t3517_defconfig

@@ -31,6 +31,7 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nand0=nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),256k(u-boot-env),4m(kernel),-(fs)"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_OMAP24_I2C_SPEED=400000
 CONFIG_LED_STATUS=y
 CONFIG_LED_STATUS_GPIO=y
 CONFIG_LED_STATUS0=y

configs/eco5pk_defconfig

@@ -26,6 +26,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(xloader-nand),1024k(uboot-nand),256k(params-nand),5120k(kernel),-(ubifs)"
 CONFIG_CMD_UBI=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_OMAP24_I2C_SPEED=400000
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y

configs/kc1_defconfig

@@ -34,6 +34,7 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_ISO_PARTITION=y
 CONFIG_EFI_PARTITION=y
+CONFIG_SYS_OMAP24_I2C_SPEED=400000
 CONFIG_MMC_OMAP_HS=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y

configs/mt_ventoux_defconfig

@@ -31,6 +31,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1m(u-boot),256k(env1),256k(env2),8m(ubisystem),-(rootfs)"
 CONFIG_CMD_UBI=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_OMAP24_I2C_SPEED=400000
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y

configs/sniper_defconfig

@@ -35,6 +35,7 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_ISO_PARTITION=y
 CONFIG_EFI_PARTITION=y
+CONFIG_SYS_OMAP24_I2C_SPEED=400000
 CONFIG_MMC_OMAP_HS=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y

configs/twister_defconfig

@@ -31,6 +31,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1m(u-boot),256k(env1),256k(env2),6m(kernel),-(rootfs)"
 CONFIG_CMD_UBI=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_OMAP24_I2C_SPEED=400000
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y

drivers/i2c/Kconfig

@@ -162,6 +162,20 @@ config SYS_I2C_OMAP24XX
 	help
 	  Add support for the OMAP2+ I2C driver.
 
+if SYS_I2C_OMAP24XX
+config SYS_OMAP24_I2C_SLAVE
+	int "I2C Slave addr channel 0"
+	default 1
+	help
+	  OMAP24xx I2C Slave address channel 0
+
+config SYS_OMAP24_I2C_SPEED
+	int "I2C Slave channel 0 speed"
+	default 100000
+	help
+	  OMAP24xx Slave speed channel 0
+endif
+
 config SYS_I2C_RCAR_IIC
 	bool "Renesas RCar Gen3 IIC driver"
 	depends on RCAR_GEN3 && DM_I2C

include/configs/am3517_crane.h

@@ -97,8 +97,6 @@
 #endif /* CONFIG_USB_AM35X */
 
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 
 /*
  * Board NAND Info.

include/configs/am3517_evm.h

@@ -56,8 +56,6 @@
 #endif /* CONFIG_USB_MUSB_AM35X */
 
 /* I2C */
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 
 /* Ethernet */
 #define CONFIG_DRIVER_TI_EMAC

include/configs/baltos.h

@@ -39,8 +39,6 @@
 #define CONFIG_MTD_DEVICE
 
 /* I2C configuration */
-#undef CONFIG_SYS_OMAP24_I2C_SPEED
-#define CONFIG_SYS_OMAP24_I2C_SPEED 1000
 
 #ifdef CONFIG_NAND
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x00080000

include/configs/bur_am335x_common.h

@@ -70,8 +70,6 @@
 
 /* I2C */
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 
 /*
  * Our platforms make use of SPL to initalize the hardware (primarily

include/configs/cm_t35.h

@@ -80,8 +80,6 @@
 #define CONFIG_MTD_PARTITIONS
 
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
 #define CONFIG_SYS_I2C_EEPROM_BUS	0

include/configs/cm_t3517.h

@@ -89,8 +89,6 @@
 #define CONFIG_MTD_PARTITIONS
 
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	400000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
 #define CONFIG_SYS_I2C_EEPROM_BUS	0

include/configs/kc1.h

@@ -58,8 +58,6 @@
  */
 
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	400000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 #define CONFIG_I2C_MULTI_BUS
 
 /*

include/configs/mcx.h

@@ -79,8 +79,6 @@
 #define CONFIG_MTD_DEVICE
 
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 
 /* RTC */
 #define CONFIG_RTC_DS1337

include/configs/nokia_rx51.h

@@ -95,8 +95,6 @@
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
 
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 
 /*
  * TWL4030

include/configs/siemens-am33x-common.h

@@ -97,8 +97,6 @@
 /* I2C Configuration */
 #define CONFIG_I2C
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK

include/configs/sniper.h

@@ -59,8 +59,6 @@
  */
 
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	400000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 #define CONFIG_I2C_MULTI_BUS
 
 /*

include/configs/tam3517-common.h

@@ -67,8 +67,6 @@
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	25
 
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	400000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* base address */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* bytes of address */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07

include/configs/tao3530.h

@@ -63,8 +63,6 @@
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
 
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 #define CONFIG_I2C_MULTI_BUS
 
 /*

include/configs/ti_armv7_omap.h

@@ -13,8 +13,6 @@
 #define __CONFIG_TI_ARMV7_OMAP_H__
 
 /* I2C IP block */
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 
 /*
  * GPMC NAND block.  We support 1 device and the physical address to

include/configs/tricorder.h

@@ -58,8 +58,6 @@
 
 /* I2C */
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
  
 
 /* EEPROM */

scripts/config_whitelist.txt

@@ -3881,12 +3881,10 @@ CONFIG_SYS_NVRAM_SIZE
 CONFIG_SYS_OBIR
 CONFIG_SYS_OHCI_BE_CONTROLLER
 CONFIG_SYS_OHCI_SWAP_REG_ACCESS
-CONFIG_SYS_OMAP24_I2C_SLAVE
 CONFIG_SYS_OMAP24_I2C_SLAVE1
 CONFIG_SYS_OMAP24_I2C_SLAVE2
 CONFIG_SYS_OMAP24_I2C_SLAVE3
 CONFIG_SYS_OMAP24_I2C_SLAVE4
-CONFIG_SYS_OMAP24_I2C_SPEED
 CONFIG_SYS_OMAP24_I2C_SPEED1
 CONFIG_SYS_OMAP24_I2C_SPEED2
 CONFIG_SYS_OMAP24_I2C_SPEED3