usb: gadget: usb_ether: Move settings to common

The usb_ether gadget duplicates the USB settings for the manufacturer,
product ID and vendor ID.

Make sure we use the common option so that we can expect a single VID/PID
couple for a single device.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

configs/sama5d2_ptc_nandflash_defconfig

@@ -29,5 +29,6 @@ CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Atmel SAMA5D2_PTC"
 CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ETHER=y

configs/sama5d2_ptc_spiflash_defconfig

@@ -30,5 +30,6 @@ CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Atmel SAMA5D2_PTC"
 CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ETHER=y

configs/vinco_defconfig

@@ -31,6 +31,7 @@ CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="L+G VInCo"
 CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ETHER=y
 CONFIG_USB_HOST_ETHER=y

drivers/usb/gadget/ether.c

@@ -273,8 +273,8 @@ static inline int BITRATE(struct usb_gadget *g)
  * static ushort idProduct;
  */
 
-#if defined(CONFIG_USBNET_MANUFACTURER)
-static char *iManufacturer = CONFIG_USBNET_MANUFACTURER;
+#if defined(CONFIG_USB_GADGET_MANUFACTURER)
+static char *iManufacturer = CONFIG_USB_GADGET_MANUFACTURER;
 #else
 static char *iManufacturer = "U-Boot";
 #endif
@@ -2073,11 +2073,11 @@ static int eth_bind(struct usb_gadget *gadget)
 	 * to choose the right configuration otherwise.
 	 */
 	if (rndis) {
-#if defined(CONFIG_USB_RNDIS_VENDOR_ID) && defined(CONFIG_USB_RNDIS_PRODUCT_ID)
+#if defined(CONFIG_USB_GADGET_VENDOR_NUM) && defined(CONFIG_USB_GADGET_PRODUCT_NUM)
 		device_desc.idVendor =
-			__constant_cpu_to_le16(CONFIG_USB_RNDIS_VENDOR_ID);
+			__constant_cpu_to_le16(CONFIG_USB_GADGET_VENDOR_NUM);
 		device_desc.idProduct =
-			__constant_cpu_to_le16(CONFIG_USB_RNDIS_PRODUCT_ID);
+			__constant_cpu_to_le16(CONFIG_USB_GADGET_PRODUCT_NUM);
 #else
 		device_desc.idVendor =
 			__constant_cpu_to_le16(RNDIS_VENDOR_NUM);
@@ -2092,9 +2092,9 @@ static int eth_bind(struct usb_gadget *gadget)
 	 * supporting one submode of the "SAFE" variant of MDLM.)
 	 */
 	} else {
-#if defined(CONFIG_USB_CDC_VENDOR_ID) && defined(CONFIG_USB_CDC_PRODUCT_ID)
-		device_desc.idVendor = cpu_to_le16(CONFIG_USB_CDC_VENDOR_ID);
-		device_desc.idProduct = cpu_to_le16(CONFIG_USB_CDC_PRODUCT_ID);
+#if defined(CONFIG_USB_GADGET_VENDOR_NUM) && defined(CONFIG_USB_GADGET_PRODUCT_NUM)
+		device_desc.idVendor = cpu_to_le16(CONFIG_USB_GADGET_VENDOR_NUM);
+		device_desc.idProduct = cpu_to_le16(CONFIG_USB_GADGET_PRODUCT_NUM);
 #else
 		if (!cdc) {
 			device_desc.idVendor =

include/configs/ma5d4evk.h

@@ -100,7 +100,6 @@
 #ifdef CONFIG_CMD_USB
 
 /* USB device */
-#define CONFIG_USBNET_MANUFACTURER      "AriesEmbedded"
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(1 * 1024 * 1024)
 #define DFU_DEFAULT_POLL_TIMEOUT	300

include/configs/sama5d2_ptc.h

@@ -62,7 +62,6 @@
 #endif
 
 /* USB device */
-#define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D2_PTC"
 
 /* Ethernet Hardware */
 #define CONFIG_MACB

include/configs/vinco.h

@@ -67,7 +67,6 @@
 #endif
 
 /* USB device */
-#define CONFIG_USBNET_MANUFACTURER      "L+G VInCo"
 
 /* Ethernet Hardware */
 #define CONFIG_PHY_SMSC

scripts/config_whitelist.txt

@@ -4973,7 +4973,6 @@ CONFIG_USBD_SERIAL_OUT_PKTSIZE
 CONFIG_USBD_VENDORID
 CONFIG_USBID_ADDR
 CONFIG_USBNET_DEV_ADDR
-CONFIG_USBNET_MANUFACTURER
 CONFIG_USBTTY
 CONFIG_USB_AM35X
 CONFIG_USB_ATMEL