Merge git://git.denx.de/u-boot-mpc85xx

arch/powerpc/cpu/mpc83xx/cpu_init.c

@@ -205,8 +205,7 @@ void cpu_init_f (volatile immap_t * im)
 	/* Pointer is writable since we allocated a register for it */
 	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 
-	/* Clear initial global data */
-	memset ((void *) gd, 0, sizeof (gd_t));
+	/* global data region was cleared in start.S */
 
 	/* system performance tweaking */
 	clrsetbits_be32(&im->arbiter.acr, acr_mask, acr_val);

arch/powerpc/cpu/mpc83xx/spl_minimal.c

@@ -18,14 +18,10 @@ DECLARE_GLOBAL_DATA_PTR;
  */
 void cpu_init_f (volatile immap_t * im)
 {
-	int i;
-
 	/* Pointer is writable since we allocated a register for it */
 	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 
-	/* Clear initial global data */
-	for (i = 0; i < sizeof(gd_t); i++)
-		((char *)gd)[i] = 0;
+	/* global data region was cleared in start.S */
 
 	/* system performance tweaking */
 

arch/powerpc/cpu/mpc83xx/start.S

@@ -258,14 +258,40 @@ in_flash:
 #endif
 
 	/* set up the stack pointer in our newly created
-	 * cache-ram (r1) */
-	lis	r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
-	ori	r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
+	 * cache-ram; use r3 to keep the new SP for now to
+	 * avoid overiding the SP it uselessly */
+	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
+	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
 
+	/* r4 = end of GD area */
+	addi r4, r3, GENERATED_GBL_DATA_SIZE
+
+	/* Zero GD area */
+	li	r0, 0
+1:
+	subi	r4, r4, 1
+	stb	r0, 0(r4)
+	cmplw	r3, r4
+	bne	1b
+
+#ifdef CONFIG_SYS_MALLOC_F_LEN
+
+#if CONFIG_SYS_MALLOC_F_LEN + GENERATED_GBL_DATA_SIZE > CONFIG_SYS_INIT_RAM_SIZE
+#error "CONFIG_SYS_MALLOC_F_LEN too large to fit into initial RAM."
+#endif
+
+	/* r3 = new stack pointer / pre-reloc malloc area */
+	subi    r3, r3, CONFIG_SYS_MALLOC_F_LEN
+
+	/* Set pointer to pre-reloc malloc area in GD */
+	stw     r3, GD_MALLOC_BASE(r4)
+#endif
 	li	r0, 0		/* Make room for stack frame header and	*/
-	stwu	r0, -4(r1)	/* clear final stack frame so that	*/
-	stwu	r0, -4(r1)	/* stack backtraces terminate cleanly	*/
+	stwu	r0, -4(r3)	/* clear final stack frame so that	*/
+	stwu	r0, -4(r3)	/* stack backtraces terminate cleanly	*/
 
+	/* Finally, actually set SP */
+	mr	r1, r3
 
 	/* let the C-code set up the rest	                    */
 	/*				                            */

arch/powerpc/cpu/mpc85xx/start.S

@@ -1373,8 +1373,8 @@ icache_enable:
 	mtlr	r8
 	isync
 	mfspr	r4,L1CSR1
-	ori	r4,r4,0x0001
-	oris	r4,r4,0x0001
+	ori	r4,r4,(L1CSR1_CPE | L1CSR1_ICE)@l
+	oris	r4,r4,(L1CSR1_CPE | L1CSR1_ICE)@h
 	mtspr	L1CSR1,r4
 	isync
 	blr
@@ -1402,8 +1402,8 @@ dcache_enable:
 	mtlr	r8
 	isync
 	mfspr	r0,L1CSR0
-	ori	r0,r0,0x0001
-	oris	r0,r0,0x0001
+	ori	r0,r0,(L1CSR0_CPE |  L1CSR0_DCE)@l
+	oris	r0,r0,(L1CSR0_CPE |  L1CSR0_DCE)@h
 	msync
 	isync
 	mtspr	L1CSR0,r0

arch/powerpc/lib/memcpy_mpc5200.c

@@ -31,7 +31,7 @@ void *memcpy(void *trg, const void *src, size_t len)
 	extern void* __memcpy(void *, const void *, size_t);
 	char *s = (char *)src;
 	char *t = (char *)trg;
-	void *dest = (void *)src;
+	void *dest = (void *)trg;
 
 	/*
 	 * Check is source address is in flash: