Merge git://git.denx.de/u-boot-samsung

arch/arm/cpu/armv7/exynos/clock.c

@@ -1362,7 +1362,7 @@ int exynos5_set_i2s_clk_prescaler(unsigned int src_frq,
 		}
 		clrsetbits_le32(&clk->div_mau, AUDIO_0_RATIO_MASK,
 				(div & AUDIO_0_RATIO_MASK));
-	} else if(i2s_id == 1) {
+	} else if (i2s_id == 1) {
 		if (div > AUDIO_1_RATIO_MASK) {
 			debug("%s: Frequency ratio is out of range\n",
 			      __func__);
@@ -1579,45 +1579,49 @@ unsigned long get_pll_clk(int pllreg)
 		if (proid_is_exynos5420() || proid_is_exynos5800())
 			return exynos542x_get_pll_clk(pllreg);
 		return exynos5_get_pll_clk(pllreg);
-	} else {
+	} else if (cpu_is_exynos4()) {
 		if (proid_is_exynos4412())
 			return exynos4x12_get_pll_clk(pllreg);
 		return exynos4_get_pll_clk(pllreg);
 	}
+
+	return 0;
 }
 
 unsigned long get_arm_clk(void)
 {
-	if (cpu_is_exynos5())
+	if (cpu_is_exynos5()) {
 		return exynos5_get_arm_clk();
-	else {
+	} else if (cpu_is_exynos4()) {
 		if (proid_is_exynos4412())
 			return exynos4x12_get_arm_clk();
 		return exynos4_get_arm_clk();
 	}
+
+	return 0;
 }
 
 unsigned long get_i2c_clk(void)
 {
-	if (cpu_is_exynos5()) {
+	if (cpu_is_exynos5())
 		return clock_get_periph_rate(PERIPH_ID_I2C0);
-	} else if (cpu_is_exynos4()) {
+	else if (cpu_is_exynos4())
 		return exynos4_get_i2c_clk();
-	} else {
-		debug("I2C clock is not set for this CPU\n");
-		return 0;
-	}
+
+	return 0;
 }
 
 unsigned long get_pwm_clk(void)
 {
 	if (cpu_is_exynos5()) {
 		return clock_get_periph_rate(PERIPH_ID_PWM0);
-	} else {
+	} else if (cpu_is_exynos4()) {
 		if (proid_is_exynos4412())
 			return exynos4x12_get_pwm_clk();
 		return exynos4_get_pwm_clk();
 	}
+
+	return 0;
 }
 
 unsigned long get_uart_clk(int dev_index)
@@ -1644,11 +1648,13 @@ unsigned long get_uart_clk(int dev_index)
 
 	if (cpu_is_exynos5()) {
 		return clock_get_periph_rate(id);
-	} else {
+	} else if (cpu_is_exynos4()) {
 		if (proid_is_exynos4412())
 			return exynos4x12_get_uart_clk(dev_index);
 		return exynos4_get_uart_clk(dev_index);
 	}
+
+	return 0;
 }
 
 unsigned long get_mmc_clk(int dev_index)
@@ -1673,11 +1679,12 @@ unsigned long get_mmc_clk(int dev_index)
 		return -1;
 	}
 
-	if (cpu_is_exynos5()) {
+	if (cpu_is_exynos5())
 		return clock_get_periph_rate(id);
-	} else {
+	else if (cpu_is_exynos4())
 		return exynos4_get_mmc_clk(dev_index);
-	}
+
+	return 0;
 }
 
 void set_mmc_clk(int dev_index, unsigned int div)
@@ -1691,16 +1698,16 @@ void set_mmc_clk(int dev_index, unsigned int div)
 			exynos5420_set_mmc_clk(dev_index, div);
 		else
 			exynos5_set_mmc_clk(dev_index, div);
-	} else {
+	} else if (cpu_is_exynos4()) {
 		exynos4_set_mmc_clk(dev_index, div);
 	}
 }
 
 unsigned long get_lcd_clk(void)
 {
-	if (cpu_is_exynos4())
+	if (cpu_is_exynos4()) {
 		return exynos4_get_lcd_clk();
-	else {
+	} else if (cpu_is_exynos5()) {
 		if (proid_is_exynos5420())
 			return exynos5420_get_lcd_clk();
 		else if (proid_is_exynos5800())
@@ -1708,13 +1715,15 @@ unsigned long get_lcd_clk(void)
 		else
 			return exynos5_get_lcd_clk();
 	}
+
+	return 0;
 }
 
 void set_lcd_clk(void)
 {
-	if (cpu_is_exynos4())
+	if (cpu_is_exynos4()) {
 		exynos4_set_lcd_clk();
-	else {
+	} else if (cpu_is_exynos5()) {
 		if (proid_is_exynos5250())
 			exynos5_set_lcd_clk();
 		else if (proid_is_exynos5420())
@@ -1736,9 +1745,9 @@ int set_spi_clk(int periph_id, unsigned int rate)
 		if (proid_is_exynos5420() || proid_is_exynos5800())
 			return exynos5420_set_spi_clk(periph_id, rate);
 		return exynos5_set_spi_clk(periph_id, rate);
-	} else {
-		return 0;
 	}
+
+	return 0;
 }
 
 int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq,
@@ -1746,22 +1755,22 @@ int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq,
 {
 	if (cpu_is_exynos5())
 		return exynos5_set_i2s_clk_prescaler(src_frq, dst_frq, i2s_id);
-	else
-		return 0;
+
+	return 0;
 }
 
 int set_i2s_clk_source(unsigned int i2s_id)
 {
 	if (cpu_is_exynos5())
 		return exynos5_set_i2s_clk_source(i2s_id);
-	else
-		return 0;
+
+	return 0;
 }
 
 int set_epll_clk(unsigned long rate)
 {
 	if (cpu_is_exynos5())
 		return exynos5_set_epll_clk(rate);
-	else
-		return 0;
+
+	return 0;
 }

drivers/gpio/s3c2440_gpio.c

@@ -8,53 +8,50 @@
 #include <asm/arch/s3c2440.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
+#include <errno.h>
 
 #define GPIO_INPUT  0x0
 #define GPIO_OUTPUT 0x1
 
-/* 0x4 means that we want DAT and not CON register */
-#define GPIO_PORT(x)	((((x) >> 5) & 0x3) + 0x4)
-#define GPIO_BIT(x)		((x) & 0x3f)
+#define S3C_GPIO_CON	0x0
+#define S3C_GPIO_DAT	0x4
 
-/*
- * It's how we calculate the full port address
- * We have to get the number of the port + 1 (Port A is at 0x56000001 ...)
- * We move it at the second digit, and finally we add 0x4 because we want
- * to modify GPIO DAT and not CON
- */
-#define GPIO_FULLPORT(x) (S3C24X0_GPIO_BASE | ((GPIO_PORT(gpio) + 1) << 1))
+static uint32_t s3c_gpio_get_bank_addr(unsigned gpio)
+{
+	/* There is up to 16 pins per bank, one bank is 0x10 big. */
+	uint32_t addr = gpio & ~0xf;
+
+	if (addr >= 0x80 && addr != 0xd0) {	/* Wrong GPIO bank. */
+		printf("Invalid GPIO bank (bank %02x)\n", addr);
+		return 0xffffffff;
+	}
+
+	return addr | S3C24X0_GPIO_BASE;
+}
 
 int gpio_set_value(unsigned gpio, int value)
 {
-	unsigned l = readl(GPIO_FULLPORT(gpio));
-	unsigned bit;
-	unsigned port = GPIO_FULLPORT(gpio);
-
-	/*
-	 * All GPIO Port have a configuration on
-	 * 2 bits excepted the first GPIO (A) which
-	 * have only 1 bit of configuration.
-	 */
-	if (!GPIO_PORT(gpio))
-		bit = (0x1 << GPIO_BIT(gpio));
-	else
-		bit = (0x3 << GPIO_BIT(gpio));
+	uint32_t addr = s3c_gpio_get_bank_addr(gpio);
+
+	if (addr == 0xffffffff)
+		return -EINVAL;
 
 	if (value)
-		l |= bit;
+		setbits_le32(addr | S3C_GPIO_DAT, 1 << (gpio & 0xf));
 	else
-		l &= ~bit;
+		clrbits_le32(addr | S3C_GPIO_DAT, 1 << (gpio & 0xf));
 
-	return writel(l, port);
+	return 0;
 }
 
 int gpio_get_value(unsigned gpio)
 {
-	unsigned l = readl(GPIO_FULLPORT(gpio));
+	uint32_t addr = s3c_gpio_get_bank_addr(gpio);
+
+	if (addr == 0xffffffff)
+		return -EINVAL;
 
-	if (GPIO_PORT(gpio) == 0) /* PORT A */
-		return (l >> GPIO_BIT(gpio)) & 0x1;
-	return (l >> GPIO_BIT(gpio)) & 0x3;
+	return !!(readl(addr | S3C_GPIO_DAT) & (1 << (gpio & 0xf)));
 }
 
 int gpio_request(unsigned gpio, const char *label)
@@ -67,13 +64,25 @@ int gpio_free(unsigned gpio)
 	return 0;
 }
 
+static int s3c_gpio_direction(unsigned gpio, uint8_t dir)
+{
+	uint32_t addr = s3c_gpio_get_bank_addr(gpio);
+	const uint32_t mask = 0x3 << ((gpio & 0xf) << 1);
+	const uint32_t dirm = dir << ((gpio & 0xf) << 1);
+
+	if (addr == 0xffffffff)
+		return -EINVAL;
+
+	clrsetbits_le32(addr | S3C_GPIO_CON, mask, dirm);
+	return 0;
+}
+
 int gpio_direction_input(unsigned gpio)
 {
-	return writel(GPIO_INPUT << GPIO_BIT(gpio), GPIO_FULLPORT(gpio));
+	return s3c_gpio_direction(gpio, GPIO_INPUT);
 }
 
 int gpio_direction_output(unsigned gpio, int value)
 {
-	writel(GPIO_OUTPUT << GPIO_BIT(gpio), GPIO_FULLPORT(gpio));
-	return gpio_set_value(gpio, value);
+	return s3c_gpio_direction(gpio, GPIO_OUTPUT);
 }

drivers/i2c/s3c24x0_i2c.c

@@ -165,7 +165,7 @@ static int GetI2CSDA(void)
 {
 	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
 
-#ifdef CONFIG_S3C2410
+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 	return (readl(&gpio->gpedat) & 0x8000) >> 15;
 #endif
 #ifdef CONFIG_S3C2400
@@ -177,7 +177,7 @@ static void SetI2CSCL(int x)
 {
 	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
 
-#ifdef CONFIG_S3C2410
+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 	writel((readl(&gpio->gpedat) & ~0x4000) |
 					(x & 1) << 14, &gpio->gpedat);
 #endif
@@ -443,7 +443,7 @@ static void s3c24x0_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
 	int i;
 
 	if ((readl(&i2c->iicstat) & I2CSTAT_BSY) || GetI2CSDA() == 0) {
-#ifdef CONFIG_S3C2410
+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 		ulong old_gpecon = readl(&gpio->gpecon);
 #endif
 #ifdef CONFIG_S3C2400
@@ -452,7 +452,7 @@ static void s3c24x0_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
 		/* bus still busy probably by (most) previously interrupted
 		   transfer */
 
-#ifdef CONFIG_S3C2410
+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 		/* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
 		writel((readl(&gpio->gpecon) & ~0xF0000000) | 0x10000000,
 		       &gpio->gpecon);
@@ -478,7 +478,7 @@ static void s3c24x0_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
 		udelay(1000);
 
 		/* restore pin functions */
-#ifdef CONFIG_S3C2410
+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 		writel(old_gpecon, &gpio->gpecon);
 #endif
 #ifdef CONFIG_S3C2400