arm, am335x: siemens boards add FIT support

add FIT support and set "boardid" from factoryset records
"DEV/id" and "COMP/ver". "boardid" is used for selecting
which fit configuration gets booted on the board.

Signed-off-by: Heiko Schocher <hs@denx.de>

board/siemens/common/board.c

@@ -96,15 +96,6 @@ const struct dpll_params *get_dpll_ddr_params(void)
 	return &dpll_ddr;
 }
 
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
-	omap_nand_switch_ecc(1, 8);
-
-	return 0;
-}
-#endif
-
 #ifndef CONFIG_SPL_BUILD
 #if defined(BOARD_DFU_BUTTON_GPIO)
 /*

board/siemens/common/factoryset.c

@@ -220,15 +220,6 @@ int factoryset_read_eeprom(int i2c_addr)
 	printf("DFU USB: VID = 0x%4x, PID = 0x%4x\n", factory_dat.usb_vendor_id,
 	       factory_dat.usb_product_id);
 #endif
-	if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
-					(uchar *)"id", buf,
-					MAX_STRING_LENGTH)) {
-		if (strncmp((const char *)buf, "PXM50", 5) == 0)
-			factory_dat.pxm50 = 1;
-		else
-			factory_dat.pxm50 = 0;
-	}
-	debug("PXM50: %d\n", factory_dat.pxm50);
 #if defined(CONFIG_VIDEO)
 	if (0 <= get_factory_record_val(cp, size, (uchar *)"DISP1",
 					(uchar *)"name", factory_dat.disp_name,
@@ -248,7 +239,14 @@ int factoryset_read_eeprom(int i2c_addr)
 							    NULL, 16);
 		debug("version number: %d\n", factory_dat.version);
 	}
-
+	/* Get ASN from factory set if available */
+	if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
+					(uchar *)"id", factory_dat.asn,
+					MAX_STRING_LENGTH)) {
+		debug("factoryset asn: %s\n", factory_dat.asn);
+	} else {
+		factory_dat.asn[0] = 0;
+	}
 	/* Get COMP/ver from factory set if available */
 	if (0 <= get_factory_record_val(cp, size, (uchar *)"COMP",
 					(uchar *)"ver",

board/siemens/common/factoryset.h

@@ -20,6 +20,7 @@ struct factorysetcontainer {
 #endif
 	unsigned char serial[MAX_STRING_LENGTH];
 	int version;
+	uchar asn[MAX_STRING_LENGTH];
 	uchar comp_version[MAX_STRING_LENGTH];
 };
 

board/siemens/draco/board.c

@@ -280,4 +280,13 @@ U_BOOT_CMD(
 #endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
 #endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
 
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+	omap_nand_switch_ecc(1, 8);
+
+	return 0;
+}
+#endif
+
 #include "../common/board.c"

board/siemens/pxm2/board.c

@@ -428,4 +428,38 @@ static int board_video_init(void)
 	return 0;
 }
 #endif
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+	int ret;
+
+	omap_nand_switch_ecc(1, 8);
+
+#ifdef CONFIG_FACTORYSET
+	if (factory_dat.asn[0] != 0) {
+		char tmp[2 * MAX_STRING_LENGTH + 2];
+
+		if (strncmp((const char *)factory_dat.asn, "PXM50", 5) == 0)
+			factory_dat.pxm50 = 1;
+		else
+			factory_dat.pxm50 = 0;
+		sprintf(tmp, "%s_%s", factory_dat.asn,
+			factory_dat.comp_version);
+		ret = setenv("boardid", tmp);
+		if (ret)
+			printf("error setting board id\n");
+	} else {
+		factory_dat.pxm50 = 1;
+		ret = setenv("boardid", "PXM50_1.0");
+		if (ret)
+			printf("error setting board id\n");
+	}
+	debug("PXM50: %d\n", factory_dat.pxm50);
+#endif
+
+	return 0;
+}
+#endif
+
 #include "../common/board.c"

board/siemens/rut/board.c

@@ -467,4 +467,27 @@ static int board_video_init(void)
 	return 0;
 }
 #endif /* ifdef CONFIG_VIDEO */
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+	int ret;
+	char tmp[2 * MAX_STRING_LENGTH + 2];
+
+	omap_nand_switch_ecc(1, 8);
+
+	if (factory_dat.asn[0] != 0)
+		sprintf(tmp, "%s_%s", factory_dat.asn,
+			factory_dat.comp_version);
+	else
+		sprintf(tmp, "QMX7.E38_4.0");
+
+	ret = setenv("boardid", tmp);
+	if (ret)
+		printf("error setting board id\n");
+
+	return 0;
+}
+#endif
+
 #include "../common/board.c"

include/configs/pxm2.h

@@ -150,4 +150,8 @@
 #define CONFIG_SYS_CONSOLE_FG_COL	0x00
 #endif
 
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_FIT
+#endif
+
 #endif	/* ! __CONFIG_PXM2_H */

include/configs/rut.h

@@ -154,4 +154,8 @@
 #define CONFIG_SYS_CONSOLE_FG_COL	0x00
 #endif
 
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_FIT
+#endif
+
 #endif	/* ! __CONFIG_RUT_H */