Merge git://git.denx.de/u-boot-usb

common/fb_mmc.c

@@ -132,7 +132,7 @@ static lbaint_t fb_mmc_get_boot_header(struct blk_desc *dev_desc,
 
 	/* Read the boot image header */
 	res = blk_dread(dev_desc, info->start, hdr_sectors, (void *)hdr);
-	if (res == 0) {
+	if (res != hdr_sectors) {
 		error("cannot read header from boot partition");
 		fastboot_fail("cannot read header from boot partition");
 		return 0;
@@ -162,7 +162,7 @@ static int fb_mmc_update_zimage(struct blk_desc *dev_desc,
 				void *download_buffer,
 				unsigned int download_bytes)
 {
-	u32 hdr_addr;				/* boot image header address */
+	uintptr_t hdr_addr;			/* boot image header address */
 	struct andr_img_hdr *hdr;		/* boot image header */
 	lbaint_t hdr_sectors;			/* boot image header sectors */
 	u8 *ramdisk_buffer;
@@ -185,7 +185,7 @@ static int fb_mmc_update_zimage(struct blk_desc *dev_desc,
 	}
 
 	/* Put boot image header in fastboot buffer after downloaded zImage */
-	hdr_addr = (u32)download_buffer + ALIGN(download_bytes, PAGE_SIZE);
+	hdr_addr = (uintptr_t)download_buffer + ALIGN(download_bytes, PAGE_SIZE);
 	hdr = (struct andr_img_hdr *)hdr_addr;
 
 	/* Read boot image header */
@@ -215,7 +215,7 @@ static int fb_mmc_update_zimage(struct blk_desc *dev_desc,
 	ramdisk_buffer = (u8 *)hdr + (hdr_sectors * info.blksz);
 	res = blk_dread(dev_desc, ramdisk_sector_start, ramdisk_sectors,
 			ramdisk_buffer);
-	if (res == 0) {
+	if (res != ramdisk_sectors) {
 		error("cannot read ramdisk from boot partition");
 		fastboot_fail("cannot read ramdisk from boot partition");
 		return -1;

configs/MPC8544DS_defconfig

@@ -28,5 +28,6 @@ CONFIG_RTL8139=y
 CONFIG_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_PCI=y
 CONFIG_USB_STORAGE=y
 CONFIG_OF_LIBFDT=y

configs/MPC8572DS_36BIT_defconfig

@@ -27,5 +27,6 @@ CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_PCI=y
 CONFIG_USB_STORAGE=y
 CONFIG_OF_LIBFDT=y

configs/MPC8572DS_defconfig

@@ -26,5 +26,6 @@ CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_PCI=y
 CONFIG_USB_STORAGE=y
 CONFIG_OF_LIBFDT=y

doc/README.dfutftp

@@ -1,3 +1,11 @@
+#
+#  Copyright (C) 2015
+#
+#  Lukasz Majewski <l.majewski@majess.pl>
+#
+#
+# SPDX-License-Identifier:	GPL-2.0+
+
 Device Firmware Upgrade (DFU) - extension to use TFTP
 =====================================================
 

drivers/usb/gadget/f_fastboot.c

@@ -561,7 +561,7 @@ static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
 
 	puts("Booting kernel..\n");
 
-	sprintf(boot_addr_start, "0x%lx", load_addr);
+	sprintf(boot_addr_start, "0x%lx", CONFIG_FASTBOOT_BUF_ADDR);
 	do_bootm(NULL, 0, 2, bootm_args);
 
 	/* This only happens if image is somehow faulty so we start over */
@@ -718,7 +718,7 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
 	}
 
 	if (!func_cb) {
-		error("unknown command: %s", cmdbuf);
+		error("unknown command: %.*s", req->actual, cmdbuf);
 		fastboot_tx_write_str("FAILunknown command");
 	} else {
 		if (req->actual < req->length) {

drivers/usb/host/Kconfig

@@ -142,6 +142,12 @@ config USB_EHCI_MSM
 	  This driver supports combination of Chipidea USB controller
 	  and Synapsys USB PHY in host mode only.
 
+config USB_EHCI_PCI
+	bool "Support for PCI-based EHCI USB controller"
+	default y if X86
+	help
+	  Enables support for the PCI-based EHCI controller.
+
 config USB_EHCI_RCAR_GEN3
 	bool "Support for Renesas RCar M3/H3 EHCI USB controller"
 	depends on RCAR_GEN3

include/configs/MPC8544DS.h

@@ -347,7 +347,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 
 #ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_USB_EHCI_PCI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_PCI_EHCI_DEVICE			0
 #endif

include/configs/MPC8572DS.h

@@ -545,7 +545,6 @@
  */
 
 #ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_USB_EHCI_PCI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_PCI_EHCI_DEVICE			0
 #endif

include/configs/efi-x86.h

@@ -12,7 +12,6 @@
 #undef CONFIG_TPM_TIS_BASE_ADDRESS
 
 #undef CONFIG_SCSI_AHCI
-#undef CONFIG_USB_EHCI_PCI
 
 #define CONFIG_STD_DEVICES_SETTINGS     "stdin=usbkbd,vga,serial\0" \
 					"stdout=vga,serial\0" \

include/configs/x86-common.h

@@ -118,7 +118,6 @@
 /*-----------------------------------------------------------------------
  * USB configuration
  */
-#define CONFIG_USB_EHCI_PCI
 #define CONFIG_SYS_USB_EVENT_POLL
 
 #define CONFIG_USB_HOST_ETHER

scripts/config_whitelist.txt

@@ -5026,7 +5026,6 @@ CONFIG_USB_EHCI_KIRKWOOD
 CONFIG_USB_EHCI_MX5
 CONFIG_USB_EHCI_MXC
 CONFIG_USB_EHCI_MXS
-CONFIG_USB_EHCI_PCI
 CONFIG_USB_EHCI_RMOBILE
 CONFIG_USB_EHCI_SPEAR
 CONFIG_USB_EHCI_SUNXI