net: Move CONFIG_RTL8169 to Kconfig

Introduce CONFIG_RTL8169 in Kconfig and move over boards' defconfig
to use that.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Stephen Warren <swaren@nvidia.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

configs/beaver_defconfig

@@ -15,6 +15,7 @@ CONFIG_CMD_GPIO=y
 # CONFIG_CMD_NFS is not set
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_RTL8169=y
 CONFIG_PCI_TEGRA=y
 CONFIG_SYS_NS16550=y
 CONFIG_TEGRA20_SLINK=y

configs/cardhu_defconfig

@@ -15,6 +15,7 @@ CONFIG_CMD_GPIO=y
 # CONFIG_CMD_NFS is not set
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_RTL8169=y
 CONFIG_PCI_TEGRA=y
 CONFIG_SYS_NS16550=y
 CONFIG_TEGRA20_SLINK=y

configs/chromebox_panther_defconfig

@@ -27,6 +27,7 @@ CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_DM_ETH=y
+CONFIG_RTL8169=y
 CONFIG_DM_PCI=y
 CONFIG_DM_RTC=y
 CONFIG_SYS_NS16550=y

configs/jetson-tk1_defconfig

@@ -15,6 +15,7 @@ CONFIG_CMD_GPIO=y
 # CONFIG_CMD_NFS is not set
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_RTL8169=y
 CONFIG_PCI_TEGRA=y
 CONFIG_SYS_NS16550=y
 CONFIG_TEGRA114_SPI=y

configs/minnowmax_defconfig

@@ -29,6 +29,7 @@ CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_DM_ETH=y
+CONFIG_RTL8169=y
 CONFIG_DM_PCI=y
 CONFIG_DM_RTC=y
 CONFIG_DEBUG_UART=y

configs/p2371-2180_defconfig

@@ -14,6 +14,7 @@ CONFIG_CMD_GPIO=y
 # CONFIG_CMD_NFS is not set
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_RTL8169=y
 CONFIG_PCI_TEGRA=y
 CONFIG_SYS_NS16550=y
 CONFIG_TEGRA114_SPI=y

configs/trimslice_defconfig

@@ -15,6 +15,7 @@ CONFIG_CMD_GPIO=y
 # CONFIG_CMD_NFS is not set
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_RTL8169=y
 CONFIG_PCI_TEGRA=y
 CONFIG_SYS_NS16550=y
 CONFIG_TEGRA20_SFLASH=y

drivers/net/Kconfig

@@ -108,6 +108,12 @@ config RTL8139
 	  This driver supports Realtek 8139 series fast ethernet family of
 	  PCI chipsets/adapters.
 
+config RTL8169
+	bool "Realtek 8169 series Ethernet controller driver"
+	help
+	  This driver supports Realtek 8169 series gigabit ethernet family of
+	  PCI/PCIe chipsets/adapters.
+
 config XILINX_AXIEMAC
 	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
 	select PHYLIB

include/configs/beaver.h

@@ -63,9 +63,6 @@
 #define CONFIG_PCI_PNP
 #define CONFIG_CMD_PCI
 
-/* PCI networking support */
-#define CONFIG_RTL8169
-
 /* General networking support */
 #define CONFIG_CMD_DHCP
 

include/configs/cardhu.h

@@ -66,9 +66,6 @@
 #define CONFIG_PCI_PNP
 #define CONFIG_CMD_PCI
 
-/* PCI networking support */
-#define CONFIG_RTL8169
-
 /* General networking support */
 #define CONFIG_CMD_DHCP
 

include/configs/chromebox_panther.h

@@ -10,6 +10,4 @@
 #include <configs/x86-common.h>
 #include <configs/x86-chromebook.h>
 
-#define CONFIG_RTL8169
-
 #endif	/* __CONFIG_H */

include/configs/jetson-tk1.h

@@ -60,9 +60,6 @@
 #define CONFIG_PCI_PNP
 #define CONFIG_CMD_PCI
 
-/* PCI networking support */
-#define CONFIG_RTL8169
-
 /* General networking support */
 #define CONFIG_CMD_DHCP
 

include/configs/minnowmax.h

@@ -20,7 +20,6 @@
 #define CONFIG_SMSC_LPC47M
 
 #define CONFIG_PCI_PNP
-#define CONFIG_RTL8169
 #define CONFIG_STD_DEVICES_SETTINGS     "stdin=usbkbd,vga,serial\0" \
 					"stdout=vga,serial\0" \
 					"stderr=vga,serial\0"

include/configs/p2371-2180.h

@@ -56,9 +56,6 @@
 #define CONFIG_PCI_PNP
 #define CONFIG_CMD_PCI
 
-/* PCI networking support */
-#define CONFIG_RTL8169
-
 /* General networking support */
 #define CONFIG_CMD_DHCP
 

include/configs/r7780mp.h

@@ -124,9 +124,6 @@
 #endif /* CONFIG_CMD_PCI */
 
 #if defined(CONFIG_CMD_NET)
-/*
-#define CONFIG_RTL8169
-*/
 /* AX88796L Support(NE2000 base chip) */
 #define CONFIG_DRIVER_AX88796L
 #define CONFIG_DRIVER_NE2000_BASE	0xA4100000

include/configs/sh7785lcr.h

@@ -148,9 +148,6 @@
 #define CONFIG_PCI_SYS_BUS	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_PCI_SYS_SIZE	CONFIG_SYS_SDRAM_SIZE
 
-/* Network device (RTL8169) support */
-#define CONFIG_RTL8169
-
 /* ENV setting */
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OVERWRITE	1

include/configs/trimslice.h

@@ -58,9 +58,6 @@
 #define CONFIG_PCI_PNP
 #define CONFIG_CMD_PCI
 
-/* PCI networking support */
-#define CONFIG_RTL8169
-
 /* General networking support */
 #define CONFIG_CMD_DHCP