powerpc: mpc85xx: Move CONFIG_FSL_LAW to Kconfig

Some header files have this macro defined conditionally and
redefined unconditionally. Remove all existing definitions.

Signed-off-by: York Sun <york.sun@nxp.com>

arch/powerpc/cpu/mpc85xx/Kconfig

@@ -323,117 +323,159 @@ endchoice
 
 config ARCH_B4420
 	bool
+	select FSL_LAW
 
 config ARCH_B4860
 	bool
+	select FSL_LAW
 
 config ARCH_BSC9131
 	bool
+	select FSL_LAW
 
 config ARCH_BSC9132
 	bool
+	select FSL_LAW
 
 config ARCH_C29X
 	bool
+	select FSL_LAW
 
 config ARCH_MPC8536
 	bool
+	select FSL_LAW
 
 config ARCH_MPC8540
 	bool
+	select FSL_LAW
 
 config ARCH_MPC8541
 	bool
+	select FSL_LAW
 
 config ARCH_MPC8544
 	bool
+	select FSL_LAW
 
 config ARCH_MPC8548
 	bool
+	select FSL_LAW
 
 config ARCH_MPC8555
 	bool
+	select FSL_LAW
 
 config ARCH_MPC8560
 	bool
+	select FSL_LAW
 
 config ARCH_MPC8568
 	bool
+	select FSL_LAW
 
 config ARCH_MPC8569
 	bool
+	select FSL_LAW
 
 config ARCH_MPC8572
 	bool
+	select FSL_LAW
 
 config ARCH_P1010
 	bool
+	select FSL_LAW
 
 config ARCH_P1011
 	bool
+	select FSL_LAW
 
 config ARCH_P1020
 	bool
+	select FSL_LAW
 
 config ARCH_P1021
 	bool
+	select FSL_LAW
 
 config ARCH_P1022
 	bool
+	select FSL_LAW
 
 config ARCH_P1023
 	bool
+	select FSL_LAW
 
 config ARCH_P1024
 	bool
+	select FSL_LAW
 
 config ARCH_P1025
 	bool
+	select FSL_LAW
 
 config ARCH_P2020
 	bool
+	select FSL_LAW
 
 config ARCH_P2041
 	bool
+	select FSL_LAW
 
 config ARCH_P3041
 	bool
+	select FSL_LAW
 
 config ARCH_P4080
 	bool
+	select FSL_LAW
 
 config ARCH_P5020
 	bool
+	select FSL_LAW
 
 config ARCH_P5040
 	bool
+	select FSL_LAW
 
 config ARCH_QEMU_E500
 	bool
 
 config ARCH_T1023
 	bool
+	select FSL_LAW
 
 config ARCH_T1024
 	bool
+	select FSL_LAW
 
 config ARCH_T1040
 	bool
+	select FSL_LAW
 
 config ARCH_T1042
 	bool
+	select FSL_LAW
 
 config ARCH_T2080
 	bool
+	select FSL_LAW
 
 config ARCH_T2081
 	bool
+	select FSL_LAW
 
 config ARCH_T4160
 	bool
+	select FSL_LAW
 
 config ARCH_T4240
 	bool
+	select FSL_LAW
+
+config FSL_LAW
+	bool
+	help
+		Use Freescale common code for Local Access Window
 
 config SECURE_BOOT
 	bool	"Secure Boot"

include/configs/B4860QDS.h

@@ -19,7 +19,6 @@
 #else
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x00201000
 #define CONFIG_SPL_TEXT_BASE		0xFFFD8000
 #define CONFIG_SPL_PAD_TO		0x40000
@@ -80,8 +79,6 @@
 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 #endif
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
-
 /* I2C bus multiplexer */
 #define I2C_MUX_PCA_ADDR                0x77
 

include/configs/BSC9131RDB.h

@@ -51,7 +51,6 @@
 #define CONFIG_FSL_IFC			/* Enable IFC Support */
 #define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
 #define CONFIG_TSEC_ENET
 #define CONFIG_ENV_OVERWRITE
 

include/configs/BSC9132QDS.h

@@ -103,7 +103,6 @@
 #define CONFIG_DOS_PARTITION
 #endif
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_TSEC_ENET /* ethernet */
 

include/configs/C29XPCIE.h

@@ -102,7 +102,6 @@
 #define CONFIG_DOS_PARTITION
 #endif
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
 #define CONFIG_TSEC_ENET
 #define CONFIG_ENV_OVERWRITE
 

include/configs/MPC8536DS.h

@@ -51,7 +51,6 @@
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE

include/configs/MPC8540ADS.h

@@ -36,7 +36,6 @@
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
 /*
  * sysclk for MPC85xx

include/configs/MPC8541CDS.h

@@ -25,8 +25,6 @@
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
-
 #define CONFIG_FSL_VIA
 
 #ifndef __ASSEMBLY__

include/configs/MPC8544DS.h

@@ -28,8 +28,6 @@
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
-
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */

include/configs/MPC8548CDS.h

@@ -35,7 +35,6 @@
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
 #define CONFIG_FSL_VIA
 

include/configs/MPC8555CDS.h

@@ -24,7 +24,6 @@
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
 #define CONFIG_FSL_VIA
 

include/configs/MPC8560ADS.h

@@ -34,7 +34,6 @@
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #undef CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 #define CONFIG_RESET_PHY_R	1	/* Call reset_phy() */
 
 /*

include/configs/MPC8568MDS.h

@@ -28,7 +28,6 @@
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_QE			/* Enable QE */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
 #ifndef __ASSEMBLY__
 extern unsigned long get_clock_freq(void);

include/configs/MPC8569MDS.h

@@ -26,7 +26,6 @@
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #define CONFIG_QE			/* Enable QE */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
 #ifndef __ASSEMBLY__
 extern unsigned long get_clock_freq(void);

include/configs/MPC8572DS.h

@@ -39,8 +39,6 @@
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
-
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 

include/configs/P1010RDB.h

@@ -19,7 +19,6 @@
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x11001000
 #define CONFIG_SPL_TEXT_BASE		0xD0001000
 #define CONFIG_SPL_PAD_TO		0x18000
@@ -45,7 +44,6 @@
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW         /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE			0x11001000
 #define CONFIG_SPL_TEXT_BASE			0xD0001000
 #define CONFIG_SPL_PAD_TO			0x18000
@@ -201,7 +199,6 @@
 #define CONFIG_DOS_PARTITION
 #endif
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
 #define CONFIG_TSEC_ENET
 #define CONFIG_ENV_OVERWRITE
 

include/configs/P1022DS.h

@@ -15,7 +15,6 @@
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x11001000
 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
 #define CONFIG_SPL_PAD_TO		0x20000
@@ -36,7 +35,6 @@
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW		/* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x11001000
 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
 #define CONFIG_SPL_PAD_TO		0x20000
@@ -115,8 +113,6 @@
 #define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
 #endif
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
-
 #define CONFIG_SYS_CLK_FREQ	get_board_sys_clk()
 #define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk()
 #define CONFIG_ICS307_REFCLK_HZ	33333000  /* ICS307 clock chip ref freq */

include/configs/P1023RDB.h

@@ -35,7 +35,6 @@
 #define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET	/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
-#define CONFIG_FSL_LAW		/* Use common FSL init code */
 
 #ifndef __ASSEMBLY__
 extern unsigned long get_clock_freq(void);

include/configs/P2041RDB.h

@@ -58,8 +58,6 @@
 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 #define CONFIG_SYS_DPAA_RMAN		/* RMan */
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
-
 #define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_SYS_NO_FLASH

include/configs/T102xQDS.h

@@ -28,7 +28,6 @@
 #define CONFIG_SYS_NUM_CPC		CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC			/* Enable IFC Support */
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_DEEP_SLEEP
@@ -42,7 +41,6 @@
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x00201000
 #define CONFIG_SPL_TEXT_BASE		0xFFFD8000
 #define CONFIG_SPL_PAD_TO		0x40000

include/configs/T102xRDB.h

@@ -28,7 +28,6 @@
 #define CONFIG_SYS_NUM_CPC		CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC			/* Enable IFC Support */
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
@@ -45,7 +44,6 @@
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x30001000
 #define CONFIG_SPL_TEXT_BASE		0xFFFD8000
 #define CONFIG_SPL_PAD_TO		0x40000

include/configs/T1040QDS.h

@@ -69,8 +69,6 @@
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
-
 #define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_SYS_NO_FLASH

include/configs/T104xRDB.h

@@ -24,7 +24,6 @@
 
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x30001000
 #define CONFIG_SPL_TEXT_BASE		0xFFFD8000
 #define CONFIG_SPL_PAD_TO		0x40000
@@ -180,8 +179,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
-
 #define CONFIG_ENV_OVERWRITE
 
 #ifndef CONFIG_SYS_NO_FLASH

include/configs/T208xQDS.h

@@ -41,7 +41,6 @@
 #define CONFIG_SYS_NUM_CPC	CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC		/* Enable IFC Support */
 #define CONFIG_FSL_CAAM		/* Enable SEC/CAAM */
-#define CONFIG_FSL_LAW		/* Use common FSL init code */
 #define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_RAMBOOT_PBL
@@ -49,7 +48,6 @@
 
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x00201000
 #define CONFIG_SPL_TEXT_BASE		0xFFFD8000
 #define CONFIG_SPL_PAD_TO		0x40000

include/configs/T208xRDB.h

@@ -34,7 +34,6 @@
 #define CONFIG_SYS_NUM_CPC	CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC		/* Enable IFC Support */
 #define CONFIG_FSL_CAAM		/* Enable SEC/CAAM */
-#define CONFIG_FSL_LAW		/* Use common FSL init code */
 #define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_RAMBOOT_PBL
@@ -42,7 +41,6 @@
 
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x00201000
 #define CONFIG_SPL_TEXT_BASE		0xFFFD8000
 #define CONFIG_SPL_PAD_TO		0x40000

include/configs/T4240QDS.h

@@ -24,7 +24,6 @@
 #else
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x00201000
 #define CONFIG_SPL_TEXT_BASE		0xFFFD8000
 #define CONFIG_SPL_PAD_TO		0x40000

include/configs/T4240RDB.h

@@ -23,7 +23,6 @@
 #else
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x00201000
 #define CONFIG_SPL_TEXT_BASE		0xFFFD8000
 #define CONFIG_SPL_PAD_TO		0x40000
@@ -85,8 +84,6 @@
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
-
 #define CONFIG_ENV_OVERWRITE
 
 /*

include/configs/UCP1020.h

@@ -124,8 +124,6 @@
 
 #define CONFIG_MP
 
-#define CONFIG_FSL_LAW
-
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_CMD_SATA

include/configs/controlcenterd.h

@@ -42,7 +42,6 @@
 
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENABLE_36BIT_PHYS
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
 
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_ADDR_MAP

include/configs/corenet_ds.h

@@ -69,8 +69,6 @@
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
-
 #define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_SYS_NO_FLASH

include/configs/cyrus.h

@@ -59,8 +59,6 @@
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
-
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_SYS_NO_FLASH

include/configs/km/kmp204x-common.h

@@ -46,8 +46,6 @@
 
 #define CONFIG_SYS_DPAA_RMAN		/* RMan */
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
-
 /* Environment in SPI Flash */
 #define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_ENV_IS_IN_SPI_FLASH

include/configs/p1_p2_rdb_pc.h

@@ -174,7 +174,6 @@
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x11001000
 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
 #define CONFIG_SPL_PAD_TO		0x20000
@@ -195,7 +194,6 @@
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW         /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x11001000
 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
 #define CONFIG_SPL_PAD_TO		0x20000
@@ -274,7 +272,6 @@
 #define CONFIG_FSL_PCIE_RESET	/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_LAW
 #define CONFIG_TSEC_ENET	/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 

include/configs/p1_twr.h

@@ -52,7 +52,6 @@
 #define CONFIG_FSL_PCIE_RESET	/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_LAW
 #define CONFIG_TSEC_ENET	/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 

include/configs/sbc8548.h

@@ -69,8 +69,6 @@
 
 #define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
 
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
-
 /*
  * Below assumes that CCB:SYSCLK remains unchanged at 6:1 via SW2:[1-4]
  */

include/configs/socrates.h

@@ -31,8 +31,6 @@
 #define CONFIG_MISC_INIT_R	1	/* Call misc_init_r		*/
 #define CONFIG_BOARD_EARLY_INIT_R 1	/* Call board_early_init_r	*/
 
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
-
 /*
  * Only possible on E500 Version 2 or newer cores.
  */

include/configs/t4qds.h

@@ -40,8 +40,6 @@
 #define CONFIG_SRIO1			/* SRIO port 1 */
 #define CONFIG_SRIO2			/* SRIO port 2 */
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
-
 #define CONFIG_ENV_OVERWRITE
 
 /*

include/configs/xpedite520x.h

@@ -30,7 +30,6 @@
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
 /*
  * DDR config

include/configs/xpedite537x.h

@@ -31,7 +31,6 @@
 #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 #define CONFIG_FSL_ELBC		1
 
 /*

include/configs/xpedite550x.h

@@ -32,7 +32,6 @@
 #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 #define CONFIG_FSL_ELBC		1
 
 /*