usb: USB download gadget and functions config options coherent naming

This introduces a coherent scheme for naming USB download gadget and functions
config options. The download USB gadget config option is moved to
CONFIG_USB_GADGET_DOWNLOAD for better consistency with other gadgets and each
function's config option is moved to a CONFIG_USB_FUNCTION_ prefix.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>

Test HW: Odroid_XU3 (Exynos5422), trats (Exynos4210)

README

@@ -1671,7 +1671,7 @@ The following options need to be configured:
 		key for the Replay Protection Memory Block partition in eMMC.
 
 - USB Device Firmware Update (DFU) class support:
-		CONFIG_DFU_FUNCTION
+		CONFIG_USB_FUNCTION_DFU
 		This enables the USB portion of the DFU USB class
 
 		CONFIG_CMD_DFU

board/samsung/common/Makefile

@@ -6,7 +6,7 @@
 #
 
 obj-$(CONFIG_SOFT_I2C_MULTI_BUS) += multi_i2c.o
-obj-$(CONFIG_USBDOWNLOAD_GADGET) += gadget.o
+obj-$(CONFIG_USB_GADGET_DOWNLOAD) += gadget.o
 obj-$(CONFIG_MISC_COMMON) += misc.o
 
 ifndef CONFIG_SPL_BUILD

board/siemens/common/factoryset.c

@@ -144,7 +144,7 @@ int factoryset_read_eeprom(int i2c_addr)
 	unsigned char eeprom_buf[0x3c00], hdr[4], buf[MAX_STRING_LENGTH];
 	unsigned char *cp, *cp1;
 
-#if defined(CONFIG_DFU_FUNCTION)
+#if defined(CONFIG_USB_FUNCTION_DFU)
 	factory_dat.usb_vendor_id = CONFIG_G_DNL_VENDOR_NUM;
 	factory_dat.usb_product_id = CONFIG_G_DNL_PRODUCT_NUM;
 #endif
@@ -202,7 +202,7 @@ int factoryset_read_eeprom(int i2c_addr)
 		cp1 += 3;
 	}
 
-#if defined(CONFIG_DFU_FUNCTION)
+#if defined(CONFIG_USB_FUNCTION_DFU)
 	/* read vid and pid for dfu mode */
 	if (0 <= get_factory_record_val(cp, size, (uchar *)"USBD1",
 					(uchar *)"vid", buf,

doc/README.android-fastboot

@@ -33,7 +33,7 @@ Board specific
 The fastboot gadget relies on the USB download gadget, so the following
 options must be configured:
 
-CONFIG_USBDOWNLOAD_GADGET
+CONFIG_USB_GADGET_DOWNLOAD
 CONFIG_G_DNL_VENDOR_NUM
 CONFIG_G_DNL_PRODUCT_NUM
 CONFIG_G_DNL_MANUFACTURER

drivers/dfu/Makefile

@@ -5,7 +5,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-$(CONFIG_DFU_FUNCTION) += dfu.o
+obj-$(CONFIG_USB_FUNCTION_DFU) += dfu.o
 obj-$(CONFIG_DFU_MMC) += dfu_mmc.o
 obj-$(CONFIG_DFU_NAND) += dfu_nand.o
 obj-$(CONFIG_DFU_RAM) += dfu_ram.o

drivers/usb/gadget/Makefile

@@ -15,10 +15,10 @@ obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o
 obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG_PHY) += s3c_udc_otg_phy.o
 obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
 obj-$(CONFIG_CI_UDC)	+= ci_udc.o
-obj-$(CONFIG_THOR_FUNCTION) += f_thor.o
-obj-$(CONFIG_USBDOWNLOAD_GADGET) += g_dnl.o
-obj-$(CONFIG_DFU_FUNCTION) += f_dfu.o
-obj-$(CONFIG_USB_GADGET_MASS_STORAGE) += f_mass_storage.o
+obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o
+obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o
+obj-$(CONFIG_USB_FUNCTION_DFU) += f_dfu.o
+obj-$(CONFIG_USB_FUNCTION_MASS_STORAGE) += f_mass_storage.o
 obj-$(CONFIG_CMD_FASTBOOT) += f_fastboot.o
 endif
 ifdef CONFIG_USB_ETHER

include/configs/am335x_evm.h

@@ -287,7 +287,7 @@
 #define CONFIG_MUSB_PIO_ONLY
 #define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_USB_GADGET
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_MUSB_HOST
@@ -344,7 +344,7 @@
 
 /* USB Device Firmware Update support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_DFU_FUNCTION
+#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_MMC
 #define CONFIG_CMD_DFU
 #define DFU_ALT_INFO_MMC \

include/configs/am43xx_evm.h

@@ -128,7 +128,7 @@
 #define CONFIG_USB_DWC3_GADGET
 
 #define CONFIG_USB_GADGET
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_VBUS_DRAW 2
 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
 #define CONFIG_G_DNL_VENDOR_NUM 0x0403
@@ -138,7 +138,7 @@
 
 #ifndef CONFIG_SPL_BUILD
 /* USB Device Firmware Update support */
-#define CONFIG_DFU_FUNCTION
+#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_RAM
 #define CONFIG_CMD_DFU
 

include/configs/bav335x.h

@@ -444,7 +444,7 @@ DEFAULT_LINUX_BOOT_ENV \
 #define CONFIG_MUSB_PIO_ONLY
 #define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_USB_GADGET
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_MUSB_HOST
@@ -472,7 +472,7 @@ DEFAULT_LINUX_BOOT_ENV \
 
 #ifdef CONFIG_MUSB_GADGET
 #define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
 
 /* USB TI's IDs */
 #define CONFIG_G_DNL_VENDOR_NUM 0x0451
@@ -494,7 +494,7 @@ DEFAULT_LINUX_BOOT_ENV \
 
 /* USB Device Firmware Update support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_DFU_FUNCTION
+#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_MMC
 #define CONFIG_CMD_DFU
 #define DFU_ALT_INFO_MMC \

include/configs/colibri_vf.h

@@ -257,16 +257,16 @@
 #define CONFIG_G_DNL_PRODUCT_NUM         CONFIG_TRDX_PID_COLIBRI_VF50
 
 /* USB DFU */
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_CMD_DFU
-#define CONFIG_DFU_FUNCTION
+#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_NAND
 #define CONFIG_DFU_MMC
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
 
 /* USB Storage */
 #define CONFIG_USB_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_CMD_USB_MASS_STORAGE
 
 /* Enable SPI support */

include/configs/dra7xx_evm.h

@@ -190,7 +190,7 @@
 #define CONFIG_USB_DWC3_GADGET
 
 #define CONFIG_USB_GADGET
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_VBUS_DRAW 2
 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
 #define CONFIG_G_DNL_VENDOR_NUM 0x0451
@@ -198,7 +198,7 @@
 #define CONFIG_USB_GADGET_DUALSPEED
 
 /* USB Device Firmware Update support */
-#define CONFIG_DFU_FUNCTION
+#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_RAM
 #define CONFIG_CMD_DFU
 

include/configs/exynos4-common.h

@@ -28,13 +28,13 @@
 #define CONFIG_CMD_GPT
 
 /* USB Composite download gadget - g_dnl */
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
 
 /* TIZEN THOR downloader support */
 #define CONFIG_CMD_THOR_DOWNLOAD
-#define CONFIG_THOR_FUNCTION
+#define CONFIG_USB_FUNCTION_THOR
 
-#define CONFIG_DFU_FUNCTION
+#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_MMC
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
 #define DFU_DEFAULT_POLL_TIMEOUT 300
@@ -57,7 +57,7 @@
 #define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 #define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
 
 /* Common environment variables */
 #define CONFIG_EXTRA_ENV_ITB \

include/configs/gw_ventana.h

@@ -205,8 +205,8 @@
 /* USB Mass Storage Gadget */
 #define CONFIG_USB_GADGET
 #define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_VBUS_DRAW    2
 
 /* Netchip IDs */

include/configs/mx6sabre_common.h

@@ -217,8 +217,8 @@
 
 #define CONFIG_USB_GADGET
 #define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 #define CONFIG_G_DNL_VENDOR_NUM		0x0525

include/configs/nitrogen6x.h

@@ -337,8 +337,8 @@
 
 #define CONFIG_USB_GADGET
 #define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 /* Netchip IDs */

include/configs/odroid_xu3.h

@@ -60,10 +60,10 @@
 #define CONFIG_G_DNL_VENDOR_NUM		0x04E8
 #define CONFIG_G_DNL_PRODUCT_NUM	0x6601
 #define CONFIG_G_DNL_MANUFACTURER	"Samsung"
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
 
 /* DFU */
-#define CONFIG_DFU_FUNCTION
+#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_MMC
 #define CONFIG_CMD_DFU
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_32M
@@ -72,13 +72,13 @@
 /* THOR */
 #define CONFIG_G_DNL_THOR_VENDOR_NUM	CONFIG_G_DNL_VENDOR_NUM
 #define CONFIG_G_DNL_THOR_PRODUCT_NUM	0x685D
-#define CONFIG_THOR_FUNCTION
+#define CONFIG_USB_FUNCTION_THOR
 #define CONFIG_CMD_THOR_DOWNLOAD
 
 /* UMS */
 #define CONFIG_G_DNL_UMS_VENDOR_NUM	0x0525
 #define CONFIG_G_DNL_UMS_PRODUCT_NUM	0xA4A5
-#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_CMD_USB_MASS_STORAGE
 
 /* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */

include/configs/omap3_beagle.h

@@ -68,7 +68,7 @@
 #define CONFIG_USB_ETHER_RNDIS
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_VBUS_DRAW	0
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_G_DNL_VENDOR_NUM		0x0451
 #define CONFIG_G_DNL_PRODUCT_NUM	0xd022
 #define CONFIG_G_DNL_MANUFACTURER	"TI"

include/configs/s5p_goni.h

@@ -68,15 +68,15 @@
 #define CONFIG_CMD_GPT
 
 /* USB Composite download gadget - g_dnl */
-#define CONFIG_USBDOWNLOAD_GADGET
-#define CONFIG_DFU_FUNCTION
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_MMC
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
 #define DFU_DEFAULT_POLL_TIMEOUT 300
 
 /* TIZEN THOR downloader support */
 #define CONFIG_CMD_THOR_DOWNLOAD
-#define CONFIG_THOR_FUNCTION
+#define CONFIG_USB_FUNCTION_THOR
 
 /* USB Samsung's IDs */
 #define CONFIG_G_DNL_VENDOR_NUM 0x04E8
@@ -275,7 +275,7 @@
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW 2
 #define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
 
 #define CONFIG_OF_LIBFDT
 

include/configs/siemens-am33x-common.h

@@ -249,7 +249,7 @@
 #endif /* CONFIG_MUSB_GADGET */
 
 #define CONFIG_USB_GADGET
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
 
 /* USB DRACO ID as default */
 #define CONFIG_USBD_HS
@@ -258,7 +258,7 @@
 #define CONFIG_G_DNL_MANUFACTURER "Siemens AG"
 
 /* USB Device Firmware Update support */
-#define CONFIG_DFU_FUNCTION
+#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_NAND
 #define CONFIG_CMD_DFU
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(1 << 20)

include/configs/socfpga_common.h

@@ -243,10 +243,10 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 /* USB Composite download gadget - g_dnl */
-#define CONFIG_USBDOWNLOAD_GADGET
-#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
 
-#define CONFIG_DFU_FUNCTION
+#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_MMC
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(32 * 1024 * 1024)
 #define DFU_DEFAULT_POLL_TIMEOUT	300

include/configs/tbs2910.h

@@ -133,10 +133,10 @@
 #define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
 #define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW	0
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_G_DNL_VENDOR_NUM		0x0525
 #define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
 #define CONFIG_G_DNL_MANUFACTURER	"TBS"

include/configs/tegra-common-usb-gadget.h

@@ -18,12 +18,12 @@
 #define CONFIG_G_DNL_VENDOR_NUM 0x0955
 #define CONFIG_G_DNL_PRODUCT_NUM 0x701A
 #define CONFIG_G_DNL_MANUFACTURER "NVIDIA"
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
 /* USB mass storage protocol */
-#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_CMD_USB_MASS_STORAGE
 /* DFU protocol */
-#define CONFIG_DFU_FUNCTION
+#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 * 1024 * 1024)
 #define CONFIG_CMD_DFU
 #ifdef CONFIG_MMC

include/configs/warp.h

@@ -80,8 +80,8 @@
 
 #define CONFIG_USB_GADGET
 #define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 #define CONFIG_G_DNL_VENDOR_NUM		0x0525
@@ -89,7 +89,7 @@
 #define CONFIG_G_DNL_MANUFACTURER	"FSL"
 
 #define CONFIG_CMD_DFU
-#define CONFIG_DFU_FUNCTION
+#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_MMC
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
 #define DFU_DEFAULT_POLL_TIMEOUT 300

include/configs/zynq-common.h

@@ -110,10 +110,10 @@
 # define CONFIG_CI_UDC           /* ChipIdea CI13xxx UDC */
 # define CONFIG_USB_GADGET
 # define CONFIG_USB_GADGET_DUALSPEED
-# define CONFIG_USBDOWNLOAD_GADGET
+# define CONFIG_USB_GADGET_DOWNLOAD
 # define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x600000
 # define DFU_DEFAULT_POLL_TIMEOUT	300
-# define CONFIG_DFU_FUNCTION
+# define CONFIG_USB_FUNCTION_DFU
 # define CONFIG_DFU_RAM
 # define CONFIG_USB_GADGET_VBUS_DRAW	2
 # define CONFIG_G_DNL_VENDOR_NUM	0x03FD
@@ -123,7 +123,7 @@
 # define CONFIG_USB_CABLE_CHECK
 # define CONFIG_CMD_DFU
 # define CONFIG_CMD_THOR_DOWNLOAD
-# define CONFIG_THOR_FUNCTION
+# define CONFIG_USB_FUNCTION_THOR
 # define DFU_ALT_INFO_RAM \
 	"dfu_ram_info=" \
 	"set dfu_alt_info " \