| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253 |
- NODEID = 00 E0 4C 68 00 01
- ;ENDID = 00 E0 4C 68 FF FF
- ;VID = 10 EC
- ;DID = 81 68
- SVID = 10 EC
- SMID = 01 23
- ;Do not change following parameters without Realtek approval
- CONFIG0 = 00
- CONFIG1 = CF
- CONFIGx = 3C
- CONFIG3 = 60
- CONFIG4 = 14
- CONFIG5 = 82
- ;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
- ;CONFIG5 = 8A
- PMC = C3 FF
- ROMBAR = 00
- ;LEDCFG = High-Byte(19H) Low-Byte(18H)
- ;LEDCFG = 0C A9
- ;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
- PREFETCHABLE = 04
- ROMCONF = 3F
- ;Bit 7-6 Boot Protocol
- ; 00 ==> PXE protocol
- ; 01 ==> RPL protocol
- ;Bit 5-4 Boot order (method)
- ; 00 ==> ROM disable
- ; 01 ==> Int 18h
- ; 10 ==> Int 19h
- ; 11 ==> PnP/BEV(BBS)
- ;Bit 3 Show Config Message
- ; 0 ==> Enable
- ; 1 ==> Disable
- ;Bit 2 Shift+F10 Menu Entry
- ; 0 ==> Enable
- ; 1 ==> Disable
- ;Bit 1-0 Show Config Time
- ; 00 ==> 3 Seconds
- ; 01 ==> 5 Seconds
- ; 10 ==> 1 Seconds
- ; 11 ==> 0 Second
- ;Serial Number in PCI Config Space
- SN = 00 E0 4C 68 00 00 00 01
- ;LANCFG
- ;BIT 1:PHY Disable
- ;BIT 31:Clear LANCFG
- ;LANCFG = 00 00 00 00
- VERSION = 1.031
|
