8105EF.cfg 1.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748
  1. NODEID = 00 E0 4C 36 00 01
  2. ;ENDID = 00 E0 4C 36 FF FF
  3. ;VID = 10 EC
  4. ;DID = 81 36
  5. SVID = 10 EC
  6. SMID = 01 23
  7. ;Do not change following parameters without Realtek approval
  8. CONFIG0 = 00
  9. CONFIG1 = 0F
  10. CONFIGx = 1C
  11. CONFIG3 = 60
  12. CONFIG4 = 14
  13. CONFIG5 = 82
  14. ;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
  15. ;CONFIG5 = 8A
  16. PMC = C3 FF
  17. ROMBAR = 00
  18. ;LEDCFG = High-Byte(19H) Low-Byte(18H)
  19. LEDCFG = 98 CA
  20. ;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
  21. PREFETCHABLE = 04
  22. ROMCONF = 3F
  23. ;Bit 7-6 Boot Protocol
  24. ; 00 ==> PXE protocol
  25. ; 01 ==> RPL protocol
  26. ;Bit 5-4 Boot order (method)
  27. ; 00 ==> ROM disable
  28. ; 01 ==> Int 18h
  29. ; 10 ==> Int 19h
  30. ; 11 ==> PnP/BEV(BBS)
  31. ;Bit 3 Show Config Message
  32. ; 0 ==> Enable
  33. ; 1 ==> Disable
  34. ;Bit 2 Shift+F10 Menu Entry
  35. ; 0 ==> Enable
  36. ; 1 ==> Disable
  37. ;Bit 1-0 Show Config Time
  38. ; 00 ==> 3 Seconds
  39. ; 01 ==> 5 Seconds
  40. ; 10 ==> 1 Seconds
  41. ; 11 ==> 0 Second
  42. ;Serial Number in PCI Config Space
  43. SN = 00 E0 4C 36 00 00 00 01
  44. VERSION = 1.031