| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465 |
- NODEID = 00 E0 4C 36 00 01
- ;ENDID = 00 E0 4C 36 FF FF
- VID = 10 EC
- DID = 81 36
- SVID = 10 EC
- SMID = 01 23
- ;Do not change following parameters without Realtek approval
- CONFIG0 = 00
- CONFIG1 = 0F
- CONFIGx = 1C
- CONFIG3 = 60
- CONFIG4 = 14
- CONFIG5 = 82
- ;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
- ;CONFIG5 = 8A
- PMC = C3 FF
- ROMBAR = 00
- ;LEDCFG = High-Byte(19H) Low-Byte(18H)
- LEDCFG = 98 CA
- ROMCONF = 3F
- ;Bit 7-6 Boot Protocol
- ; 00 ==> PXE protocol
- ; 01 ==> RPL protocol
- ;Bit 5-4 Boot order (method)
- ; 00 ==> ROM disable
- ; 01 ==> Int 18h
- ; 10 ==> Int 19h
- ; 11 ==> PnP/BEV(BBS)
- ;Bit 3 Show Config Message
- ; 0 ==> Enable
- ; 1 ==> Disable
- ;Bit 2 Shift+F10 Menu Entry
- ; 0 ==> Enable
- ; 1 ==> Disable
- ;Bit 1-0 Show Config Time
- ; 00 ==> 3 Seconds
- ; 01 ==> 5 Seconds
- ; 10 ==> 1 Seconds
- ; 11 ==> 0 Second
- ;Serial Number in PCI Config Space
- SN = 00 E0 4C 36 00 00 00 01
- ;PCI-E Parameter (Do not change without Realtek approval)
- C_PCIE0 = 04 01
- ;0AH~0BH
- C_PCIE1 = C0 8C 80 02 00 00 11 3C 07 00 10 20
- ;1AH~25H
- C_PCIE2 = 76 00 63 01 01 FF 13 AA 03 02 20
- ;26H~2BH 2DH~31H
- C_PCIE3 = 80 02 00 20 04 40 20 00 04 40 20 00 00 20
- ;34H~3EH 40H~42H
- C_PCIE4 = 60 00 0A 00 00 00
- ;46H~49H 52~53H
- C_EPHY = B9 6A 98 AC 6B 75 80
- ;43H~45H 54H~57H
- D_EPHY = 8D 75 7B 01
- ;58H~5BH
- E0_EPHY = 48
- ;5EH
- VERSION = 1.031
|
