Support RK3588 Orange Pi 5 Plus

.gitignore

@@ -42,6 +42,8 @@ external/cache/sources/orangepi-test
 external/cache/sources/rk3588_packages*
 external/cache/sources/rk-rootfs-build*
 external/cache/sources/orangepi-firmware*
+external/cache/sources/wiringOP
+external/cache/sources/wiringOP-Python
 external/cache/sources/rk3399_gst_xserver_libs
 external/cache/sources/arm-trusted-firmware-sunxi-mainline
 external/cache/debs/arm64/balena-etcher-electron_1.7.9+5945ab1f_arm64.deb

external/cache/sources/linuxpg/68DPSPI.cfg

@@ -1,39 +0,0 @@
-; RTL8168DP Configuration file
-; 2009/04/01
-;
-; Out of band MAC ID
-NODEID = 00 E0 4C 68 00 20
-;
-; user login name
-USERNAME = Administrator
-; user password, password length has to be 16 bytes
-; default password 'Realtek'
- PASSWORD = 52 65 61 6c 74 65 6b 00 00 00 00 00 00 00 00 00
-; operation role
-; Administrator : 01
-; Operator: 02
-; Guest : 03
-ROLE = 01
-; OOB IP address
-IP = 192.168.0.10
-; OOB subnet mask
-SUBNET = 255.255.255.0
-; OOB gateway IP address
-GATEWAY = 192.168.0.254
-; OOB DNS server ip address
-DNS = 192.168.0.1
-; ASP console IP address
-ASFIP = 192.168.0.3
-; ASF function setting
-; enable : ON
-; disable : OFF
-ASFON = ON
-; IPV4 DHCP setting
-; enable : ON
-; disable : OFF
-DHCPIPV4 = OFF
-HOSTNAME = hostnameho
-; hostname suffix
-; enable : ON
-; disable : OFF
-HN_SUFFIX = ON

external/cache/sources/linuxpg/68EPSPI.cfg

@@ -1,36 +0,0 @@
-; RTL8168EP Configuration file
-; 2018/03/30
-;
-; user login name
-USERNAME = Administrator
-; user password, password length has to be 16 bytes
-; default password 'Realtek'
-PASSWORD = 52 65 61 6c 74 65 6b 00 00 00 00 00 00 00 00 00
-; operation role
-;  Administrator : 01
-;  Operator: 02
-;  Guest : 03
-; ROLE = 01
-; OOB IP address
-IP = 192.168.0.10
-; OOB subnet mask
-SUBNET = 255.255.255.0
-; OOB gateway IP address
-GATEWAY = 192.168.0.254
-; OOB DNS server ip address
-; DNS = 192.168.0.1
-; ASP console IP address
-; ASFIP = 192.168.0.3
-; ASF function setting
-; enable : ON
-; disable : OFF
-; ASFON = ON
-; IPV4 DHCP setting
-; enable : ON
-; disable : OFF
-; DHCPIPV4 = OFF
-HOSTNAME = DASHOOB
-HN_SUFFIX = ON
-;SARP_ADDR = C8
-;USB_OTG = OFF
-;WEBPAGE = OFF

external/cache/sources/linuxpg/68FPHSPI.cfg

@@ -1,36 +0,0 @@
-; RTL8168FPH Configuration file
-; 2009/04/01
-;
-; user login name
-USERNAME = Administrator
-; user password, password length has to be 16 bytes
-; default password 'Realtek'
-PASSWORD = 52 65 61 6c 74 65 6b 00 00 00 00 00 00 00 00 00
-; operation role
-; Administrator : 01
-; Operator: 02
-; Guest : 03
-;ROLE = 01
-; OOB IP address
-IP = 192.168.0.10
-; OOB subnet mask
-SUBNET = 255.255.255.0
-; OOB gateway IP address
-GATEWAY = 192.168.0.254
-; OOB DNS server ip address
-;DNS = 192.168.0.1
-; ASP console IP address
-;ASFIP = 192.168.0.3
-; ASF function setting
-; enable : ON
-; disable : OFF
-;ASFON = ON
-; IPV4 DHCP setting
-; enable : ON
-; disable : OFF
-; DHCPIPV4 = OFF
-HOSTNAME = DASHOOB
-HN_SUFFIX = ON
-;SARP_ADDR = C8
-;USB_OTG = OFF
-;VNC_CONFIG = ORIGIN/PINCODE

external/cache/sources/linuxpg/68FPSPI.cfg

@@ -1,37 +0,0 @@
-; RTL8168FP Configuration file
-; 2009/04/01
-;
-; user login name
-USERNAME = Administrator
-; user password, password length has to be 16 bytes
-; default password 'Realtek'
-PASSWORD = 52 65 61 6c 74 65 6b 00 00 00 00 00 00 00 00 00
-; operation role
-; Administrator : 01
-; Operator: 02
-; Guest : 03
-;ROLE = 01
-; OOB IP address
-IP = 192.168.0.10
-; OOB subnet mask
-SUBNET = 255.255.255.0
-; OOB gateway IP address
-GATEWAY = 192.168.0.254
-; OOB DNS server ip address
-;DNS = 192.168.0.1
-; ASP console IP address
-;ASFIP = 192.168.0.3
-; ASF function setting
-; enable : ON
-; disable : OFF
-;ASFON = ON
-; IPV4 DHCP setting
-; enable : ON
-; disable : OFF
-;DHCPIPV4 = OFF
-HOSTNAME = DASHOOB
-HN_SUFFIX = ON
-;SARP_ADDR = C8
-;USB_OTG = OFF
-;VNC_CONFIG = ORIGIN/PINCODE
-;WEBPAGE = OFF

external/cache/sources/linuxpg/8100E.cfg

@@ -1,29 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-VID = 10 EC
-DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 00
-CONFIG3 = 60
-CONFIG4 = 00
-CONFIG5 = 03
-PMC = C2 F7
-ROMBAR = 00
-ROMCONF = 3F
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-
-;PCI-E Parameter
-PCIE1= 04 01 42 63 7E 00 00 04
-PCIE2= FF FF FF FF FF FF 1F
-PCIE3= 00 47 10 F0 F0 01 BF 01 00 00 60 00 00
-;0AH,0BH,18H,1A~1EH
-;28H~2EH
-;30H~31H, 34H~3EH
-VERSION = 1.031

external/cache/sources/linuxpg/8100E.map

@@ -1,8 +0,0 @@
-29 81 EC 10 23 01 EC 10 36 81 04 01 00 60 00 E0
-4C 36 00 00 00 CF C2 F7 42 00 63 7E 00 00 04 03
-00 E0 4C 36 00 00 00 01 FF FF FF FF FF FF 1F 00
-00 47 D5 B5 10 F0 F0 01 BF 01 00 00 60 00 00 3F
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

external/cache/sources/linuxpg/8101E.cfg

@@ -1,29 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-VID = 10 EC
-DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 20
-CONFIG3 = 60
-CONFIG4 = 00
-CONFIG5 = 03
-PMC = C2 F7
-ROMBAR = 00
-ROMCONF = 3F
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-
-;PCI-E Parameter
-PCIE1= 04 01 42 60 7E 00 00 04
-PCIE2= FF FF FF FF FF FF 1F
-PCIE3= 00 47 30 F0 F0 00 2F 00 00 00 60 00 00
-;0AH,0BH,18H,1A~1E
-;28H~2EH
-;30H~31H, 34H~3EH
-VERSION = 1.031

external/cache/sources/linuxpg/8101E.map

@@ -1,8 +0,0 @@
-29 81 EC 10 36 81 EC 10 23 01 04 01 20 60 00 E0
-4C 36 00 00 00 CF C2 F7 42 00 60 7E 00 00 04 03
-00 E0 4C 36 00 00 00 01 FF FF FF FF FF FF 1F 00
-00 47 5A E1 30 F0 F0 00 2F 00 00 00 60 00 00 3F
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

external/cache/sources/linuxpg/8102E.cfg

@@ -1,56 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-VID = 10 EC
-DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = 0F
-CONFIGx = 3C
-CONFIG3 = 62
-CONFIG4 = 14
-CONFIG5 = 02
-PMC = C3 FF
-ROMBAR = 00
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-
-;PCI-E Parameter
-C_PCIE0 = 04 01
-;0AH~0BH
-C_PCIE1 = c1 86 80 02 00 00 11 3c 07 00 10 20
-;1AH~25H
-C_PCIE2 = 76 00 63 01 01 FF    27 AA 03 02 20
-;26H~2BH 2DH~31H
-C_PCIE3 = 80 02 00 20 10 00 21 00 10 00 21    00 00 80
-;34H~3EH 40H~42H
-C_PCIE4 = 80 00 20 00   00 00
-;46H~49H  52~53H
-C_EPHY = 70 22 1D     AF 6B 35 00
-;43H~45H 54H~57H
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8102E.map

@@ -1,32 +0,0 @@
-29 81 EC 10 36 81 EC 10 23 01 04 01 3C 62 00 E0
-4C 36 00 00 00 0F C3 FF 14 02 C1 86 80 02 00 00
-11 3C 07 00 10 20 76 00 63 01 01 FF 00 27 AA 03
-02 20 38 AC 80 02 00 20 10 00 21 00 10 00 21 3F
-00 00 80 70 22 1D 80 00 20 00 E0 00 36 4C 00 00
-01 00 00 00 AF 6B 35 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

external/cache/sources/linuxpg/8102EF.cfg

@@ -1,44 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-;VID = 10 EC
-;DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = 0F
-;CONFIGx = 3C
-CONFIG3 = 62
-CONFIG4 = 14
-;CONFIG5 = 02
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-LEDCFG = 00 00
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-VERSION = 1.031

external/cache/sources/linuxpg/8103E.cfg

@@ -1,56 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-VID = 10 EC
-DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = 0F
-CONFIGx = 3C
-CONFIG3 = 60
-CONFIG4 = 14
-CONFIG5 = 02
-PMC = C3 FF
-ROMBAR = 00
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-
-;PCI-E Parameter
-C_PCIE0 = 04 01
-;0AH~0BH
-C_PCIE1 = c1 86 80 02 00 00 11 3c 07 00 10 20
-;1AH~25H
-C_PCIE2 = 76 00 63 01 01 FF    27 AA 03 02 20
-;26H~2BH 2DH~31H
-C_PCIE3 = 80 02 00 20 10 00 21 00 10 00 21    00 00 80
-;34H~3EH 40H~42H
-C_PCIE4 = 80 00 20 00   00 00
-;46H~49H  52~53H
-C_EPHY = 71 22 98     AF 6B 39 35
-;43H~45H 54H~57H
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8103E.map

@@ -1,32 +0,0 @@
-29 81 EC 10 36 81 EC 10 23 01 04 01 3C 60 00 E0
-4C 36 00 00 00 0F C3 FF 14 02 C1 86 80 02 00 00
-11 3C 07 00 10 20 76 00 63 01 01 FF 00 27 AA 03
-02 20 38 AC 80 02 00 20 10 00 21 00 10 00 21 3F
-00 00 80 71 22 98 80 00 20 00 E0 00 36 4C 00 00
-01 00 00 00 AF 6B 39 35 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

external/cache/sources/linuxpg/8103EF.cfg

@@ -1,47 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-;VID = 10 EC
-;DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = 0F
-;CONFIGx = 3C
-CONFIG3 = 60
-CONFIG4 = 14
-;CONFIG5 = 02
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-LEDCFG = 00 00
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;EPHY = Address HIGH_BYTE LOW_BYTE ...
-;EPHY = 03 00 FB
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-VERSION = 1.031

external/cache/sources/linuxpg/8103EL.cfg

@@ -1,56 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;EndID = 00 E0 4C 36 FF FF
-VID = 10 EC
-DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = 0F
-CONFIGx = 3C
-CONFIG3 = 62
-CONFIG4 = 14
-CONFIG5 = 82
-PMC = C3 FF
-ROMBAR = 00
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-
-;PCI-E Parameter
-C_PCIE0 = 04 01
-;0AH~0BH
-C_PCIE1 = c1 86 80 02 00 00 11 3c 07 00 10 20
-;1AH~25H
-C_PCIE2 = 76 00 63 01 01 FF    27 AA 03 02 20
-;26H~2BH 2DH~31H
-C_PCIE3 = 80 02 00 20 10 00 21 00 10 00 21    00 00 80
-;34H~3EH 40H~42H
-C_PCIE4 = 80 00 20 00   00 00
-;46H~49H  52~53H
-C_EPHY = 71 22 98     AF 6B 39 35
-;43H~45H 54H~57H
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8103EL.map

@@ -1,8 +0,0 @@
-29 81 EC 10 36 81 EC 10 23 01 04 01 3C 62 00 E0
-4C 36 00 01 00 0F C3 FF 14 82 C1 86 80 02 00 00
-11 3C 07 00 10 20 76 00 63 01 01 FF 00 27 AA 03
-02 20 54 9E 80 02 00 20 10 00 21 00 10 00 21 3F
-00 00 80 71 22 98 80 00 20 00 E0 00 36 4C 00 00
-01 00 00 00 AF 6B 39 35 FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

external/cache/sources/linuxpg/8103ELEF.cfg

@@ -1,47 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-;VID = 10 EC
-;DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = 0F
-;CONFIGx = 3C
-CONFIG3 = 62
-CONFIG4 = 14
-CONFIG5 = 82
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-LEDCFG = 00 00
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;EPHY = Address HIGH_BYTE LOW_BYTE ...
-;EPHY = 03 00 FB
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-VERSION = 1.031

external/cache/sources/linuxpg/8104E.cfg

@@ -1,60 +0,0 @@
-NODEID = 00 E0 4C 37 00 01
-;ENDID = 00 E0 4C 37 FF FF
-VID = 10 EC
-DID = 81 37
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 9C
-CONFIG3 = 62
-CONFIG4 = 04
-CONFIG5 = 02
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-LEDCFG = 98 CA
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 37 00 00 00 01
-
-;PCI-E Parameter (Do not change without Realtek approval)
-C_PCIE0 = 04 01
-;0AH~0BH
-C_PCIE1 = c0 8C 80 02 00 00 11 3c 07 00 10 20
-;1AH~25H
-C_PCIE2 = 76 00 63 01 01 FF    27 AA 03 02 20
-;26H~2BH 2DH~31H
-C_PCIE3 = 80 02 00 20 04 40 20 00 04 40 20   00 00 20
-;34H~3EH 40H~42H
-C_PCIE4 = 60 00 0A 00   00 00
-;46H~49H  52~53H
-C_EPHY = E1 22 B5     B2 73 75 EA
-;43H~45H 54H~57H
-D_EPHY = 87 75 7A 39
-;58H~5BH
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8104E.map

@@ -1,32 +0,0 @@
-29 81 EC 10 37 81 EC 10 23 01 04 01 9C 62 00 E0
-4C 37 00 01 00 CF C3 FF 04 02 C0 8C 80 02 00 00
-11 3C 07 00 10 20 76 00 63 01 01 FF 00 27 AA 03
-02 20 99 A5 80 02 00 20 04 40 20 00 04 40 20 3F
-00 00 20 E1 22 B5 60 00 0A 00 E0 00 68 4C 00 00
-01 00 00 00 B2 73 75 EA 87 75 7A 39 CA 98 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

external/cache/sources/linuxpg/8104EF.cfg

@@ -1,46 +0,0 @@
-NODEID = 00 E0 4C 37 00 01
-;ENDID = 00 E0 4C 37 FF FF
-VID = 10 EC
-DID = 81 37
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 9C
-CONFIG3 = 62
-CONFIG4 = 04
-CONFIG5 = 02
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-LEDCFG = 98 CA
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 37 00 00 00 01
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8105E.cfg

@@ -1,65 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-VID = 10 EC
-DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = 0F
-CONFIGx = 1C
-CONFIG3 = 60
-CONFIG4 = 14
-CONFIG5 = 82
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 8A
-
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-LEDCFG = 98 CA
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-
-;PCI-E Parameter (Do not change without Realtek approval)
-C_PCIE0 = 04 01
-;0AH~0BH
-C_PCIE1 = C0 8C 80 02 00 00 11 3C 07 00 10 20
-;1AH~25H
-C_PCIE2 = 76 00 63 01 01 FF    13 AA 03 02 20
-;26H~2BH 2DH~31H
-C_PCIE3 = 80 02 00 20 04 40 20 00 04 40 20   00 00 20
-;34H~3EH 40H~42H
-C_PCIE4 = 60 00 0A 00   00 00
-;46H~49H  52~53H
-C_EPHY = B9 6A 98     AC 6B 75 80
-;43H~45H 54H~57H
-D_EPHY = 8D 75 7B 01
-;58H~5BH
-E0_EPHY = 48
-;5EH
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8105E.map

@@ -1,8 +0,0 @@
-29 81 EC 10 36 81 EC 10 23 01 04 01 1C 60 00 E0
-4C 36 00 01 00 0F C3 FF 14 82 C0 8C 80 02 00 00
-11 3C 07 00 10 20 76 76 00 63 01 01 FF 13 AA 03
-02 20 99 A5 80 02 00 20 04 40 20 00 04 40 20 3F
-00 00 20 B9 6A 98 60 00 0A 00 E0 00 36 4C 00 00
-01 00 00 00 AC 6B 75 80 8D 75 7B 01 CA 98 48 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

external/cache/sources/linuxpg/8105EC.cfg

@@ -1,65 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-VID = 10 EC
-DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = 0F
-CONFIGx = 1C
-CONFIG3 = 60
-CONFIG4 = 14
-CONFIG5 = 82
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 8A
-
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-LEDCFG = 98 CA
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-
-;PCI-E Parameter (Do not change without Realtek approval)
-C_PCIE0 = 04 01
-;0AH~0BH
-C_PCIE1 = C0 8C 80 02 00 00 11 3C 07 00 10 20
-;1AH~25H
-C_PCIE2 = 76 00 63 01 01 FF    13 AA 03 02 20
-;26H~2BH 2DH~31H
-C_PCIE3 = 80 02 00 20 04 40 20 00 04 40 20   00 00 20
-;34H~3EH 40H~42H
-C_PCIE4 = 60 00 0A 00   00 00
-;46H~49H  52~53H
-C_EPHY = B9 6A 98     AC 6B 76 80
-;43H~45H 54H~57H
-D_EPHY = 6D 75 7B 01
-;58H~5BH
-E_EPHY = 48 87 79 07 80
-;5EH~62H
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8105EC.map

@@ -1,8 +0,0 @@
-29 81 EC 10 36 81 EC 10 23 01 04 01 1C 60 00 E0
-4C 36 00 03 00 0F C3 FF 14 82 C0 8C 80 02 00 00
-11 3C 07 00 10 20 76 00 63 01 01 FF 00 13 AA 03
-02 20 00 EA 80 02 00 20 04 40 20 00 04 40 20 3F
-00 00 20 B9 6A 98 60 00 0A 00 E0 00 36 4C 00 00
-03 00 00 00 AC 6B 76 80 6D 75 7B 01 CA 98 48 87
-79 07 80 FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

external/cache/sources/linuxpg/8105ECEF.cfg

@@ -1,48 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-;VID = 10 EC
-;DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = 0F
-CONFIGx = 1C
-CONFIG3 = 60
-CONFIG4 = 14
-CONFIG5 = 82
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 8A
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-LEDCFG = 98 CA
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8105EF.cfg

@@ -1,48 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-;VID = 10 EC
-;DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = 0F
-CONFIGx = 1C
-CONFIG3 = 60
-CONFIG4 = 14
-CONFIG5 = 82
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 8A
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-LEDCFG = 98 CA
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8106E.cfg

@@ -1,65 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-VID = 10 EC
-DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 1C
-CONFIG3 = 60
-CONFIG4 = 14
-CONFIG5 = 82
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 8A
-
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-LEDCFG = 90 CA
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-
-;PCI-E Parameter (Do not change without Realtek approval)
-C_PCIE0 = 04 01
-;0AH~0BH
-C_PCIE1 = C0 8C 80 02 00 00 11 3C 07 00 10 20
-;1AH~25H
-C_PCIE2 = 76 00 63 01 01 FF    13 00 03 02 20
-;26H~2BH 2DH~31H
-C_PCIE3 = 80 02 00 20 04 40 20 00 04 40 20   00 00 20
-;34H~3EH 40H~42H
-C_PCIE4 = 60 00 0A 00   00 00
-;46H~49H  52~53H
-C_EPHY = B9 6A 98     AC 6B 76 80
-;43H~45H 54H~57H
-D_EPHY = 6D 75 7B 01
-;58H~5BH
-E_EPHY = 48 87 79 07 80
-;5EH~62H
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8106E.map

@@ -1,8 +0,0 @@
-29 81 EC 10 36 81 EC 10 23 01 04 01 1C 60 00 E0
-4C 36 00 03 00 CF C3 FF 14 82 C0 8C 80 02 00 00
-11 3C 07 00 10 20 76 00 63 01 01 FF 00 13 00 03
-02 20 00 EA 80 02 00 20 04 40 20 00 04 40 20 3F
-00 00 20 B9 6A 98 60 00 0A 00 E0 00 36 4C 00 00
-03 00 00 00 AC 6B 76 80 6D 75 7B 01 CA 90 48 87
-79 07 80 FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

external/cache/sources/linuxpg/8106EEF.cfg

@@ -1,53 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-;VID = 10 EC
-;DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 1C
-CONFIG3 = 60
-CONFIG4 = 14
-CONFIG5 = 82
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 8A
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-LEDCFG = 90 CA
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8106EU.cfg

@@ -1,49 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-VID = 10 EC
-DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8106EUEF.cfg

@@ -1,54 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-;VID = 10 EC
-;DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 1:PHY Disable    BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8107E.cfg

@@ -1,49 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-;VID = 10 EC
-;DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-;CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 37
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-;PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8107EEF.cfg

@@ -1,58 +0,0 @@
-NODEID = 00 E0 4C 36 00 01
-;ENDID = 00 E0 4C 36 FF FF
-;VID = 10 EC
-;DID = 81 36
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-;CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-;PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 36 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 1:PHY Disable    BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;CTAPSHORT
-;Enable set to 01H, Disable set to 00H
-;CTAPSHORT = 01
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8110SC.cfg

@@ -1,39 +0,0 @@
-NODEID = 00 E0 4C 67 00 01
-;ENDID = 00 E0 4C 67 FF FF
-VID = 10 EC
-DID = 81 67
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-MNGNT = 20
-MXLAT = 40
-CONFIGx = 01
-CONFIG3 = A1
-CONFIG0 = 15
-CONFIG1 = CD
-CONFIG4 = 80
-CONFIG5 = 13
-PMC = C2 F7
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;	    00 ==> PXE protocol
-;	    01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;	    00 ==> ROM disable
-;	    01 ==> Int 18h
-;	    10 ==> Int 19h
-;	    11 ==> PnP/BEV(BBS)
-;Bit 3	    Show Config Message
-;	    0 ==> Enable
-;	    1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;	    00 ==> 3 Seconds
-;	    01 ==> 5 Seconds
-;	    10 ==> 1 Seconds
-;	    11 ==> 0 Seconds
-VERSION = 1.031
-

external/cache/sources/linuxpg/8110SC.map

@@ -1,8 +0,0 @@
-29 81 EC 10 67 81 EC 10 23 01 20 40 01 A1 00 E0
-4C 67 10 40 15 CD C2 F7 00 80 00 00 00 00 00 13
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 D7 7E 00 00 00 00 00 00 00 00 00 00 00 3F
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

external/cache/sources/linuxpg/8116AFEF.cfg

@@ -1,70 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;LEDSUBCFG
-;Please make sure CONFIGX LED low power bit enabled
-;(IO reg offset 0x53 bit 2 set to 0) before modifying LEDSUBCFG
-;BIT 0:LED0 Low Power Enable in D3cold    BIT 1:LED1 Low Power Enable in D3cold
-;BIT 2:LED2 Low Power Enable in D3cold
-;BIT 3:LED0 Preboot Enable    BIT 4: LED1 Preboot Enable
-;BIT 5:LED2 Preboot Enable
-;LEDSUBCFG = 00
-
-;Disable: 00, Enable: 01
-;Secure boot
-;SECUREBOOT = 01
-
-;PCIE Link Capability
-;LINKPCIEGEN = 11
-
-;Disable multi-function X
-;DISABLEFUNCX = 00
-VERSION = 1.031
-

external/cache/sources/linuxpg/8116AFFL.cfg

@@ -1,36 +0,0 @@
-; RTL8168FP Configuration file
-; 2009/04/01
-;
-; Out of band MAC ID
-;NODEID = 00 E0 4C 68 03 DD
-;
-; user login name
-USERNAME = Administrator
-; user password, password length has to be 16 bytes
-; default password 'realtek'
-PASSWORD = 52 65 61 6c 74 65 6b 00 00 00 00 00 00 00 00 00
-; operation role
-; Administrator : 01
-; Operator: 02
-; Guest : 03
-;ROLE = 01
-; OOB IP address
-IP = 192.168.0.10
-; OOB subnet mask
-SUBNET = 255.255.250.0
-; OOB gateway IP address
-GATEWAY = 192.168.0.254
-; OOB DNS server ip address
-;DNS = 192.168.0.1
-; ASP console IP address
-;ASFIP = 192.168.0.3
-; ASF function setting
-; enable : ON
-; disable : OFF
-;ASFON = ON
-; IPV4 DHCP setting
-; enable : ON
-; disable : OFF
-;DHCPIPV4 = OFF
-HOSTNAME = DASHOOB
-HN_SUFFIX = ON

external/cache/sources/linuxpg/8116ASEF.cfg

@@ -1,70 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;LEDSUBCFG
-;Please make sure CONFIGX LED low power bit enabled
-;(IO reg offset 0x53 bit 2 set to 0) before modifying LEDSUBCFG
-;BIT 0:LED0 Low Power Enable in D3cold    BIT 1:LED1 Low Power Enable in D3cold
-;BIT 2:LED2 Low Power Enable in D3cold
-;BIT 3:LED0 Preboot Enable    BIT 4: LED1 Preboot Enable
-;BIT 5:LED2 Preboot Enable
-;LEDSUBCFG = 00
-
-;Disable: 00, Enable: 01
-;Secure boot
-;SECUREBOOT = 01
-
-;PCIE Link Capability
-;LINKPCIEGEN = 11
-
-;Disable multi-function X
-;DISABLEFUNCX = 00
-VERSION = 1.031
-

external/cache/sources/linuxpg/8116ASFL.cfg

@@ -1,36 +0,0 @@
-; RTL8168FP Configuration file
-; 2009/04/01
-;
-; Out of band MAC ID
-;NODEID = 00 E0 4C 68 03 DD
-;
-; user login name
-USERNAME = Administrator
-; user password, password length has to be 16 bytes
-; default password 'realtek'
-PASSWORD = 52 65 61 6c 74 65 6b 00 00 00 00 00 00 00 00 00
-; operation role
-; Administrator : 01
-; Operator: 02
-; Guest : 03
-;ROLE = 01
-; OOB IP address
-IP = 192.168.0.10
-; OOB subnet mask
-SUBNET = 255.255.250.0
-; OOB gateway IP address
-GATEWAY = 192.168.0.254
-; OOB DNS server ip address
-;DNS = 192.168.0.1
-; ASP console IP address
-;ASFIP = 192.168.0.3
-; ASF function setting
-; enable : ON
-; disable : OFF
-;ASFON = ON
-; IPV4 DHCP setting
-; enable : ON
-; disable : OFF
-;DHCPIPV4 = OFF
-HOSTNAME = DASHOOB
-HN_SUFFIX = ON

external/cache/sources/linuxpg/8116EF.cfg

@@ -1,76 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 1:PHY Disable    BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;Link Capability
-;PHYGBCR = 02 00
-;PHYANAR = 01 E1
-
-;LEDSUBCFG
-;Please make sure CONFIGX LED low power bit enabled
-;(IO reg offset 0x53 bit 2 set to 0) before modifying LEDSUBCFG
-;BIT 0:LED0 Low Power Enable in D3cold    BIT 1:LED1 Low Power Enable in D3cold
-;BIT 2:LED2 Low Power Enable in D3cold
-;BIT 3:LED0 Preboot Enable    BIT 4: LED1 Preboot Enable
-;BIT 5:LED2 Preboot Enable
-;LEDSUBCFG = 00
-
-;Disable: 00, Enable: 01
-;UPS mode power saving
-;UPSMODEPWRSAVING = 00
-;Secure boot
-;SECUREBOOT = 01
-
-;PCIE Link Capability
-;LINKPCIEGEN = 11
-
-;Disable multi-function X
-;DISABLEFUNCX = 00
-VERSION = 1.031
-

external/cache/sources/linuxpg/8116FL.cfg

@@ -1,36 +0,0 @@
-; RTL8168FP Configuration file
-; 2009/04/01
-;
-; Out of band MAC ID
-;NODEID = 00 E0 4C 68 03 DD
-;
-; user login name
-USERNAME = Administrator
-; user password, password length has to be 16 bytes
-; default password 'realtek'
-PASSWORD = 52 65 61 6c 74 65 6b 00 00 00 00 00 00 00 00 00
-; operation role
-; Administrator : 01
-; Operator: 02
-; Guest : 03
-;ROLE = 01
-; OOB IP address
-IP = 192.168.0.10
-; OOB subnet mask
-SUBNET = 255.255.250.0
-; OOB gateway IP address
-GATEWAY = 192.168.0.254
-; OOB DNS server ip address
-;DNS = 192.168.0.1
-; ASP console IP address
-;ASFIP = 192.168.0.3
-; ASF function setting
-; enable : ON
-; disable : OFF
-;ASFON = ON
-; IPV4 DHCP setting
-; enable : ON
-; disable : OFF
-;DHCPIPV4 = OFF
-HOSTNAME = DASHOOB
-HN_SUFFIX = ON

external/cache/sources/linuxpg/8117APEF.cfg

@@ -1,82 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 1:PHY Disable    BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;Link Capability
-;PHYGBCR = 02 00
-;PHYANAR = 01 E1
-
-;LEDSUBCFG
-;Please make sure CONFIGX LED low power bit enabled
-;(IO reg offset 0x53 bit 2 set to 0) before modifying LEDSUBCFG
-;BIT 0:LED0 Low Power Enable in D3cold    BIT 1:LED1 Low Power Enable in D3cold
-;BIT 2:LED2 Low Power Enable in D3cold
-;BIT 3:LED0 Preboot Enable    BIT 4: LED1 Preboot Enable
-;BIT 5:LED2 Preboot Enable
-;LEDSUBCFG = 00
-
-;Disable: 00, Enable: 01
-;UPHY Reset USB Bypass mode
-;USBBYPASSMODE = 00
-;UPS mode power saving
-;UPSMODEPWRSAVING = 00
-;Secure boot
-;SECUREBOOT = 01
-
-;EHCI PMC
-;Enable EHCI PME_D3cold & PME_D3hot support in PMC
-EHCIPMC = C3 FF
-
-;PCIE Link Capability
-;LINKPCIEGEN = 11
-
-;Disable multi-function X
-;DISABLEFUNCX = 00
-VERSION = 1.031
-

external/cache/sources/linuxpg/8117EF.cfg

@@ -1,82 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 1:PHY Disable    BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;Link Capability
-;PHYGBCR = 02 00
-;PHYANAR = 01 E1
-
-;LEDSUBCFG
-;Please make sure CONFIGX LED low power bit enabled
-;(IO reg offset 0x53 bit 2 set to 0) before modifying LEDSUBCFG
-;BIT 0:LED0 Low Power Enable in D3cold    BIT 1:LED1 Low Power Enable in D3cold
-;BIT 2:LED2 Low Power Enable in D3cold
-;BIT 3:LED0 Preboot Enable    BIT 4: LED1 Preboot Enable
-;BIT 5:LED2 Preboot Enable
-;LEDSUBCFG = 00
-
-;Disable: 00, Enable: 01
-;UPHY Reset USB Bypass mode
-;USBBYPASSMODE = 00
-;UPS mode power saving
-;UPSMODEPWRSAVING = 00
-;Secure boot
-;SECUREBOOT = 01
-
-;EHCI PMC
-;Enable EHCI PME_D3cold & PME_D3hot support in PMC
-EHCIPMC = C3 FF
-
-;PCIE Link Capability
-;LINKPCIEGEN = 11
-
-;Disable multi-function X
-;DISABLEFUNCX = 00
-VERSION = 1.031
-

external/cache/sources/linuxpg/8118.cfg

@@ -1,49 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-;CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 37
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-;PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8118.map

@@ -1,8 +0,0 @@
-29 81 00 E0 4C 68 00 01 EC 10 68 81 EC 10 23 01
-00 E0 4C 68 00 00 00 01 84 FA 3F FF 19 4C 30 02
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

external/cache/sources/linuxpg/8118EF.cfg

@@ -1,65 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-;CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-;PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 1:PHY Disable    BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;Link Capability
-;PHYGBCR = 02 00
-;PHYANAR = 01 E1
-;SpeedUp Capability
-;Enable GPHY speed up by MAC set to 29H, Disable GPHY speed up by MAC set to 21H
-;PHYPWRFUN = 21
-
-;CTAPSHORT
-;Enable set to 01H, Disable set to 00H
-;CTAPSHORT = 01
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8118KB.cfg

@@ -1,72 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-VID = 10 EC
-DID = 81 62
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;For add-on device, please set CONFIG3 to 60H
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 17
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDXCFG = High-Byte Low-Byte
-;LEDX Bit 11: Low power mode enable
-;LEDX Bit 10: Preboot enable
-;Please make sure CONFIGx LED low power bit enabled
-;(IO reg offset 0x53 bit 2 set to 0) before modifying LED low power mode or LED preboot
-;LED0CFG = 02 01
-;LED1CFG = 02 02
-;LED2CFG = 02 08
-;LED3CFG = 02 20
-;LED Feature Functions
-;Set BIT 0 to 0 : V1 led table.
-;Set BIT 0 to 1 : V2 led table.
-;BIT 1 to BIT 7 : Reserved
-;LEDFEATUREFUNC = 60
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;MDI swap
-;MDI non-swap set to 00H, MDI swap set to 20H
-;MDISWAP = 00
-
-;Tx polarity swap
-;BIT 7: P3 non-swap set to 1, P3 swap set to 0
-;BIT 6: P2 non-swap set to 0, P2 swap set to 1
-;BIT 5: P1 non-swap set to 1, P1 swap set to 0
-;BIT 4: P0 non-swap set to 0, P0 swap set to 1
-;BIT 0 to BIT 3 : Reserved
-;TXPOLSWAP = A0
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8118KBEF.cfg

@@ -1,77 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 62
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;For add-on device, please set CONFIG3 to 60H
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDXCFG = High-Byte Low-Byte
-;LEDX Bit 11: Low power mode enable
-;LEDX Bit 10: Preboot enable
-;Please make sure CONFIGx LED low power bit enabled
-;(IO reg offset 0x53 bit 2 set to 0) before modifying LED low power mode or LED preboot
-;LED0CFG = 02 01
-;LED1CFG = 02 02
-;LED2CFG = 02 08
-;LED3CFG = 02 20
-;LED Feature Functions
-;Set BIT 0 to 0 : V1 led table.
-;Set BIT 0 to 1 : V2 led table.
-;BIT 1 to BIT 7 : Reserved
-;LEDFEATUREFUNC = 60
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 1:PHY Disable    BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;MDI swap
-;MDI non-swap set to 00H, MDI swap set to 20H
-;MDISWAP = 00
-
-;Tx polarity swap
-;BIT 7: P3 non-swap set to 1, P3 swap set to 0
-;BIT 6: P2 non-swap set to 0, P2 swap set to 1
-;BIT 5: P1 non-swap set to 1, P1 swap set to 0
-;BIT 4: P0 non-swap set to 0, P0 swap set to 1
-;BIT 0 to BIT 3 : Reserved
-;TXPOLSWAP = A0
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8119.cfg

@@ -1,49 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-VID = 10 EC
-DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 3C
-CONFIG3 = 60
-CONFIG4 = 14
-CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-CONFIG7 = 07
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8119.map

@@ -1,32 +0,0 @@
-29 81 00 E0 4C 68 00 01 EC 10 68 81 EC 10 23 01
-01 00 00 00 68 4C E0 00 CA C9 30 FF 18 51 00 18
-52 CF 18 53 3C 18 54 60 18 55 14 18 56 02 50 42
-C3 FF 40 30 00 FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

external/cache/sources/linuxpg/8119EF.cfg

@@ -1,58 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 3C
-CONFIG3 = 60
-CONFIG4 = 14
-CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 07
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 1:PHY Disable
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;Link Capability
-;PHYGBCR = 03 00
-;PHYANAR = 01 E1
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8125BGEF.cfg

@@ -2,20 +2,20 @@ NODEID = 00 E0 4C 68 00 0F
 ;ENDID = 00 E0 4C 68 FF FF
 ;VID = 10 EC
 ;DID = 81 25
-SVID = 10 EC
-SMID = 01 23
+;SVID = 10 EC
+;SMID = 01 23
 
 ;Do not change following parameters without Realtek approval
 ;CONFIG0 = 00
 ;CONFIG1 = CF
-CONFIGx = 3C
+;CONFIGx = 3C
 ;For add-on device, please set CONFIG3 to 60H
 ;CONFIG3 = 60
 ;CONFIG4 = 14
 ;CONFIG5 = 02
 ;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
 ;CONFIG5 = 0A
-CONFIG7 = 07
+;CONFIG7 = 07
 ;PMC = C3 FF
 ;ROMBAR = 00
 ;LEDXCFG = High-Byte Low-Byte
@@ -32,7 +32,7 @@ LED2CFG = 1A 2B
 ;Set BIT 0 to 1 : V2 led table.
 ;BIT 1 to BIT 7 : Reserved
 ;LEDFEATUREFUNC = 60
-ROMCONF = 3F
+;ROMCONF = 3F
 ;Bit 7-6    Boot Protocol
 ;           00 ==> PXE protocol
 ;           01 ==> RPL protocol
@@ -54,7 +54,7 @@ ROMCONF = 3F
 ;           11 ==> 0 Second
 
 ;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
+;SN = 00 E0 4C 68 00 00 00 01
 
 ;LANCFG
 ;BIT 0:LAN Disable     BIT 1:PHY Disable    BIT 2:Link OK

external/cache/sources/linuxpg/8168.cfg

@@ -1,49 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-VID = 10 EC
-DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 00
-CONFIG3 = 60
-CONFIG4 = 00
-CONFIG5 = 03
-PMC = C2 F7
-ROMBAR = 00
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;PCI-E Parameter
-PCIE1= 04 01 42 60 7E 00 00 04
-PCIE2= FF FF FF FF FF FF 1F
-PCIE3= 00 47 10 F0 F0 01 BF 01 00 00 60 00 00
-;0AH,0BH,18H,1A~1EH
-;28H~2EH
-;30H~31H, 34H~3EH
-VERSION = 1.031
-

external/cache/sources/linuxpg/8168.map

@@ -1,16 +0,0 @@
-29 81 EC 10 68 81 EC 10 23 01 04 01 00 60 00 E0
-4C 68 00 01 00 CF C2 F7 42 00 60 7E 00 00 04 03
-00 E0 4C 68 00 00 00 01 FF FF FF FF FF FF 1F 00
-00 46 0A C3 10 F0 F0 01 BF 01 00 00 60 00 00 3F
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

external/cache/sources/linuxpg/8168C.cfg

@@ -1,56 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-VID = 10 EC
-DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 0C
-CONFIG3 = 62
-CONFIG4 = 00
-CONFIG5 = 02
-PMC = C3 FF
-ROMBAR = 00
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;PCI-E Parameter (Do not change without Realtek approval)
-C_PCIE0 = 04 01
-;0AH~0BH
-C_PCIE1 = c1 8C 80 02 00 00 11 3c 07 00 10 20
-;1AH~25H
-C_PCIE2 = 76 00 63 01 01 FF    27 AA 03 02 20
-;26H~2BH 2DH~31H
-C_PCIE3 = 80 02 00 20 10 00 21 00 10 00 21   00 00 80
-;34H~3EH 40H~42H
-C_PCIE4 = 80 00 20 00   00 00
-;46H~49H  52~53H
-C_EPHY = 61 42 55     9E 72 B5 00
-;43H~45H 54H~57H
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8168C.map

@@ -1,32 +0,0 @@
-29 81 EC 10 68 81 EC 10 23 01 04 01 0C 62 00 E0
-4C 68 00 01 00 CF C3 FF 00 02 C1 8C 80 02 00 00
-11 3C 07 00 10 20 76 00 63 01 01 FF 00 27 AA 03
-02 20 1C AC 80 02 00 20 10 00 21 00 10 00 21 3F
-00 00 80 61 42 55 80 00 20 00 E0 00 68 4C 00 00
-01 00 00 00 9E 72 B5 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

external/cache/sources/linuxpg/8168CP.cfg

@@ -1,106 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-VID = 10 EC
-DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 4C
-CONFIG3 = E2
-CONFIG4 = 00
-CONFIG5 = 02
-PMC = C3 FF
-ROMBAR = 00
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;PCI-E Parameter (Do not change without Realtek approval)
-C_PCIE0 = 04 01
-;0AH~0BH
-C_PCIE1 = C1 8C 80 02 00 00 11 3c 07 00 10 20
-;1AH~25H
-C_PCIE2 = 76 00 63 01 01 FF    27 AA 03 02 20
-;;26H~2BH 2DH~31H
-C_PCIE3 = 80 02 00 20 10 00 21 00 10 00 21   00 00 80
-;34H~3EH 40H~42H
-C_PCIE4 = 80 00 20 00   00 00
-;46H~49H  52~53H
-C_EPHY = 61 42 5F     9E 74 F5 00
-;43H~45H 54H~57H
-
-CP_CONSOLE_NODEID = 00 00 00 00 00 00
-CP_CONSOLE_IP = 00 00 00 00
-CP_CLIENT_IP = 00 00 00 00
-
-CP_OPERATOR_KEY = 98 73 F0 5B 1C 67 CC 50 D1 1E 2B B1 10 0D BB C3 8D D7 08 E2
-CP_ADMINISTRATOR_KEY = 10 67 B4 D0 D5 2B C5 0C 3A AF 66 69 B7 34 45 99 28 F4 F9 CC
-CP_GENERATOR_KEY = DE EF 16 3B FB 8C 30 50 6B 3B F1 13 77 35 4D 9C 55 BD EB 87
-CP_RANDOM_KEY = 85 DB 22 6F 49 98 55 2C 22 D0 1A EA 88 51 45 48 AA 4F 65 3E
-
-CP_REMOTE_CONTROL = 88 00 03 88 00 02 88 00 01 88 00 04
-;Remote Control Parameter
-;INTEL  ==> 88 00 03 88 00 02 88 00 01 88 00 04
-;AMD    ==> 71 00 00 71 02 00 71 01 00 71 03 00
-;NVIDIA ==> E0 0A 00 E0 0A 02 E0 0A 01 E0 0A 03
-
-;Legacy sensor polling parameter
-CP_LSP0 = 5F C0 FF 37 01 01 09 10 00 03 01
-;E0H~EAH
-CP_LSP1 = 5F 42 20 20 05 6F 00 08 01 00 01
-;EBH~F5H
-CP_LSP2 = 5F 28 FF FF 04 07 02 10 0A 03 01
-;F6H~100H
-CP_LSP3 = 5F 29 FF FF 04 07 02 10 0B 07 01
-;101~10BH
-CP_LSP4 = 5F 20 FF 90 02 07 02 10 01 03 01
-;10CH~116H
-CP_LSP5 = 5F 22 FF 49 02 07 02 10 03 07 01
-;117H~121H
-CP_LSP6 = 5F 23 FF 4D 02 07 02 10 04 07 02
-;122H~12CH
-CP_LSP7 = 5F 24 FF 4D 02 07 02 10 05 07 03
-;12DH~137H
-
-;UUID
-CP_UUID = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-;SYSTEM ID
-CP_SYSID = 00 00
-
-CP_EXTENDED_58_5F = 00 00 00 00 00 00 00 00
-CP_EXTENDED_60 = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-CP_EXTENDED_80_8B = 9B AB 0C 00 32 00 03 0A 03 0F C8 00
-CP_EXTENDED_AA_AD = 00 00 6A 92
-CP_EXTENDED_B0_BF = 70 75 62 6C 69 63 00 00 00 00 00 00 00 00 00 00
-CP_EXTENDED_C0_CF = 00 00 00 00 00 00 00 19 67 F8 00 00 00 1F F0 00
-CP_EXTENDED_DC_DF = 7E 00 FF 03
-CP_EXTENDED_138_143 = 04 00 00 00 00 40 06 00 01 00 00 00
-CP_EXTENDED_194_19F = 00 00 00 00 00 00 00 00 00 00 00 00
-CP_EXTENDED_1A0 = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-CP_EXTENDED_1C0 = 00 00 00 00 00 00 00 A2 00 A2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-CP_EXTENDED_1E0 = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-;80H~1FFH
-VERSION = 1.031

external/cache/sources/linuxpg/8168CP.map

@@ -1,32 +0,0 @@
-29 81 EC 10 68 81 EC 10 23 01 04 01 4C E2 00 E0
-4C 68 00 01 00 CF C3 FF 00 02 C1 8C 80 02 00 00
-11 3C 07 00 10 20 76 00 63 01 01 FF 00 27 AA 03
-02 20 DC A5 80 02 00 20 10 00 21 00 10 00 21 3F
-00 00 80 61 42 5F 80 00 20 00 E0 00 68 4C 00 00
-01 00 00 00 9E 74 F5 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-9B AB 0C 00 32 00 03 0A 03 0F C8 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 6A 92 00 00
-70 75 62 6C 69 63 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 19 67 F8 00 00 00 1F F0 00
-88 00 03 88 00 02 88 00 01 88 00 04 7E 00 FF 03
-89 04 FF 0D 07 6F 04 20 00 03 00 89 04 FF 01 05
-6F 00 08 01 17 00 80 23 FF 00 04 07 02 10 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 04 00 00 00 00 40 06 00
-01 00 00 00 E2 08 D7 8D C3 BB 0D 10 B1 2B 1E D1
-50 CC 67 1C 5B F0 73 98 CC F9 F4 28 99 45 34 B7
-69 66 AF 3A 0C C5 2B D5 D0 B4 67 10 87 EB BD 55
-9C 4D 35 77 13 F1 3B 6B 50 30 8C FB 3B 16 EF DE
-3E 65 4F AA 48 45 51 88 EA 1A D0 22 2C 55 98 49
-6F 22 DB 85 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 A2 00 A2 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

external/cache/sources/linuxpg/8168D.cfg

@@ -1,62 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-VID = 10 EC
-DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 9C
-CONFIG3 = 62
-CONFIG4 = 04
-CONFIG5 = 02
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-LEDCFG = 98 CA
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;PCI-E Parameter (Do not change without Realtek approval)
-C_PCIE0 = 04 01
-;0AH~0BH
-C_PCIE1 = c0 8C 80 02 00 00 11 3c 07 00 10 20
-;1AH~25H
-C_PCIE2 = 76 00 63 01 01 FF    27 AA 03 02 20
-;26H~2BH 2DH~31H
-C_PCIE3 = 80 02 00 20 04 40 20 00 04 40 20   00 00 20
-;34H~3EH 40H~42H
-C_PCIE4 = 60 00 0A 00   00 00
-;46H~49H  52~53H
-C_EPHY   = 63 02 35     B2 73 71 80
-C0_EPHY  = E3 02 BD     B2 63 B5 EA
-;43H~45H 54H~57H
-D_EPHY   = 87 75 7B 39
-D0_EPHY  = 84 75 7A 39
-;58H~5BH
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8168D.map

@@ -1,32 +0,0 @@
-29 81 EC 10 68 81 EC 10 23 01 04 01 9C 62 00 E0
-4C 68 00 01 00 CF C3 FF 04 02 C0 8C 80 02 00 00
-11 3C 07 00 10 20 76 00 63 01 01 FF 00 27 AA 03
-02 20 99 A5 80 02 00 20 04 40 20 00 04 40 20 3F
-00 00 20 E1 22 B5 60 00 0A 00 E0 00 68 4C 00 00
-01 00 00 00 B2 73 75 EA 87 75 7A 39 CA 98 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

external/cache/sources/linuxpg/8168DEF.cfg

@@ -1,46 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 9C
-CONFIG3 = 62
-CONFIG4 = 04
-CONFIG5 = 02
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-LEDCFG = 98 CA
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8168DPEF.cfg

@@ -1,28 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 98
-CONFIG3 = 60
-;CONFIG4 = 04
-;CONFIG5 = 02
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 98 CA
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;Multi Function Configuration.
-;Enable Multi function set to 01H, Disable Multi function set to 00H
-;MULTIFUN = 01
-VERSION = 1.031
-

external/cache/sources/linuxpg/8168E.cfg

@@ -1,122 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-VID = 10 EC
-DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = 0F
-;Asf Disable
-CONFIGx = 1C
-CONFIG3 = 60
-;Asf Enable
-;CONFIGx = 5D
-;CONFIG3 = E0
-
-CONFIG4 = 14
-CONFIG5 = 82
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 8A
-
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-LEDCFG = 98 CA
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;PCI-E Parameter (Do not change without Realtek approval)
-C_PCIE0 = 04 01
-;0AH~0BH
-C_PCIE1 = C0 8C 80 02 00 00 11 3C 07 00 10 20
-;1AH~25H
-C_PCIE2 = 76 00 63 01 01 FF    13 AA 03 02 20
-;26H~2BH 2DH~31H
-C_PCIE3 = 80 02 00 20 04 40 20 00 04 40 20   00 00 20
-;34H~3EH 40H~42H
-C_PCIE4 = 60 00 0A 00   00 00
-;46H~49H  52~53H
-C_EPHY = B9 6A 98     AC 6B 75 80
-;43H~45H 54H~57H
-D_EPHY = 8D 75 7B 01
-;58H~5BH
-E0_EPHY = 48
-;5EH
-
-CP_CONSOLE_NODEID = 00 00 00 00 00 00
-CP_CONSOLE_IP = 00 00 00 00
-CP_CLIENT_IP = 00 00 00 00
-
-CP_OPERATOR_KEY = 98 73 F0 5B 1C 67 CC 50 D1 1E 2B B1 10 0D BB C3 8D D7 08 E2
-CP_ADMINISTRATOR_KEY = 10 67 B4 D0 D5 2B C5 0C 3A AF 66 69 B7 34 45 99 28 F4 F9 CC
-CP_GENERATOR_KEY = DE EF 16 3B FB 8C 30 50 6B 3B F1 13 77 35 4D 9C 55 BD EB 87
-CP_RANDOM_KEY = 85 DB 22 6F 49 98 55 2C 22 D0 1A EA 88 51 45 48 AA 4F 65 3E
-
-CP_REMOTE_CONTROL = 88 00 03 88 00 02 88 00 01 88 00 04
-;Remote Control Parameter
-;INTEL  ==> 88 00 03 88 00 02 88 00 01 88 00 04
-;AMD    ==> 71 00 00 71 02 00 71 01 00 71 03 00
-;NVIDIA ==> E0 0A 00 E0 0A 02 E0 0A 01 E0 0A 03
-
-;Legacy sensor polling parameter
-CP_LSP0 = 83 23 80 80 06 01 00 10 06 07 00
-;E0H~EAH
-CP_LSP1 = 81 23 80 80 05 01 00 10 07 07 00
-;EBH~F5H
-CP_LSP2 = 80 23 FF 00 04 07 02 10 00 00 00
-;F6H~100H
-CP_LSP3 = 00 00 00 00 00 00 00 00 00 00 00
-;101~10BH
-CP_LSP4 = 00 00 00 00 00 00 00 00 00 00 00
-;10CH~116H
-CP_LSP5 = 00 00 00 00 00 00 00 00 00 00 00
-;117H~121H
-CP_LSP6 = 00 00 00 00 00 00 00 00 00 00 00
-;122H~12CH
-CP_LSP7 = 00 00 00 00 00 00 00 00 00 00 00
-;12DH~137H
-
-;UUID
-CP_UUID = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-;SYSTEM ID
-CP_SYSID = 00 00
-
-CP_EXTENDED_5F = 00
-CP_EXTENDED_60 = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-CP_EXTENDED_80_8B = 9B 8B 14 00 32 00 03 0A 03 0F C8 00
-CP_EXTENDED_AA_AD = 00 00 6A 92
-CP_EXTENDED_B0_BF = 70 75 62 6C 69 63 00 00 00 00 00 00 00 00 00 00
-CP_EXTENDED_C0_CF = 00 00 00 00 00 00 00 19 67 F8 00 00 00 1F F0 00
-CP_EXTENDED_DC_DF = 7E 00 FF 02
-CP_EXTENDED_138_143 = 04 00 00 00 00 40 06 00 01 00 00 00
-CP_EXTENDED_194_19F = 00 00 00 00 00 00 00 00 00 00 00 00
-CP_EXTENDED_1A0 = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EC 10 EC 10 68 81 68 81 00 00 00 00
-CP_EXTENDED_1C0 = 00 00 00 00 00 00 00 A2 00 A2 00 67 F8 00 00 00 1F F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-CP_EXTENDED_1E0 = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-;80H~1FFH
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8168E.map

@@ -1,32 +0,0 @@
-29 81 EC 10 68 81 EC 10 23 01 04 01 1C 60 00 E0
-4C 68 00 01 00 0F C3 FF 14 82 C0 8C 80 02 00 00
-11 3C 07 00 10 20 76 76 00 63 01 01 FF 13 AA 03
-02 20 99 A5 80 02 00 20 04 40 20 00 04 40 20 3F
-00 00 20 B9 6A 98 60 00 0A 00 E0 00 68 4C 00 00
-01 00 00 00 AC 6B 75 80 8D 75 7B 01 CA 98 48 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-9B 8B 14 00 32 00 03 0A 03 0F C8 00 00 13 72 84
-8B 37 C0 A8 00 03 C0 A8 00 0A 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 6A 92 00 00
-70 75 62 6C 69 63 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 19 67 F8 00 00 00 1F F0 00
-71 00 00 71 02 00 71 01 00 71 03 00 7E 00 FF 02
-83 23 80 80 06 01 00 10 06 07 00 81 23 80 80 05
-01 00 10 07 07 00 80 23 FF 00 04 07 02 10 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 04 00 00 00 00 40 06 00
-01 00 00 00 E2 08 D7 8D C3 BB 0D 10 B1 2B 1E D1
-50 CC 67 1C 5B F0 73 98 CC F9 F4 28 99 45 34 B7
-69 66 AF 3A 0C C5 2B D5 D0 B4 67 10 87 EB BD 55
-9C 4D 35 77 13 F1 3B 6B 50 30 8C FB 3B 16 EF DE
-3E 65 4F AA 48 45 51 88 EA 1A D0 22 2C 55 98 49
-6F 22 DB 85 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 EC 10 EC 10 68 81 68 81 00 00 00 00
-00 00 00 00 00 00 00 A2 00 A2 00 67 F8 00 00 00
-1F F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

external/cache/sources/linuxpg/8168EEF.cfg

@@ -1,53 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-CONFIG1 = 0F
-;Asf Disable
-CONFIGx = 1C
-CONFIG3 = 60
-;Asf Enable
-;CONFIGx = 5D
-;CONFIG3 = E0
-
-CONFIG4 = 14
-CONFIG5 = 82
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 8A
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-LEDCFG = 98 CA
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8168EL.cfg

@@ -1,48 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-VID = 10 EC
-DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 3C
-CONFIG3 = 60
-CONFIG4 = 14
-CONFIG5 = 82
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 8A
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8168EL.map

@@ -1,32 +0,0 @@
-29 81 00 E0 4C 68 00 01 EC 10 68 81 EC 10 23 01
-01 00 00 00 68 4C E0 00 CA C9 30 FF 18 51 00 18
-52 CF 18 53 3C 18 54 60 18 55 14 18 56 82 50 42
-C3 FF 40 30 00 FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

external/cache/sources/linuxpg/8168ELEF.cfg

@@ -1,51 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 3C
-CONFIG3 = 60
-CONFIG4 = 14
-CONFIG5 = 82
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 8A
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 1:PHY Disable
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-VERSION = 1.031

external/cache/sources/linuxpg/8168EPEF.cfg

@@ -1,78 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-;ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 1:PHY Disable    BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;Multi Function Configuration.
-;Enable Multi function set to 01H, Disable Multi function set to 00H
-;MULTIFUN = 01
-
-;Link Capability
-;PHYGBCR = 02 00
-;PHYANAR = 01 E1
-
-;LEDSUBCFG
-;Please make sure CONFIGX LED low power bit enabled
-;(IO reg offset 0x53 bit 2 set to 0) before modifying LEDSUBCFG
-;BIT 0:LED0 Low Power Enable in D3cold    BIT 1:LED1 Low Power Enable in D3cold
-;BIT 2:LED2 Low Power Enable in D3cold
-;BIT 3:LED0 Preboot Enable    BIT 4: LED1 Preboot Enable
-;BIT 5:LED2 Preboot Enable
-;LEDSUBCFG = 00
-
-;EHCI PMC
-;Enable EHCI PME_D3cold & PME_D3hot support in PMC
-;Please Do Not program this item if system does not support modern standby.
-EHCIPMC = C3 FF
-
-;Secure boot
-;SECUREBOOT = 01
-VERSION = 1.031
-

external/cache/sources/linuxpg/8168F.cfg

@@ -1,48 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-VID = 10 EC
-DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 3C
-CONFIG3 = 60
-CONFIG4 = 14
-CONFIG5 = 82
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 8A
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8168F.map

@@ -1,32 +0,0 @@
-29 81 00 E0 4C 68 00 01 EC 10 68 81 EC 10 23 01
-01 00 00 00 68 4C E0 00 CA C9 30 FF 18 51 00 18
-52 CF 18 53 3C 18 54 60 18 55 14 18 56 82 50 42
-C3 FF 40 30 00 FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

external/cache/sources/linuxpg/8168FB.cfg

@@ -1,49 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-VID = 10 EC
-DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 3C
-CONFIG3 = 60
-CONFIG4 = 14
-CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-CONFIG7 = 07
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8168FB.map

@@ -1,32 +0,0 @@
-29 81 00 E0 4C 68 00 01 EC 10 68 81 EC 10 23 01
-01 00 00 00 68 4C E0 00 CA C9 30 FF 18 51 00 18
-52 CF 18 53 3C 18 54 60 18 55 14 18 56 02 50 42
-C3 FF 40 30 00 FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

external/cache/sources/linuxpg/8168FBEF.cfg

@@ -1,57 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 3C
-CONFIG3 = 60
-CONFIG4 = 14
-CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 07
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 1:PHY Disable
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;Link Capability
-;PHYGBCR = 03 00
-;PHYANAR = 01 E1
-VERSION = 1.031
-

external/cache/sources/linuxpg/8168FEF.cfg

@@ -1,53 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-CONFIG0 = 00
-CONFIG1 = CF
-CONFIGx = 3C
-CONFIG3 = 60
-CONFIG4 = 14
-CONFIG5 = 82
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 8A
-PMC = C3 FF
-ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 1:PHY Disable
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-VERSION = 1.031
-
-

external/cache/sources/linuxpg/8168FPEF.cfg

@@ -1,80 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 1:PHY Disable    BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;Link Capability
-;PHYGBCR = 02 00
-;PHYANAR = 01 E1
-
-;LEDSUBCFG
-;Please make sure CONFIGX LED low power bit enabled
-;(IO reg offset 0x53 bit 2 set to 0) before modifying LEDSUBCFG
-;BIT 0:LED0 Low Power Enable in D3cold    BIT 1:LED1 Low Power Enable in D3cold
-;BIT 2:LED2 Low Power Enable in D3cold
-;BIT 3:LED0 Preboot Enable    BIT 4: LED1 Preboot Enable
-;BIT 5:LED2 Preboot Enable
-;LEDSUBCFG = 00
-
-;Disable: 00, Enable: 01
-;UPS mode power saving
-;UPSMODEPWRSAVING = 00
-;Secure boot
-;SECUREBOOT = 01
-
-;EHCI PMC
-;Enable EHCI PME_D3cold & PME_D3hot support in PMC
-EHCIPMC = C3 FF
-
-;PCIE Link Capability
-;LINKPCIEGEN = 11
-
-;Disable multi-function X
-;DISABLEFUNCX = 00
-VERSION = 1.031
-

external/cache/sources/linuxpg/8168G.cfg

@@ -1,50 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-VID = 10 EC
-DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031
-

external/cache/sources/linuxpg/8168G.map

@@ -1,32 +0,0 @@
-29 81 00 E0 4C 68 00 01 EC 10 68 81 EC 10 23 01
-01 00 00 00 68 4C E0 00 CA C9 30 FF 18 51 00 18
-52 CF 18 53 3C 18 54 62 18 55 14 18 56 02 50 42
-C3 FF 40 30 00 FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

external/cache/sources/linuxpg/8168GEF.cfg

@@ -1,59 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable(32pin chip not support)     BIT 1:PHY Disable    BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;Link Capability
-;PHYGBCR = 02 00
-;PHYANAR = 01 E1
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031
-

external/cache/sources/linuxpg/8168GU.cfg

@@ -1,49 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-VID = 10 EC
-DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8168GU.map

@@ -1,8 +0,0 @@
-29 81 00 E0 4C 68 00 02 EC 10 68 81 EC 10 23 01
-00 E0 4C 68 00 00 00 01 39 ED 3F FF 40 18 04 19
-4C 2A 02 FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

external/cache/sources/linuxpg/8168GUEF.cfg

@@ -1,58 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 1:PHY Disable    BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;Link Capability
-;PHYGBCR = 02 00
-;PHYANAR = 01 E1
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8168H.cfg

@@ -1,49 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-;CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 37
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-;PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8168H.map

@@ -1 +0,0 @@
-29 81 00 E0 4C 68 00 01 EC 10 68 81 EC 10 23 01
00 E0 4C 68 00 00 00 01 84 FA 3F FF 19 4C 30 02
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

external/cache/sources/linuxpg/8168HEF.cfg

@@ -1,65 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-;CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-;PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 1:PHY Disable    BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;Link Capability
-;PHYGBCR = 02 00
-;PHYANAR = 01 E1
-;SpeedUp Capability
-;Enable GPHY speed up by MAC set to 29H, Disable GPHY speed up by MAC set to 21H
-;PHYPWRFUN = 21
-
-;CTAPSHORT
-;Enable set to 01H, Disable set to 00H
-;CTAPSHORT = 01
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8168K.cfg

@@ -1,49 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-;CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 37
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-;PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8168K.map

@@ -1,8 +0,0 @@
-29 81 00 E0 4C 68 00 01 EC 10 68 81 EC 10 23 01
-00 E0 4C 68 00 00 00 01 84 FA 3F FF 19 4C 30 02
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

external/cache/sources/linuxpg/8168KB.cfg

@@ -1,72 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-VID = 10 EC
-DID = 81 62
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;For add-on device, please set CONFIG3 to 60H
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 17
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDXCFG = High-Byte Low-Byte
-;LEDX Bit 11: Low power mode enable
-;LEDX Bit 10: Preboot enable
-;Please make sure CONFIGx LED low power bit enabled
-;(IO reg offset 0x53 bit 2 set to 0) before modifying LED low power mode or LED preboot
-;LED0CFG = 02 01
-;LED1CFG = 02 02
-;LED2CFG = 02 08
-;LED3CFG = 02 20
-;LED Feature Functions
-;Set BIT 0 to 0 : V1 led table.
-;Set BIT 0 to 1 : V2 led table.
-;BIT 1 to BIT 7 : Reserved
-;LEDFEATUREFUNC = 60
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;MDI swap
-;MDI non-swap set to 00H, MDI swap set to 20H
-;MDISWAP = 00
-
-;Tx polarity swap
-;BIT 7: P3 non-swap set to 1, P3 swap set to 0
-;BIT 6: P2 non-swap set to 0, P2 swap set to 1
-;BIT 5: P1 non-swap set to 1, P1 swap set to 0
-;BIT 4: P0 non-swap set to 0, P0 swap set to 1
-;BIT 0 to BIT 3 : Reserved
-;TXPOLSWAP = A0
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8168KBEF.cfg

@@ -1,77 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 62
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-CONFIGx = 3C
-;For add-on device, please set CONFIG3 to 60H
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDXCFG = High-Byte Low-Byte
-;LEDX Bit 11: Low power mode enable
-;LEDX Bit 10: Preboot enable
-;Please make sure CONFIGx LED low power bit enabled
-;(IO reg offset 0x53 bit 2 set to 0) before modifying LED low power mode or LED preboot
-;LED0CFG = 02 01
-;LED1CFG = 02 02
-;LED2CFG = 02 08
-;LED3CFG = 02 20
-;LED Feature Functions
-;Set BIT 0 to 0 : V1 led table.
-;Set BIT 0 to 1 : V2 led table.
-;BIT 1 to BIT 7 : Reserved
-;LEDFEATUREFUNC = 60
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 1:PHY Disable    BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;MDI swap
-;MDI non-swap set to 00H, MDI swap set to 20H
-;MDISWAP = 00
-
-;Tx polarity swap
-;BIT 7: P3 non-swap set to 1, P3 swap set to 0
-;BIT 6: P2 non-swap set to 0, P2 swap set to 1
-;BIT 5: P1 non-swap set to 1, P1 swap set to 0
-;BIT 4: P0 non-swap set to 0, P0 swap set to 1
-;BIT 0 to BIT 3 : Reserved
-;TXPOLSWAP = A0
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8168KEF.cfg

@@ -1,65 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-;CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-;PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 1:PHY Disable    BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;Link Capability
-;PHYGBCR = 02 00
-;PHYANAR = 01 E1
-;SpeedUp Capability
-;Enable GPHY speed up by MAC set to 29H, Disable GPHY speed up by MAC set to 21H
-;PHYPWRFUN = 21
-
-;CTAPSHORT
-;Enable set to 01H, Disable set to 00H
-;CTAPSHORT = 01
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8168L.cfg

@@ -1,49 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-;CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-;CONFIG7 = 37
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-;PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8168L.map

@@ -1,8 +0,0 @@
-29 81 00 E0 4C 68 00 01 EC 10 68 81 EC 10 23 01
-00 E0 4C 68 00 00 00 01 84 FA 3F FF 19 4C 30 02
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

external/cache/sources/linuxpg/8168LEF.cfg

@@ -1,65 +0,0 @@
-NODEID = 00 E0 4C 68 00 01
-;ENDID = 00 E0 4C 68 FF FF
-;VID = 10 EC
-;DID = 81 68
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-;CONFIG0 = 00
-;CONFIG1 = CF
-;CONFIGx = 3C
-;CONFIG3 = 60
-;CONFIG4 = 14
-;CONFIG5 = 02
-;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
-;CONFIG5 = 0A
-CONFIG7 = 07
-;PMC = C3 FF
-;ROMBAR = 00
-;LEDCFG = High-Byte(19H) Low-Byte(18H)
-;LEDCFG = 0C A9
-;Prefetchable memory access. Non-Prefetchable set to 04H, Prefetchable set to 0CH
-;PREFETCHABLE = 04
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;           00 ==> PXE protocol
-;           01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;           00 ==> ROM disable
-;           01 ==> Int 18h
-;           10 ==> Int 19h
-;           11 ==> PnP/BEV(BBS)
-;Bit 3      Show Config Message
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;           00 ==> 3 Seconds
-;           01 ==> 5 Seconds
-;           10 ==> 1 Seconds
-;           11 ==> 0 Second
-
-;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
-
-;LANCFG
-;BIT 0:LAN Disable     BIT 1:PHY Disable    BIT 2:Link OK
-;BIT 31:Clear LANCFG
-;LANCFG = 00 00 00 00
-
-;Link Capability
-;PHYGBCR = 02 00
-;PHYANAR = 01 E1
-;SpeedUp Capability
-;Enable GPHY speed up by MAC set to 29H, Disable GPHY speed up by MAC set to 21H
-;PHYPWRFUN = 21
-
-;CTAPSHORT
-;Enable set to 01H, Disable set to 00H
-;CTAPSHORT = 01
-
-;DISFUNCXIOBAR = 00
-VERSION = 1.031

external/cache/sources/linuxpg/8169.cfg

@@ -1,39 +0,0 @@
-NODEID = 00 E0 4C 69 00 01
-;ENDID = 00 E0 4C 69 FF FF
-VID = 10 EC
-DID = 81 69
-SVID = 10 EC
-SMID = 01 23
-
-;Do not change following parameters without Realtek approval
-MNGNT = 20
-MXLAT = 40
-CONFIGx = 01
-CONFIG3 = A1
-CONFIG0 = 15
-CONFIG1 = CD
-CONFIG4 = 80
-CONFIG5 = 13
-PMC = C2 F7
-ROMCONF = 3F
-;Bit 7-6    Boot Protocol
-;	    00 ==> PXE protocol
-;	    01 ==> RPL protocol
-;Bit 5-4    Boot order (method)
-;	    00 ==> ROM disable
-;	    01 ==> Int 18h
-;	    10 ==> Int 19h
-;	    11 ==> PnP/BEV(BBS)
-;Bit 3	    Show Config Message
-;	    0 ==> Enable
-;	    1 ==> Disable
-;Bit 2      Shift+F10 Menu Entry
-;           0 ==> Enable
-;           1 ==> Disable
-;Bit 1-0    Show Config Time
-;	    00 ==> 3 Seconds
-;	    01 ==> 5 Seconds
-;	    10 ==> 1 Seconds
-;	    11 ==> 0 Seconds
-VERSION = 1.031
-